Full-text resources of PSJD and other databases are now available in the new Library of Science.
Visit https://bibliotekanauki.pl

PL EN


Preferences help
enabled [disable] Abstract
Number of results
2014 | 126 | 4 | 875-878

Article title

Influence of Type of Alcohol as the Process Control Agent on Ti-20Ta-20Nb Alloy Preparation by Mechanical Alloying

Authors

Content

Title variants

Languages of publication

EN

Abstracts

EN
In this paper the influence of alcohols as the process control agents on β-Ti alloys preparation using mechanical alloying process was investigated. Three types of alcohols: methanol, ethanol and isopropanol were used in mechanical alloying of Ti-20Ta-20Nb. Pure Ti, Ta, Nb powders and process control agents were alloyed under argon atmosphere in shaker type mill (Spex 8000). Using X-ray diffraction technique, there has been observed the β phase formation after 3 h of mechanical alloying process. Using alcohols as process control agent it is possible to obtain nanocrystalline powders of titanium alloys. The milled powder was sintered in vacuum using hot pressing with high frequency induction heating. It has been shown that sintering process of powders prepared with alcohols as process control agents results in oxides and carbides formation in the alloy structure. Moreover some part of alcohol could evaporate leaving open spaces which results in relatively high porosity of the sinters.

Keywords

EN

Year

Volume

126

Issue

4

Pages

875-878

Physical description

Dates

published
2014-10

Contributors

author
  • Poznań University of Technology, Institute of Materials Science and Engineering, pl. M. Skłodowskiej-Curie 5, 60-965 Poznań, Poland

References

  • [1] R.V. Noort, J. Mater. Sci. 22, 3801 (1987), doi: 10.1007/BF01133326
  • [2] J.A. Davidson, A.K. Mishra, P. Kovacs, R.A. Poggie, Biomed. Mater. Eng. 4, 231 (1994)
  • [3] S.J. Lugowski, D.C. Smith, A.D. McHugh, V. Loon, J. Biomed. Mater. Res. 25, 1443 (1991), doi: 10.1002/jbm.820251204
  • [4] Y. Okazaki, S. Rao, Y. Ito, T. Tateishi Biomaterials 19, 1197 (1998), doi: 10.1016/S0142-9612(97)00235-4
  • [5] M. Niinomi, T. Hattori, K. Morikawa, T. Kasuga, A.`Suzuki, H. Fukui, S. Niwa, Mater. Trans. 43, 2970 (2002), doi: 10.2320/matertrans.43.2970
  • [6] M. Niinomi, M. Nakai, T. Akahori Biomed. Mater. 2, 167 (2007), doi: 10.1088/1748-6041/2/3/S15
  • [7] M. Niinomi, M. Nakai, J. Hieda, Acta Biomater. 8, 3888 (2012), doi: 10.1088/1748-6041/2/3/S15
  • [8] G. Adamek, J. Jakubowicz, Mater. Chem. Phys. 124, 1198 (2010), doi: 10.1016/j.matchemphys.2010.08.057
  • [9] K. Jurczyk, M.U. Jurczyk, K. Niespodziana, J. Jakubowicz, M. Jurczyk, Mater. Chem. Phys. 131, 540 (2011), doi: 10.1016/j.matchemphys.2011.10.020
  • [10] M. Zadra, Mater. Sci. Eng. A 01, 583 (2013), doi: 10.1016/j.msea.2013.06.064
  • [11] W. Lee, S.I. Kwun, J. Alloys Comp. 240, 193 (1996), doi: 10.1016/0925-8388(96)02224-4
  • [12] Y.F. Zhang, L. Lu, S.M. Yap, J. Mater. Proc. Technol. 89-90, 260 (1999), doi: 10.1016/S0924-0136(99)00042-4
  • [13] A. Nouri, P.D. Hodgson, C.E. Wen, Acta Biomater. 6, 1630 (2010), doi: 10.1016/j.actbio.20010.005
  • [14] R. Juarez, J.J. Sunol, R. Berlanga, J. Bonastre, L. Escoda, J. Alloys Comp. 434-435, 472 (2007), doi: 10.1016/j.jallcom.2006.08.108
  • [15] C. Suryanarayana, E. Ivanov, V.V. Boldyrev, Mater. Sci. Eng. A 304-306, 151 (2001), doi: 10.1016/S0921-5093(00)01465-9
  • [16] C. Suryanarayana, Prog. Mater. Sci. 46, 1 (2001) , doi: 10.1016/S0079-6425(99)00010-9
  • [17] S. Kleiner, F. Bertocco, F.A. Khalid, O. Beffort, Mater. Chem. Phys. 89, 362 (2005), doi: 10.1016/j.matchemphys.2004.09.014
  • [18] A. Nouri, C. Wen, Crit. Rev. Solid State Mater. Sci. 39, 81 (2014), doi: 10.1080/10408436.2013.808985
  • [19] M. Zadra, L. Girardini, Mater. Sci. Eng. A 608, 155 (2014), doi: 10.1016/j.msea.2014.04.066 0921-5093
  • [20] B.D. Long, H. Zuhailawati, M. Umemoto, Y. Todaka, R. Othman, J. Alloys Comp. 503, 228 (2010), doi: 10.1016/j.jallcom.2010.04.243
  • [21] R.B. Falcao, E.D.C.C. Dammann, C.J. Da Rocha, R.M.L. Neto, Mater. Sci. Forum 660-661, 329 (2010), doi: 10.4028/www.scientific.net/MSF.660-661.329
  • [22] H. Hiraga, T. Inoue, S. Kamado, Y. Kojima, A. Matsunawac, H. Shimura, Surf. Coat. Technol. 139, 93 (2001), doi: 10.1016/S0257-8972(01)00994-X
  • [23] M. Krasnowski, H. Matyja, J. Alloys Comp. 319, 296 (2001), doi: 10.1016/S0925-8388(01)00912-4
  • [24] B. Gabbitas, P. Cao, S. Raynova, D. Zhang, J. Mater. Sci. 47, 1234 (2012), doi: 10.1007/s10853-011-5886-9
  • [25] P. Scardi, M. Leoni, R. Delhez, J. Appl. Crystallogr. 37, 381 (2004), doi: 10.1107/S0021889804004583
  • [26] D. Oleszak, A. Olszyna, Composites 4, 11 (2004)
  • [27] C.E. Wen, M. Mabuchi, Y. Yamada, K. Shimojima, Y. Chino, T. Asahina, Scr. Mater. 45, 1147 (2001), doi: 10.1016/S1359-6462(01)01132-0
  • [28] I.-H. Oh, N. Nomura, S. Hanada, Mater. Trans. 43, 443 (2002), doi: 10.2320/matertrans.43.443

Document Type

Publication order reference

Identifiers

YADDA identifier

bwmeta1.element.bwnjournal-article-appv126n403kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.