Wear Behavior of TiAlN and CrAlN Coatings Deposited by TRD Process on AISI D2 Steel

• Authors: B. Kılınc , O. Cegil , S. Sen , U. Sen
• Languages of publication: EN

Abstracts

EN

The wear properties of uncoated, chromium aluminum nitride (CrAlN) and titanium aluminum nitride (TiAlN) coated AISI D2 steel were investigated and compared using ball-on-disc method at 0.3 m/s sliding speed and under the loads of 2.5 N, 5 N, and 10 N against Si_3N_4 ball as a counter material. Steel samples were nitrided at 575C for 8 h in the first step of the coating process, and then titanium aluminum nitride coating and chromium aluminum nitride were performed by thermoreactive deposition (TRD) process at 1000C for 2 h. Coated samples were characterized by X-ray diffraction analysis, scanning electron microscopy, microhardness, and ball on disk wear tests. The results of friction coefficient and wear rate of the tested materials showed that the TiAlN coating presents the lowest results.

Keywords

EN

81.15.-z; 46.55.+d; 81.65.Lp

Discipline

• 46.55.+d: Tribology and mechanical contacts(see also 81.40.Pq Friction, lubrication and wear in materials science; 62.20.Qp Friction, tribology and hardness in mechanical properties of solids)
• 81.15.-z: Methods of deposition of films and coatings; film growth and epitaxy(for structure of thin films, see 68.55.-a; see also 85.40.Sz Deposition technology in microelectronics; for epitaxial dielectric films, see 77.55.Px)
• 81.65.Lp: Surface hardening: nitridation, carburization, carbonitridation

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2014
• Volume: 125
• Issue: 2
• Pages: 362-364

Dates

published

2014-02

Contributors

author

B. Kılınc

• Department of Metallurgical and Materials Engineering, Institute of Arts and Sciences, Sakarya University Esentepe Campus, 54187 Sakarya, Turkey

author

O. Cegil

• Korfez Technical and Industrial Vocational High School, Department of Metal Technology 41780, Korfez/Kocaeli, Turkey

author

S. Sen

• Department of Metallurgical and Materials Engineering, Engineering Faculty, Sakarya University Esentepe Campus, 54187 Sakarya, Turkey

author

U. Sen

• Department of Metallurgical and Materials Engineering, Engineering Faculty, Sakarya University Esentepe Campus, 54187 Sakarya, Turkey

References

• 1. X.Z. Ding, C.T. Bui, X.T. Zeng, doi: 10.1016/j.surfcoat.2008.08.019, Surf. Coat. Technol. 203, 680 (2008)
• 2. H. Unal, U. Sen, A. Mimaroglu, doi: 10.1016/j.matdes.2004.09.004, Mater. Des. 26, 705 (2005)
• 3. K. Bobzin, E. Lugscheider, R. Nickel, N. Bagcivan, A. Kramer, doi: 10.1016/j.wear.2007.01.118, Wear 263, 1274 (2007)
• 4. A. Liu, J. Deng, H. Cui, Y. Chen, J. Zhao, doi: 10.1016/j.ijrmhm.2011.09.010, Int. J. Refract. Met. Hard Mater. 31, 82 (2012)
• 5. B. Gakovi, M. Trtica, B. Radak, S. Petrovi, P. Panjan, M. Cekada, T. Desai, D. Batani, doi: 10.1088/1464-4258/11/1/015601, J. Opt. A 11, 1 (2009)
• 6. H. Scheerer, H. Hoche, E. Broszeit, B. Schramm, E. Abele, C. Berger, doi: 10.1016/j.surfcoat.2005.02.112, Surf. Coat. Technol. 200, 203 (2005)
• 7. M. Uchida, N. Nihira, A. Mitsuo, K. Toyoda, K. Kubota, T. Aizawa, doi: 10.1016/S0257-8972Ž03.00937-X, Surf. Coat. Technol. 177-178, 627 (2004)
• 8. X.Z. Ding, X.T. Zeng, SIMTech Tech. Rep. 6, 1 (2005)
• 9. U. Sen, doi: 10.1016/j.matdes.2004.05.010, Mater. Des. 26, 167 (2005)
• 10. O. Cegil, B. Kılınc, U. Sen, S. Sen, in: IMMC'16 Metallurgy & Materials Congress, Istanbul (Turkey), Eds.: A.F. Dericioglu, K. Kazmanli, S. Timur, C. Durucan, H. Savaş, UCTEA Chamber Of Metallurgical Engineers, Istanbul 2012, p. 453
• 11. B. Kilinc, S. Sen, S. Demirkiran, U. Şen, doi: 10.12693/APhysPolA.123.268, Acta Phys. Pol. A 123, 268 (2013)
• 12. B. Kilinc, S. Sen, U. Sen, doi: 10.12693/APhysPolA.123.271, Acta Phys. Pol. A 123, 271 (2013)
• 13. C. Martini, G. Palombarini, G. Poli, D. Prandstraller, doi: 10.1016/j.wear.2003.10.003, Wear 256, 608 (2004)
• 14. H.S. Benabdallah, R.J. Boness, doi: 10.1023/A:1004719910464, J. Mater. Sci. 34, 4995 (1999)
• 15. V. Chawla, J. Mater. Sci. Eng. A 3, 22 (2013)
• 16. V.H. Derflinger, A. Schutze, M. Ante, doi: 10.1016/j.surfcoat.2005.02.065, Surf. Coat. Technol. 200, 4693 (2006)
• 17. H. Kim, C.Y. Kim, D.W. Kim, I.S. Lee, G.H. Lee, J.C. Park, S.J. Lee, K.Y. Lee, doi: 10.1088/1748-6041/5/4/044108, Biomed. Mater. 044108, 5 (2010)
• 18. K.N. Andersen, E.J. Bienk, K.O. Schweitz, H. Reitz, J. Chevallier, P. Kringhøj, J. Bøttiger, doi: 10.1016/S0257-8972(99)00473-9, Surf. Coat. Technol. 123, 219 (2000)

Identifiers

DOI

10.12693/APhysPolA.125.362