Influences of Production Method and Minor Chemical Composition Changes on the Microstructure of the Alloy: Fe_{62-x}Co₁₀Y₈MoₓB₂₀ (where x=1 or 2)

• Authors: M. Nabiałek , S. Garus
• Languages of publication: EN

Abstracts

EN

In this work, the results of studies concerning the structure of polycrystalline and amorphous alloys are presented. The samples were produced in a single-step production process, using two different production methods, and under a protective argon atmosphere. The quenching speed of the molten alloy was different for each of the production methods. Samples were subjected to analysis using X-ray diffractometry, scanning electron microscopy, and computer tomography. It has been shown that the samples manufactured with a higher cooling rate feature an amorphous structure; On the other hand, the samples obtained using the method with the lower cooling speed consist of crystallites of three crystalline phases with sizes of the order of μm. The amorphous samples exhibited a varied fracture surface as well as an increase in the contribution of pores to their volume, in comparison to the samples obtained at the lower cooling speed.

Keywords

EN

75.50.-y; 75.50.Kj; 75.30.Ds; 75.20.En; 75.47.Np; 75.50.Bb; 75.60.Ej

Discipline

• 75.30.Ds: Spin waves(for spin-wave resonance, see 76.50.+g)
• 75.50.-y: Studies of specific magnetic materials
• 75.47.Np: Metals and alloys
• 75.60.Ej: Magnetization curves, hysteresis, Barkhausen and related effects(for hysteresis in ferroelectricity, see 77.80.Dj)
• 75.50.Kj: Amorphous and quasicrystalline magnetic materials
• 75.50.Bb: Fe and its alloys
• 75.20.En: Metals and alloys

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 130
• Issue: 4
• Pages: 1010-1012

Dates

published

2016-10

Contributors

author

M. Nabiałek

• Institute of Physics, Częstochowa University of Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland

author

S. Garus

• Institute of Physics, Częstochowa University of Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland

References

• [1] M. Nabiałek, P. Pietrusiewicz, K. Błoch, J. Alloys Comp. 628, 424 (2015), doi: 10.1016/j.jallcom.2014.12.136
• [2] S. Lesz, R. Szewczyk, D. Szewieczek, A. Bieńkowski, J. Mater. Process. Technol. 157-158, 743 (2004), doi: 10.1016/j.jmatprotec.2004.07.133
• [3] A. Inoue, D.V. Louzguine, Nanostruct. Met. Alloys 152, 152 (2011), doi: 10.1533/9780857091123.1.152
• [4] M. Nabiałek, J. Alloys Comp. 642, 98 (2015), doi: 10.1016/j.jallcom.2015.03.250
• [5] A. Inoue, Acta Mater. 48, 279 (2000), doi: 10.1016/S1359-6454(99)00300-6
• [6] M. Nabiałek, P. Pietrusiewicz, M. Dośpiał, M. Szota, J. Gondro, K. Gruszka, A. Dobrzańska-Danikiewicz, S. Walters, A. Bukowska, J. Alloys Comp. 615, 56 (2014), doi: 10.1016/j.jallcom.2013.12.236
• [7] D. Szewieczek, S. Lesz, J. Mater. Process. Technol. 162-163, 254 (2005), doi: 10.1016/j.jmatprotec.2005.02.017

Identifiers

DOI

10.12693/APhysPolA.130.1010