Recycling of Pure Magnesium Chips by Cold Press and Hot Extrusion Processes

• Authors: H. Mindivan , N. Taskin , E. Kayali
• Languages of publication: EN

Abstracts

EN

This study aims to recycle pure magnesium chips by a two-stage mechanical processing method. In the present study, the feasibility of recycling pure magnesium chips with the help of commercially pure magnesium powder was investigated. For this study, the magnesium chips mixed with different amount of magnesium powders in the range of 25-75 wt%, after mixing by hand and cold press, are subjected to hot extrusion to provide homogeneous microstructure. Furthermore, the effect of magnesium powder and their amounts on the mechanical properties and corrosion behaviour of the recycled magnesium alloys were studied. The results of the mechanical and corrosion test showed that the hardness and compressive yield strength decreased with increasing chip content, while increase in the chip weight fraction in the initial mixture resulted in a significant increase of corrosion resistance.

Keywords

EN

72.15.Eb; 81.70.Bt; 82.45.Bb

Discipline

• 82.45.Bb: Corrosion and passivation(see also 81.65.Kn Corrosion protection and 81.65.Rv Passivation in surface treatments)
• 81.70.Bt: Mechanical testing, impact tests, static and dynamic loads(see also 62.20.M- Structural failure of materials; 46.50.+a Fracture mechanics, fatigue, and cracks)
• 72.15.Eb: Electrical and thermal conduction in crystalline metals and alloys

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2014
• Volume: 125
• Issue: 2
• Pages: 429-431

Dates

published

2014-02

Contributors

author

H. Mindivan

• Ataturk University, Engineering Faculty, Department of Metallurgy and Materials Engineering, Erzurum, Turkey

author

N. Taskin

• Istanbul Technical University, Chemical and Metallurgical Engineering Faculty, Metallurgical and Materials Engineering Department, Istanbul, Turkey

author

E. Kayali

• Istanbul Technical University, Chemical and Metallurgical Engineering Faculty, Metallurgical and Materials Engineering Department, Istanbul, Turkey

References

• 1. T. Zhang, Z. Ji, S. Wu, doi: 10.1016/j.matdes.2011.01.012, Mater. Design 32, 2742 (2011)
• 2. H.Ji. Mao-Liang, C. Ze-Sheng, W. Xiao-Yu, D. Qu-dong, T. Wen-Jiang, Nonferr. Metal. Soc. 22, 68 (2012)
• 3. J. Miao, B. Ye, Q. Wang, T. Peng, doi: 10.1016/j.jallcom.2013.01.202, J. Alloys. Comp. 561, 184 (2013)
• 4. Y. Chino, T. Hoshika, M. Mabuchi, doi: 10.1016/j.msea.2006.07.019, Mater. Sci. Eng. A Struct. 435-436, 275 (2006)

Identifiers

DOI

10.12693/APhysPolA.125.429