The Evolution of Microstructure and Mechanical Properties of Al-Mn-Fe-Si Alloys During Isothermal Annealing

• Authors: M. Poková , M. Zimina , M. Cieslar
• Languages of publication: EN

Abstracts

EN

Recrystallization during isothermal annealing is studied in a twin-roll cast Al-Mn-Fe-Si alloy with Zr addition. Al₃Zr precipitates, which are known to improve the recrystallization resistance by exerting the Zener drag on migrating grain boundaries, form during heat treatment at 450°C. Materials with and without Al₃Zr precipitates are subjected to 4 passes of equal channel angular pressing at room temperature and a submicrometric grain size is achieved. In the course of isothermal annealing materials recrystallize at 400°C, 425°C and 450°C. The time required for recrystallization follows an Arrhenius equation. Recrystallization kinetics is similar independently of the presence of Al₃Zr precipitates. Precipitation of α-Al(Mn,Fe)Si particles is thought to increase the recrystallization resistance in the material without Al₃Zr.

Keywords

EN

68.37.Lp; 68.37.Hk; 81.30.Mh; 81.40.Ef; 61.72.Mm

Discipline

• 68.37.Lp: Transmission electron microscopy (TEM)
• 81.40.Ef: Cold working, work hardening; annealing, post-deformation annealing, quenching, tempering recovery, and crystallization
• 61.72.Mm: Grain and twin boundaries
• 68.37.Hk: Scanning electron microscopy (SEM) (including EBIC)
• 81.30.Mh: Solid-phase precipitation(for precipitation hardening, see 81.40.Cd)

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2015
• Volume: 128
• Issue: 4
• Pages: 746-749

Dates

published

2015-10

Contributors

author

M. Poková

• Charles University in Prague, Faculty of Mathematics and Physics, Department of Physics of Materials, Ke Karlovu 5, Prague 2, 121 16, Czech Republic

author

M. Zimina

• Charles University in Prague, Faculty of Mathematics and Physics, Department of Physics of Materials, Ke Karlovu 5, Prague 2, 121 16, Czech Republic

author

M. Cieslar

• Charles University in Prague, Faculty of Mathematics and Physics, Department of Physics of Materials, Ke Karlovu 5, Prague 2, 121 16, Czech Republic

References

• [1] M. Cabibbo, Mater. Sci. Eng. A 560, 413 (2013), doi: 10.1016/j.msea.2012.09.086
• [2] D. Jiang, J. Ning, J. Sun, Z. Hu, Y. Hou, Trans. Nonferrous Met. Soc. China 18, 248 (2008), doi: 10.1016/S1003-6326(08)60044-8
• [3] Z. Horita, T. Fujinami, M. Nemoto, T. G. Langdon, J. Mater. Process. Tech. 117, 288 (2001), doi: 10.1016/S0924-0136(01)00783-X
• [4] M. Karlík, T. Mánik, H. Lauschmannkarl, J. Alloy Comp. 515, 108 (2012), doi: 10.1016/j.jallcom.2011.11.101
• [5] M. Poková, M. Cieslar, M. Slámová, Int. J. Mater. Res. 100, 391 (2009), doi: 10.3139/146.110029
• [6] M. Poková, M. Cieslar, J. Lacaze, Acta Phys. Pol. A 122, 625 (2012) http://przyrbwn.icm.edu.pl/APP/PDF/122/a122z3p49.pdf
• [7] M. Cieslar, M. Slámová, M. Hájek, J. Veselý, Mater. Sci. Forum 567-568, 325 (2008), doi: 10.4028/www.scientific.net/MSF.567-568.325
• [8] Y. Birol, Scr. Mater. 59, 611 (2008), doi: 10.1016/j.scriptamat.2008.05.016
• [9] M. Vronka, M. Karlik, Key Eng. Mater. 606, 19 (2014), doi: 10.4028/www.scientific.net/KEM.606.19
• [10] M. Poková, M. Cieslar, J. Lacaze, Manufact. Technol. 13, 212 (2012)
• [11] M. Vlach, I. Stulíková, B. Smola, T. Kekule, H. Kudrnová, S. Daniš, R. Gemma, V. Očenášek, J. Málek, D. Tanprayoon, V. Neubert, Mater. Charact. 86, 59 (2013), doi: 10.1016/j.matchar.2013.09.010
• [12] M. Slámová, V. Očenášek, V.V. Voort, Mater. Charact. 52, 165 (2004), doi: 10.1016/j.matchar.2003.10.010
• [13] H. Weiland, S. Cheong, Mater. Sci. Forum 558-559, 383 (2007), doi: 10.4028/www.scientific.net/MSF.558-559.383
• [14] Z. Jia, G. Hu, B. Forbord, J.K. Solberg, Mater. Sci. Eng. A 444, 284 (2007), doi: 10.1016/j.msea.2006.08.097
• [15] M. Poková, M. Cieslar, Mater. Sci. Eng. IOP Conf. Series 63, 012086 (2014), doi: 10.1088/1757-899X/63/1/012086
• [16] M. Poková, M. Cieslar, J. Lacaze, in: Metal 2012 Conf. Proc., Tanger, spol. s r. o., Brno 2012, p. 1149
• [17] Y. Iwahashi, Z. Horita, M. Nemoto, T.G. Langdon, Acta Mater. 46, 3317 (1997), doi: 10.1016/S1359-6454(97)00100-6
• [18] M. Poková, M. Cieslar, Manufact. Technol. 14, 412 (2014)
• [19] W.C. Liu, J.G. Morris, Metal Mater. Trans. A 36, 2829 (2005), doi: 10.1007/s11661-005-0279-9
• [20] W.C. Liu, B. Radhakrishnan, Mater. Lett. 64, 1829 (2010), doi: 10.1016/j.matlet.2010.05.046
• [21] W.C. Liu, J. Li, H. Yuan, Q.X. Yang, Scr. Mater. 57, 833 (2007), doi: 10.1016/j.scriptamat.2007.07.008
• [22] K. Juany, Y. Li, K. Marthinsen, Mater. Sci. Forum 794-796, 1163 (2014), doi: 10.4028/www.scientific.net/MSF.794-796.1163
• [23] Y.S. Sato, M. Urata, H. Kokawa, K. Ikeda, Mater. Sci. Eng. A 354, 298 (2003), doi: 10.1016/S0921-5093(03)00008-X
• [24] I. Sabirov, M.Y. Murashkin, R.Z. Valiev, Mater. Sci. Eng. A 560, 1 (2013), doi: 10.1016/j.msea.2012.09.020

Identifiers

DOI

10.12693/APhysPolA.128.746