Full-text resources of PSJD and other databases are now available in the new Library of Science.
Visit https://bibliotekanauki.pl

PL EN


Preferences help
enabled [disable] Abstract
Number of results

Journal

2011 | 9 | 4 | 660-669

Article title

Adsorption of nicotinic acid on the surface of nanosized hydroxyapatite and structurally modified hydroxyapatite

Content

Title variants

Languages of publication

EN

Abstracts

EN
In the present paper, hydroxyapatite and structurally modified hydroxyapatite were investigated to establish the best material for nicotinic acid adsorption. Structurally modified hydroxyapatite wa prepared by adding sodium silicate in the reaction medium. The influence of silica concentration, presence of small amounts of metal ions, temperature and initial concentrations of nicotinic acid solutions on the adsorption capacity, were studied. Results indicated that structurally modified hydroxyapatite doped with copper adsorbed the highest amount of nicotinic acid. For this material the adsorption capacity was 0.232 mg nicotinic acid / g material, at an initial concentration of 10−4 M nicotinic acid. For all types of materials, best results were obtained at 15°C. The amount of nicotinic acid adsorbed increases with the decrease in temperature and with the increase in the initial concentration of nicotinic acid. Adsorption kinetics data were modeled using pseudo-first and pseudo-second order models while the interference due to diffusion was analyzed with intraparticle diffusion model. The results indicate that pseudo-second order model best describes the adsorption kinetics data, indicating the formation of chemical bonding.The materials used in this study were characterized by the following methods: IR, Coulter Counter analyzer, Scanning Electron Microscope and BET

Publisher

Journal

Year

Volume

9

Issue

4

Pages

660-669

Physical description

Dates

published
1 - 8 - 2011
online
4 - 6 - 2011

Contributors

  • Department of Chemical Engineering and Oxide Material Science, Faculty of Chemistry and Chemical Engineering, Babes-Bolyai University, Cluj-Napoca, Romania
author
  • Department of Chemical Engineering and Oxide Material Science, Faculty of Chemistry and Chemical Engineering, Babes-Bolyai University, Cluj-Napoca, Romania
  • Department of Physical-Chemistry, Faculty of Chemistry and Chemical Engineering, Babes-Bolyai University, Cluj-Napoca, Romania

