Full-text resources of PSJD and other databases are now available in the new Library of Science.
Visit https://bibliotekanauki.pl

PL EN


Preferences help
enabled [disable] Abstract
Number of results

Journal

2009 | 7 | 2 | 345-349

Article title

Comparative study of ZnO layers prepared by PLD from different targets at various oxygen pressure levels

Content

Title variants

Languages of publication

EN

Abstracts

EN
Two series of polycrystalline zinc oxide (ZnO) layers, from Zn or ZnO targets, were grown on silicon (1 1 1) substrates by pulsed laser deposition (PLD) at ambient oxygen pressure levels, stepwise increased from 1 to 35 Pa. For ablation of targets, a pulsed Nd:YAG laser was used. The structural and morphological properties of the layers were investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM), and secondary ion mass spectrometry (SIMS). The SEM images of ZnO layers in SE mode show a uniform granular structure and modified surface morphology, depending on oxygen pressure. The mean grain size in height and lateral directions decreases with an increase of oxygen pressure from 1 to 5 Pa, while a subsequent rise of oxygen pressure from 5 to 35 Pa will cause an increase in the grain size. The AFM measurement revealed that the surface structures of zinc oxide layers grown from different targets were similar, and the layers formed at an ambient oxygen pressure of 5 Pa exhibited the smallest values of calculated roughness and granularity. SIMS depth profiling analyses confirmed that the ZnO composition was homogenous across the layer, up to the abrupt change of chemical composition at the interface between the ZnO layer and the Si substrate.

Contributors

  • International Laser Centre, Ilkoviaova 3, Bratislava, 841 04, Slovak Republic
  • International Laser Centre, Ilkoviaova 3, Bratislava, 841 04, Slovak Republic
author
  • International Laser Centre, Ilkoviaova 3, Bratislava, 841 04, Slovak Republic
  • International Laser Centre, Ilkoviaova 3, Bratislava, 841 04, Slovak Republic

References

  • [1] K. Ramamoorthy et al., Curr. Appl. Phys. 6, 103 (2006) http://dx.doi.org/10.1016/j.cap.2004.12.010[Crossref]
  • [2] J.-H. Lim et al., Adv. Mater. 18, 2720 (2006) http://dx.doi.org/10.1002/adma.200502633[Crossref]
  • [3] G. Tobin et al., Physica B 340-342, 245 (2003) http://dx.doi.org/10.1016/j.physb.2003.09.016[Crossref]
  • [4] S. J. Pearton, D. P. Norton, K. Ip, Y. W. Heo, T. Steiner, Superlattice. Microst. 34, 3 (2003) http://dx.doi.org/10.1016/S0749-6036(03)00093-4[Crossref]
  • [5] A. Kobayashi, Y. Shirakura, K. Miyamura, J. Ohta, H. Fuioka, J. Cryst. Growth 305, 70 (2007) http://dx.doi.org/10.1016/j.jcrysgro.2007.04.027[Crossref]
  • [6] A. E. Suliman, Y. Tang, L. Xu, Sol. Energ. Mat. Sol. C. 91, 1658 (2007) http://dx.doi.org/10.1016/j.solmat.2007.05.014[Crossref]
  • [7] N. W. Emanetoglu, C. Gorla, Y. Liu, S. Liang, Y. Lu, Mat. Sci. Semicon. Proc. 2, 247 (1999) http://dx.doi.org/10.1016/S1369-8001(99)00022-0[Crossref]
  • [8] M. Jung, J. Lee, S. Park, H. Kim, J. Chang, J. Cryst. Growth 283, 384 (2005) http://dx.doi.org/10.1016/j.jcrysgro.2005.06.047[Crossref]
  • [9] H. Miyashita, T. Satoh, T. Hirate, Superlattice. Microst. 39, 67 (2006) http://dx.doi.org/10.1016/j.spmi.2005.08.031[Crossref]
  • [10] A. El-Shaer, A. Ch. Mofor, A. Bakin, M. Kreye, A. Waag, Superlattice. Microst. 38, 265 (2005) http://dx.doi.org/10.1016/j.spmi.2005.08.025[Crossref]
  • [11] N. M. Sbrockey, S. Ganesan, III-Vs Review 17, 23 (2004) http://dx.doi.org/10.1016/S0961-1290(04)00735-5[Crossref]
  • [12] S. S. Kim, B.-T. Lee, Thin Solid Films 446, 307 (2004) http://dx.doi.org/10.1016/j.tsf.2003.09.057[Crossref]
  • [13] Z. G. Zhang et al., Physica E 39, 253 (2007) http://dx.doi.org/10.1016/j.physe.2007.05.028[Crossref]
  • [14] Y. Y. Villanueva, D.-R. Liu, P. T. Cheng, Thin Solid Films 501, 366 (2006) http://dx.doi.org/10.1016/j.tsf.2005.07.152[Crossref]

Document Type

Publication order reference

Identifiers

YADDA identifier

bwmeta1.element.-psjd-doi-10_2478_s11534-009-0047-3
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.