Full-text resources of PSJD and other databases are now available in the new Library of Science.
Visit https://bibliotekanauki.pl

PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 131 | 2 | 252-254

Article title

Investigation of the Erosive Wear Resistance of Boronized Ash-Blowing Nozzles

Content

Title variants

Languages of publication

EN

Abstracts

EN
In this study, pack boronizing was applied to ash-blowing nozzles manufactured from AISI 1040 steels using Ekabor II powders as the boronizing source at a temperature of 1273 K for a duration of 8 h. Erosive wear tests of boride ash-blowing nozzles were carried out in ash delivery line of thermal reactor under actual working conditions. It was observed that erosive wear resistance of borided ash-blowing nozzles were increased 3 times as a result of the boronizing process. The improved wear resistance of the borided samples can be explained by increased surface hardness and higher work hardening.

Keywords

Year

Volume

131

Issue

2

Pages

252-254

Physical description

Dates

published
2017-02
received
2016-08-04

Contributors

author
  • Manufacturing Engineering Department, Faculty of Technology, Suleyman Demirel University, Isparta, Turkey
author
  • Manufacturing Engineering Department, Faculty of Technology, Suleyman Demirel University, Isparta, Turkey
author
  • Materials Science and Engineering Department, Faculty of Engineering, Cankaya University, Ankara, Turkey
author
  • Physics Department, Faculty of Arts and Sciences, Suleyman Demirel University, Isparta, Turkey

References

  • [1] E. Yuruker, The Effect of Erodent Particle Size Distribution on Erosive Wear, Kocaeli University, Thesis, İzmit 2010, (in Turkish)
  • [2] M. Bagci, H. Imrek, in: 5th International Advanced Technologies Symposium (IATS 2009), Karabük (Turkey), Eds. M. Acarer, H.I. Demirci, C. Gologlu, Karabük University Press, Karabük (Turkey) 2009, p. 765
  • [3] E. Atik, Mater. Struct. 31, 418 (1998), doi: 10.1007/BF02480716
  • [4] C.H. Xu, J.K. Xi, W. Gao, J. Mater. Process. Technol. 65, 1 (1997), doi: 10.1016/0924-0136(95)02247-3
  • [5] A.G. Matuschka, Boronising, Carl Hanser Verlag, München 1980
  • [6] B. Selcuk, R. Ipek, M.B. Karamis, V. Kuzucu, J. Mater. Process. Technol. 103, 310 (2000), doi: 10.1016/S0924-0136(99)00488-4
  • [7] S. Sahin, C. Meric, Mater. Res. Bull. 37, 971 (2002), doi: 10.1016/S0025-5408(02)00697-9
  • [8] A.K. Sinha, in: ASM International Handbook, Vol. 4, The Materials International Society, Materials Park (OH) 1991, p. 437
  • [9] B.S. Mann, Wear 208, 125 (1997), doi: 10.1016/S0043-1648(96)07374-7
  • [10] R. Hu, G.R. Fenske, L.E. Rehn, P.M. Baldo, A. Erdemir, R.H. Lee, R.A. Erck, Surf. Coat. Technol. 42, 3 (1990), doi: 10.1016/0257-8972(90)90159-A
  • [11] A.G. Wang, I.M. Hutchings, Wear 124, 2 (1988), doi: 10.1016/0043-1648(88)90241-4
  • [12] U. Sen, Thin Solid Films 483, 152 (2005), doi: 10.1016/j.tsf.2005.01.008
  • [13] E. Garcia-Bustos, M.A. Figueroa-Guadarrama, G.A. Rodríguez-Castro, O.A. Gómez-Vargas, E.A. Gallardo-Hernández, I. Campos-Silva, Surf. Coat. Technol. 215, 241 (2013), doi: 10.1016/j.surfcoat.2012.08.090
  • [14] G.M. Green, R. Taggart, D.H. Polonis, Metallography 14, 3 (1981), doi: 10.1016/j.surfcoat.2012.08.090
  • [15] U. Er, B. Par, in: in: 2nd International Boron Symposium, Eds. H. Ozdag, H. Akdas, V. Bozkurt, M. Iphar, Osmangazi University Press, Eskisehir (Turkey) 2004, p. 207
  • [16] E. Yilmaz, N. Ucar, A. Calik, S. Karakas, R. Selbas, J. Balkan Tribol. Assoc. 17, 4 (2011)
  • [17] E. Atık, U. Yunker, C. Merıc, Tribol. Int. 36, 155 (2003), doi: 10.1016/S0301-679X(02)00069-5

Document Type

Publication order reference

Identifiers

YADDA identifier

bwmeta1.element.bwnjournal-article-appv131n208kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.