Structure Properties of AlSi7Mg/SiC Composite Produced by Stir Casting Method

• Authors: J. Cyboroń , M. Karolus , P. Putyra , M. Dyzia , W. Ratuszek
• Languages of publication: EN

Abstracts

EN

The paper presents the structure studies on composites of aluminum alloy matrix with addition of silicon carbide phase (from 5 to 15 vol.% SiC and 10 vol.% SiC + 10 vol.% graphite) obtained by the stir casting method. The aim of this work is to determine the influence of the SiC content and electrical discharge machining processes on the phase composition, microstructure, and values of residual stresses. In order to determine the heterogeneity of the obtained materials, the X-ray diffraction analysis was performed in different sample orientations to the direction of the X-ray beam (perpendicular and parallel), using different geometries (the Bragg-Brentano and grazing incident X-ray diffraction). This work presents the results of the residual stress analysis in the tested composites generated by various content of SiC additives. Residual stresses were determined by both of the ın²ψ and g-ın²ψ X-ray methods. Obtained results shown the significant gradient of residual stress in all cases.

Keywords

EN

81.65.Ps; 83.85.Hf; 81.05.Mh

Discipline

• 81.05.Mh: Cermets, ceramic and refractory composites
• 83.85.Hf: X-ray and neutron scattering
• 81.65.Ps: Polishing, grinding, surface finishing

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 130
• Issue: 4
• Pages: 969-971

Dates

published

2016-10

Contributors

author

J. Cyboroń

• The Institute of Advanced Manufacturing Technology, Wrocławska 37a, Krakow, Poland

author

M. Karolus

• The Institute of Advanced Manufacturing Technology, Wrocławska 37a, Krakow, Poland

author

P. Putyra

• The Institute of Advanced Manufacturing Technology, Wrocławska 37a, Krakow, Poland

author

M. Dyzia

• Silesian University of Technology, Z. Krasińskiego 8, 40-019 Katowice, Poland

author

W. Ratuszek

• The Institute of Advanced Manufacturing Technology, Wrocławska 37a, Krakow, Poland

References

• [1] R. Riedel, Handbook of Ceramic Hard Materials, Vol. 1, Wiley-VCH, Weinheim 2000
• [2] M. Kunieda, B. Lauwers, K.P. Rajurkar, B.M. Schumacher, CIRP Annals Manufact. Technol. 54, 64 (2005), doi: 10.1016/S0007-8506(07)60020-1
• [3] G. Cusanelli, A. Hessler-Wyser, F. Bobard, R. Demellayer, R. Perez, R. Flükiger, J. Mater. Process. Technol. 149, 289 (2004), doi: 10.1016/jmatprotec.2003.11.047
• [4] M. Gostimirovic, P. Kovac, J. Mech. Sci. Technol. 26, 173 (2012), doi: 10.1007/s12206-011-0922-x
• [5] M. Karolus, J. Cyboroń, P. Putyra, M. Dyzia, W. Ratuszek, Mechanik 2, 319 (2015), doi: 10.17814/mechanik.2015.2.97
• [6] A.J. Dolata, M. Dyzia, IOP Conf. Series Mater. Sci. Eng. 35, 1 (2012), doi: 10.1088/1757-899X/35/1/012020
• [7] B. McCusker, R.B. VonDreele, E.D. Cox, D. Louer, P. Scardi, J. Appl. Crystallogr. 32, 36 (1999), doi: 10.1107/S0021889898009856
• [8] S.J. Skrzypek, New Approach to Measuring Residual Macro-Stresses with the Application of the Grazing Angle X-Ray Diffraction Geometry, Uczelniane Wydawnictwa Naukowo-Dydaktyczne, Kraków 2002 (in Polish)
• [9] H. Wawra, D. Kröner, Z. Metallkd. 69, 518 (1978)
• [10] A. Baczmański, C. Braham, W. Seiler, Philos. Mag. 83, 3225 (2003), doi: 10.1080/14786430310001604985

Identifiers

DOI

10.12693/APhysPolA.130.969