Transformation of Nonstationary Signals into Pseudostationary Signals for the Needs of Vehicle Diagnostics

• Authors: J. Dziurdź
• Languages of publication: EN

Abstracts

EN

Research concerning the development of diagnostic methods of the state of the vehicle driving systems basic elements - have been carried on for many years. Modern diagnostic systems, regardless of being technically highly advanced or small degree only, concern about assessments of basic mechanical subsystems such as toothed gears or suspension elements. The information on state changes of mechanical systems can be obtained by an analysis of changes of nonlinear effects in such systems operations. Since the nonlinearity increase accompanies the system destruction, the separation of nonlinear parts of signals creates the possibility of the increase of an accuracy, reliability and application range of diagnostic methods. Technical state diagnostics for vehicles is much more difficult than for machines operating in stationary conditions. the main excitation source is an internal combustion engine, in which a rotational speed changes from an idle running (approximately 800 rpm) to a maximum rotational speed (e.g. above 5000 rpm). Thus, an application of classic analytical methods is not possible. the only solution is the transformation of the analysed signals into the "pseudostationary" ones, by taking into account changes in the engine rotational speed. One of the methods applied now a days is resampling (adaptation change of a signal time resolution in a digital form) performed on the basis of information concerning changes in an engine rotational speed. the signal from the sensor of the engine crankshaft location was used for the above application.

Keywords

EN

46.40.-f; 46.80.+j

Discipline

• 46.40.-f: Vibrations and mechanical waves(see also 43.40.+s Structural acoustics and vibration; 62.30.+d Mechanical and elastic waves; vibrations in mechanical properties of solids)
• 46.80.+j: Measurement methods and techniques in continuum mechanics of solids(for mechanical instruments, equipment, and techniques, see 07.10.-h in instruments)

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2010
• Volume: 118
• Issue: 1
• Pages: 49-53

Dates

published

2010-07

Contributors

author

J. Dziurdź

• Faculty of Automotive and Construction Machinery Engineering, Warsaw University of Technology, Narbutta 84 02-524 Warsaw, Poland

References

• 1. J.S. Bendat, A.G. Piersol, Random data: Analysis and measurement procedures, 2nd ed., John Wiley, New York 1986
• 2. F. Bonnardot, M. ElBadaoui, R.B. Randall, J. Daniere, F. Guillet, Mechanical Systems and Signal Processing 19, 766 (2005)
• 3. E. Ramsden, Hall-Effect Sensors: Theory and Application, 2nd Ed., Newnes, an imprint of Elsevier
• 4. C. de Boor, Spline Toolbox for use with MATLAB User's Guide, Version 3.1.1, The Mathworks, Natick (USA) 2002
• 5. R.B. Randall, Frequency Analysis, Brüel&Kjær, Denmark 1987

Identifiers

DOI

10.12693/APhysPolA.118.49