Effect of Boronizing on the Oxidation Resistance of 316L Stainless Steel

• Authors: M. Khenifer , O. Allaoui , M. Taouti
• Languages of publication: EN

Abstracts

EN

The effect of boronizing treatment on oxidation at high temperature on 316L stainless steel was studied at 850, 900, 950, and 1000°C in air, for holding times between 0.25 and 24 h. The oxidation resistance of unboronized and boronized specimens was studied isothermally by thermogravimetric analyzer. The oxidation rate constant represented as a parabolic rate constant K_{p} was evaluated. Optical microscopy, X-ray diffraction, and the scanning electron microscopy were used for surface characterizations. The experimental results show that boronized coating increases the resistance of stainless steel 316l about twice and prevents oxygen from penetrating into the stainless steel substrate at the temperatures between 850 and 1000°C.

Keywords

EN

316L stainless steel; boronizing; high temperature oxidation; oxidation kinetics; rate constant

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2017
• Volume: 132
• Issue: 3
• Pages: 518-520

Dates

published

2017-09

Contributors

author

M. Khenifer

• Laboratoire Génie des Procédés, Université de Laghouat, BP 37G, Laghouat, Algeria

author

O. Allaoui

• Laboratoire Génie des Procédés, Université de Laghouat, BP 37G, Laghouat, Algeria

author

M. Taouti

• Laboratoire de Physico-chimie des Matériaux, Université de Laghouat, BP 37G, Laghouat, Algeria

References

• [1] P.E. Busby, M.E. Warga, C. Wells, Trans. AIME 197, 1463 (1953)
• [2] S. Kirtay, Acta. Phys. Pol. A 128, B-90 (2015), doi: 10.12693/APhysPolA.128.B-90
• [3] K.-H. Habig, Mater. Des. 2, 83 (1980), doi: 10.1016/0261-3069(80)90018-7
• [4] H. Kunst, O. Schaaber, Harterei-Technische Mittenlungen 22, 275 (1967)
• [5] M.A. Pchelkina, Yu.M. Lakhtin, Met. Sci. Heat Treatm. Met. 2, 397 (1960), doi: 10.1007/BF00666740
• [6] A.F. Zhigach, I.S. Antonov, M.A. Pchelkina, G.I. Yukin, A.S. Dobrodeev, V.N. Matveev, Met. Sci. Heat Treatm. Met. 1, 51 (1959) http://link.springer.com/article/10.1007/BF00820275
• [7] R.H. Biddulph, Thin Solid Films 45, 341 (1977), doi: 10.1016/0040-6090(77)90267-X
• [8] R.H. Biddulph, Heat Treat. Met. 3, 95 (1974)
• [9] H. Ornig, O. Schaaber, Harterei-Technische Mittenlungen 17, 131 (1962)
• [10] L.S. Lyakhovich, S.S. Bragilevskaya, F.V. Dolmanov, in: Konvektivnomu Teplo-Massoobmenu, Ed. B.M. Smol'skii, Inst. Teplo-Massoobmena, Akad. Nauk Beloruss. SSR, Minsk, USSR 1970, p. 174
• [11] J. Rus, C. Luis De Leal, D.N. Tsipas, J. Mater. Sci. Lett. 4, 558 (1985), doi: 10.1007/BF00720032
• [12] G. Palombarini, M. Carbucicchio, J. Mater. Sci. Lett. 3, 791 (1984), doi: 10.1007/BF00727975
• [13] M. Carbucicchio, G. Palombarini, Hyperfine Interact. 83, 91 (1994), doi: 10.1007/BF02074262
• [14] M. Carbucicchio, L. Bardani, G. Palombarini, J. Mater. Sci. 15, 711 (1980), doi: 10.1007/BF00551738
• [15] P. Goeuriot, F. Thevenot, J.H. Driver, Thin Solid Films 78, 67 (1981), doi: 10.1016/0040-6090(81)90418-1
• [16] M. Carbucicchio, G. Meazza, G. Palombarini, J. Mater. Sci. 17, 3123 (1982), doi: 10.1007/BF01203474
• [17] S. Şahin, J. Mater. Process. Technol. 209, 1736 (2009), doi: 10.1016/j.jmatprotec.2008.04.040
• [18] D. Monceau, B. Pieraggi, Oxidat. Met. 50, 477 (1998), doi: 10.1023/A:1018860909826
• [19] A. Atkinson, R.I. Taylor, Philos. Mag. A 43, 979 (1981), doi: 10.1080/01418618108239506
• [20] L.L. Shreir, R.A. Jarman, G.T. Burstein, Corrosion, Vol. 02, Metal/Environment Reactions, 3rd ed., Butterworth-Heinemann, Oxford 2000, p. 175
• [21] I. Akkurt, A. Calik, H. Akyıldırım, Nucl. Eng. Des. 241, 55 (2011), doi: 10.1016/j.nucengdes.2010.10.009
• [22] A. Calik, S. Akbunar, N. Ucar, N. Yilmaz, S. Karakas, I. Akkurt, Nucl. Technol. Radiat. Protect. 29, 186 (2014)
• [23] I. Akkurt, Ann. Nucl. En. 36, 1702 (2009), doi: 10.1016/j.anucene.2009.09.005

Identifiers

DOI

10.12693/APhysPolA.132.518