Mechanical Properties of Soft Magnetic Composites at the Temperature of Liquid Nitrogen

• Authors: M. Przybylski , D. Kapelski , B. Ślusarek
• Languages of publication: EN

Abstracts

EN

Soft magnetic composites are used in a wide range of applications working in different environmental conditions, between others, in different temperatures. Nowadays, devices often work in cryogenic temperatures. The paper shows influence of liquid nitrogen temperature on mechanical properties of soft magnetic composites prepared from ABC100.30 powder bonded by epoxy resin. Mechanical properties of samples were measured in room and liquid nitrogen temperatures. Compressive strength and transverse rapture strength increase with decreasing temperature. This type of soft magnetic composite can be applied in magnetic circuits of devices working in cryogenic temperatures. The results of measurement show that new devices, especially electric machines, working in these temperatures can be designed with higher mechanical loadings than devices working at room temperature.

Keywords

EN

75.50.Cc; 81.05.Zx; 81.20.Ev; 81.70.Bt

Discipline

• 81.05.Zx: New materials: theory, design, and fabrication
• 81.20.Ev: Powder processing: powder metallurgy, compaction, sintering, mechanical alloying, and granulation
• 81.70.Bt: Mechanical testing, impact tests, static and dynamic loads(see also 62.20.M- Structural failure of materials; 46.50.+a Fracture mechanics, fatigue, and cracks)
• 75.50.Cc: Other ferromagnetic metals and alloys

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2017
• Volume: 131
• Issue: 5
• Pages: 1199-1203

Dates

published

2017-05

Contributors

author

M. Przybylski

• Tele & Radio Research Institute, Ratuszowa 11, 03-450 Warsaw, Poland

author

D. Kapelski

• Tele & Radio Research Institute, Ratuszowa 11, 03-450 Warsaw, Poland

author

B. Ślusarek

• Tele & Radio Research Institute, Ratuszowa 11, 03-450 Warsaw, Poland

References

• [1] B. Ślusarek, Prz. Elektrotechniczny 86, 16 (2010)
• [2] J.A. Bas, J.A. Calero, M.J. Dougan, J. Magn. Magn. Mater. 254-255, 391 (2003), doi: 10.1016/S0304-8853(02)00934-4
• [3] M.R. Marucci, K.S. Narasimhan, in: Proc. Euro PM2011 Congress & Exhibition, Barcelona (Spain), 2011, p. 285
• [4] H. Shokrollahi, K. Janghorban, J. Mater. Process. Technol. 189, 1 (2007), doi: 10.1016/j.jmatprotec.2007.02.034
• [5] L. Frayman, S. Quinn, R. Quinn, D. Green, F. Hanejko, Powder Metall. 58, 335 (2015), doi: 10.1080/00325899.2015.1133080
• [6] S.H. Lee, Y.J. Kim, K.S. Lee, S.J. Kim, J. Magn. 20, 444 (2015), doi: 10.4283/JMAG.2015.20.4.444
• [7] A. Schoppa, P. Delarbre, IEEE Trans. Magn. 50, 2004304 (2014), doi: 10.1109/TMAG.2013.2290135
• [8] T. Ishikawa, Y. Sato, N. Kurita, IEEE Trans. Magn. 50, 8105304 (2014), doi: 10.1109/TMAG.2014.2334706
• [9] L. Długiewicz, J. Kołowrotkiewicz, B. Ślusarek, W. Szeląg, in: Proc. 21th Symp. on Power Electronics, Electrical Drives, Automation and Motion - SPEEDAM, Sorrento (Italy), Eds.: E. Pagano, E. Yamada, IEEE, 2012, p. 822
• [10] D. Kapelski, B. Jankowski, M. Przybylski, B. Ślusarek, Techn. Trans. Electr. Eng. 112, 281 (2015), doi: 10.4467/2353737XCT.15.049.3849
• [11] J. Kołowrotkiewicz, M. Barański, W. Szeląg, L. Długiewicz, Compel - Int. J. Comp. Math. Electr. Electron. Eng. 26, 952 (2007), doi: 10.1108/03321640710756294
• [12] Y. Abe, A.A. Nakagawa, M. Watada, S. Torri, K. Yamane, D. Ebihara, IEEE Trans. Magn. 32, 5025 (1996), doi: 10.1109/20.539364
• [13] I.R. Walker, Rev. Sci. Instrum. 64, 814 (1993), doi: 10.1063/1.1144165
• [14] B. Ślusarek, M. Przybylski, in: Proc. 13th Symp. on Fundamental Problems of Power Electronics Electromechanics and Mechatronics - PPEEm, Wisła (Poland), Ed. K. Kluszczyński, Polish Scientific Society for Theoretical and Applied Electrical Engineering, 2009, p. 226
• [15] B. Jankowski, D. Kapelski, M. Karbowiak, M. Przybylski, B. Ślusarek, Powder Metall. 57, 155 (2014), doi: 10.1179/1743290114Y.0000000086
• [16] B. Ślusarek, J. Gromek, M. Przybylski, B. Jankowski, D. Kapelski, M. Karbowiak, in: Proc. 15th Int. Symp. on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering - ISEF, Funchal (Portugal), Eds.: C.L. Antunes, S. Wiak, Portuguese Association for the Development of Electrical Engineering (APDEE), Coimbra 2011
• [17] B. Ślusarek, P. Gawryś, M. Przybylski, Stud. Appl. Electromagn. Mech. 30, 34 (2008), doi: 10.3233/978-1-58603-895-3-34
• [18] D. Kapelski, B. Jankowski, M. Przybylski, B. Ślusarek, Arch. Metall. Mater. 60, 1323 (2015), doi: 10.1515/amm-2015-0123
• [19] M. Urbaniak, Polimery 56, 240 (2011)
• [20] J. Rieger, Polym. Test 20, 199 (2001), doi: 10.1016/S0142-9418(00)00023-4
• [21] A. Hale, C.W. Macosko, H.E. Bair, Macromolecules 24, 2610 (1991), doi: 10.1021/ma00009a072

Identifiers

DOI

10.12693/APhysPolA.131.1199