PL EN


Preferences help
enabled [disable] Abstract
Number of results
2014 | 125 | 2 | 452-453
Article title

Fabricating of Steel/Cast Iron Composite by Casting Route

Content
Title variants
Languages of publication
EN
Abstracts
EN
In this study, 1.2333 cold work tool steel and cast iron (GG 25) were simultaneously melted in different furnaces to fabricate composite die mold used in sheet metal forming industry. To enhance the metallurgical bond between two components of composite part, the pouring temperature of cast iron was assessed just above the solidus temperature, then metallurgically prepared cast iron was poured on to the cast tool steel. The temperature and casting parameters were monitored and simulated. Experimental and simulation results were compared, finally the optimum parameters and casting route were revealed.
Keywords
Contributors
author
  • Faculty of Engineering, University of Sakarya, Esentepe, 54187, Turkey
  • Faculty of Engineering, University of Sivas, Turkey
author
  • Faculty of Engineering, University of Sakarya, Esentepe, 54187, Turkey
  • Faculty of Engineering, University of Sivas, Turkey
author
  • Faculty of Engineering, University of Sakarya, Esentepe, 54187, Turkey
  • Faculty of Engineering, University of Sivas, Turkey
author
  • Faculty of Engineering, University of Sakarya, Esentepe, 54187, Turkey
  • Faculty of Engineering, University of Sivas, Turkey
References
  • 1. Xiuling Su, Ph.D. thesis, University of Cincinnati, 2001
  • 2. Xinyu Zhou, Ph.D. thesis, University of Cincinnati, 2005
  • 3. L. Guobin, W. Jianjun, L. Xiangzhi, L. Guiyun, doi: 10.1016/S0924-0136(97)00318-X, J. Mater. Proc. Technol. 75, 152 (1998)
  • 4. L. Mehnen, H. Pfutzner, E. Kaniusas, doi: 10.1016/S0304-8853(00)00286-9, J. Magn. Magn. Mater. 215-216, 779 (2000)
  • 5. J. Nakano, Y. Miwa, T. Tsukada, M. Kikuchi, S. Kita, Y. Nemoto, H. Tsuji, S. Jitsukawa, doi: 10.1016/S0022-3115(02)00965-0, J. Nucl. Mater. 307, 1568 (2002)
  • 6. K.V. Sudakhar, doi: 10.1016/S1350-6307(00)00048-0, Eng. Failure Anal. 9, 221 (2002)
  • 7. O. Yilmaz, H. Çelik, doi: 10.1016/S0924-0136(03)00029-3, J. Mater. Proc. Technol. 141, 67 (2003)
  • 8. B.V. Krishna, P. Venugopal, K.P. Rao, doi: 10.1016/j.msea.2005.06.025, Mater. Sci. Eng. A 407, 77 (2005)
  • 9. U. Patel, S. Suresh, doi: 10.1016/j.jcis.2006.01.047, J. Colloid Interface Sci. 299, 249 (2006)
  • 10. D.C. Ko, S.K. Lee, B.M. Kim, H.H. Jo, H. Jo, doi: 10.1016/j.jmatprotec.2006.11.131, J. Mater. Process. Technol. 186, 22 (2007)
  • 11. M. Şimşir, L.C. Kumruoğlu, A. Özer, doi: 10.1016/j.matdes.2008.04.074, Mater. Des. 30, 264 (2009)
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv125n2091kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.