Wear Properties of Hybrid Epoxy Composites Reinforced with Carbon/Kevlar/Glass Fabrics

• Authors: İ. Kartal , H. Demirer
• Languages of publication: EN

Abstracts

EN

The aim of this study is to investigate the effect of hybridization of fabrics on wear properties of epoxy composites and to relate them to impact properties. With this aim carbon/glass/Kevlar fabrics were hybridized to reinforce epoxy composites. Epoxy composites reinforced with only carbon, glass or Kevlar fabrics were also prepared as reference composites. The wear tests were carried out using a pin-on-disk device. The wear surfaces of composite specimens were examined by scanning electron microscopy to investigate the different behavior of three distinct fabrics in the hybrid composites. The results have shown that carbon fabric reinforced epoxy composite exhibited the highest wear resistance, whereas the wear resistance of Kevlar fabric reinforced epoxy composite was the lowest. As expected, the wear resistance of hybrid composites was lower than that of only carbon fabric reinforced composites.

Keywords

EN

81.40.Pq

Discipline

• 81.40.Pq: Friction, lubrication, and wear

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2017
• Volume: 131
• Issue: 3
• Pages: 559-561

Dates

published

2017-03

Contributors

author

İ. Kartal

• Marmara University, Faculty of Technology, 34720 Istanbul, Turkey

author

H. Demirer

• Marmara University, Faculty of Technology, 34720 Istanbul, Turkey

References

• [1] L.Y. Lin, J.H. Lee, C.E. Hong, G.H. Yoo, S.G. Advani, Compos. Sci. Tech. 66, 2116 (2006), doi: 10.1016/j.compscitech.2005.12.025
• [2] V.K. Polineni, A. Wang, A. Essner, R. Lin, A. Chopra, C. Stark, J.H. Dumbleton, ASTM Spec. Tech. Pub. 1346, 266 (1998), doi: 10.1520/STP12844S
• [3] K. Dong, J. Zhang, M. Cao, M. Wang, B. Gu, B. Sun, Polym. Test. 55, 44 (2016), doi: 10.1016/j.polymertesting.2016.08.009
• [4] Y.Z. Wan, J.J. Lian, Y. Huang, F. He, Y.L. Wang, H.J. Jiang, H.Y. Xin, J. Mater. Sci. 42, 1343 (2007), doi: 10.1007/s10853-006-1215-0
• [5] C.K. Schreiber, Br. Dent. J. 137 21 (1974), doi: 10.1038/sj.bdj.4802623
• [6] S.W. Ha, A. Gisep, J. Mayer, E. Wintermantel, H. Gruner, M. Wieland, J. Mater. Sci. Mater. Med. 8, 891 (1997), doi: 10.1023/A:1018562023599
• [7] G.V.B. Cochran, V.R. Palmieri, R.E. Zickel, Clin. Biomech. 9, 315 (1994), doi: 10.1016/0268-0033(94)90045-0
• [8] J.J. Rajesh, J.T. Bijwe, U.S. Tewari Wear 252, 769 (2002), doi: 10.1016/S0043-1648(02)00039-X
• [9] S. Fakirov, D. Bhattacharya, Synthetic Polymer-Polymer Composites, Hanser Publishers, 2012, p. 465, doi: 10.3139/9781569905258.008

Identifiers

DOI

10.12693/APhysPolA.131.559