References

  • [1] L.L Hench, J. Am. Ceram. Soc. 74, 1487 (1991) http://dx.doi.org/10.1111/j.1151-2916.1991.tb07132.x[Crossref]
  • [2] W. Suchanek, M. Yoshimura, J. Mater. Res. 13, 94 (1998) http://dx.doi.org/10.1557/JMR.1998.0015[Crossref]
  • [3] H. Aoki, Science and medical applications of hydroxyapatite (JAAS, Japan, 1991)
  • [4] D.F. Williams, Adv. Mater. Technol. Monitor. 2, 1 (1994)
  • [5] V.P. Orlovskii, G.E. Sukhanova, Zh.A. Ezhova, G.V. Rodicheva, Zh. Vses. Khim. o-va. im. D.I. Mendeleeva 36, 683 (1991) (In Russian)
  • [6] L.L Hench, Ceramics and Society 101 (1995)
  • [7] Yu.D. Tret’yakov, O.A. Brylev, Ross. Khim. Zh. 7(4), 10 (2000) (In Russian)
  • [8] W. Cao, L.L. Hench, Ceram. Int. 22, 493 (1996) http://dx.doi.org/10.1016/0272-8842(95)00126-3[Crossref]
  • [9] A.J. Monma, J. Ceram. Soc. Jpn, Dent. Res. 8, 97 (1980)
  • [10] M.G.S. Murray, J. Wang, C.B. Ponton, P.M. Marquis, J. Mater. Sci 30, 3061 (1995) http://dx.doi.org/10.1007/BF01209218[Crossref]
  • [11] K Kandori, A. Fudo, T. Ishikawa, Phys. Chem. Chem. Phys 2, 2015, (2000) http://dx.doi.org/10.1039/a909396f[Crossref]
  • [12] A. Tiselius, S. Hjerten, O. Levin, Arch. Biochem. Biophys 65, 132 (1956) http://dx.doi.org/10.1016/0003-9861(56)90183-7[Crossref]
  • [13] T. Kawasaki, K. Ikeda, S. Takahashi, Y. Kuboki, Eur. J. Biochem. 155, 249 (1986) http://dx.doi.org/10.1111/j.1432-1033.1986.tb09483.x[Crossref]
  • [14] T. Kawasaki, W. Kobayashi, K. Ikeda, S. Takahashi, H. Monma, Eur. J. Biochem. 157, 291 (1986) http://dx.doi.org/10.1111/j.1432-1033.1986.tb09667.x[Crossref]
  • [15] K. Tomod, H. Ariizumi, T. Nakaji, T. Makino, Colloid Surface B, 76, 226 (2010) http://dx.doi.org/10.1016/j.colsurfb.2009.10.039[Crossref]
  • [16] C. Xu, D. He, L. Zeng, S. Luo, Colloid Surface B, 73, 360 (2009) http://dx.doi.org/10.1016/j.colsurfb.2009.06.001[Crossref]
  • [17] A.S. Gordon, F.K. Millero, Microb. Ecol. 4, 289 (2005)
  • [18] A.C. Queiroz, J.D. Santos, F.J. Monteiro, I.R. Gibson, J.C. Knowles, Biomaterials 22, 1393 (2001) http://dx.doi.org/10.1016/S0142-9612(00)00296-9[Crossref]
  • [19] B. Palazzo, M.C. Sidoti, N. Roveri et al., Mater. Sci. Eng. C-Biomim. 25, 207 (2005) http://dx.doi.org/10.1016/j.msec.2005.01.011[Crossref]
  • [20] W.Y. Chen, M.S. Lin, P.H. Lin, P.S. Tasi, Y. Chang, S. Yamamota, Colloid Surface A 295, 274 (2007) http://dx.doi.org/10.1016/j.colsurfa.2006.09.013[Crossref]
  • [21] C.N. Mulligan, R.N. Yong, B.F. Gibbs, Eng. Geol. 60, 193 (2001) http://dx.doi.org/10.1016/S0013-7952(00)00101-0[Crossref]
  • [22] D. Marchat, D. Bernache-Assollant, E. Champion, J. Hazard. Mater. 139, 453 (2007) http://dx.doi.org/10.1016/j.jhazmat.2006.02.040[Crossref]
  • [23] T. Suzuki, T. Hatsushika, M. Michihiro, J. Chem. Soc. Faraday Trans. 1, 3605 (1982) [Crossref]
  • [24] M. Peld, K. Tonsuaadu, V. Bender, Environ. Sci. Technol. 38, 5626 (2004) http://dx.doi.org/10.1021/es049831l[Crossref]
  • [25] A. Corami, S. Mignardi, V. Ferrini, J. Hazard. Mater. 146, 164 (2007) http://dx.doi.org/10.1016/j.jhazmat.2006.12.003[Crossref]
  • [26] A. Yasukawa, T. Yokoyama, K. Kandori, T. Ishikawa, Colloid Surface A 299, 203 (2007) http://dx.doi.org/10.1016/j.colsurfa.2006.11.042[Crossref]
  • [27] R.E. Sheha, J. Colloid Interf. Sci. 310, 18 (2007) http://dx.doi.org/10.1016/j.jcis.2007.01.047[Crossref]
  • [28] Y. Xu, F.W. Schwartz, S.J. Traina, Environ. Sci. Technol. 28, 1472 (1994) http://dx.doi.org/10.1021/es00057a015[Crossref]
  • [29] J.A. Gomez del Rio, P.J. Morando, D.S. Cicerone, J. Environ. Manage 71, 169 (2004) http://dx.doi.org/10.1016/j.jenvman.2004.02.004[Crossref]
  • [30] A.G. Leyva, J. Marrero, P. Smichowski, D. Cicerone, Environ. Sci. Technol. 35, 3669 (2001) http://dx.doi.org/10.1021/es0009929[Crossref]
  • [31] J. Jeanjean, V. Vincent, M. Fedoroff, J. Solid State Chem. 108, 68 (1994) http://dx.doi.org/10.1006/jssc.1994.1010[Crossref]
  • [32] Q.Y Ma, T.J. Logan, S.J. Traina, J.A. Ryan, Environ. Sci. Technol. 28, 1219 (1994) http://dx.doi.org/10.1021/es00056a007[Crossref]
  • [33] I. Smiciklas, A. Onjia, S. Raicevic, D. Janackovic, M. Mitric, J. Hazard. Mater. 152, 876 (2008) http://dx.doi.org/10.1016/j.jhazmat.2007.07.056[Crossref]
  • [34] B.V. Somayaji, U. Jariwala, P. Jayachandran, K. Vidyalakshmi, R.V. Dudhani, J. Periodontol. 69, 409 (1998) [Crossref]
  • [35] W.A. Soskolne, P.A. Heasman, J. Periodontol. 68, 32 (1997) [Crossref]
  • [36] D. Steinberg, M. Friedman, A. Soskolne, M.N. Sela, J. Periodontol. 61, 393 (1990) [Crossref]
  • [37] K. Stoltze, J. Clin. Periodontol. 19, 698 (1992) http://dx.doi.org/10.1111/j.1600-051X.1992.tb02531.x[Crossref]
  • [38] P.S. Gomes, J.D. Santos, M.H. Fernandes, Acta Biomaterialia 4, 630 (2008) http://dx.doi.org/10.1016/j.actbio.2007.12.006[Crossref]
  • [39] S. Lepretre, F. Chai, J.C. Hornez, G. Vermet, C. Neut, M. Descamps, H.F. Hildebraud, B. Martel, Biomaterials 30, 6086 (2009) http://dx.doi.org/10.1016/j.biomaterials.2009.07.045[Crossref]
  • [40] Q. Xu, Y. Tanaka, J.T. Czernuszka, Biomaterials 28, 2687 (2007) http://dx.doi.org/10.1016/j.biomaterials.2007.02.007[Crossref]
  • [41] E. Ojewole, I. Mackraj, P. Naidoo, T. Govender, Eur. J. Pharm. Biopharm. 70, 697 (2008) http://dx.doi.org/10.1016/j.ejpb.2008.06.020[Crossref]
  • [42] R. Altschul, A. Hoffer, J.D. Stephen, Arch. Biochem. 54, 558 (1955) http://dx.doi.org/10.1016/0003-9861(55)90070-9[Crossref]
  • [43] C.D. Meyers, V.S. Kamanna, M.L. Kashyap, Curr. Opin. Lipidol. 15, 659 (2004) http://dx.doi.org/10.1097/00041433-200412000-00006[Crossref]
  • [44] P.L. Canner, K.G. Berge, N.K. Wenger, et al., J. Am. Coll. Cardiol. 8, 1245 (1986) http://dx.doi.org/10.1016/S0735-1097(86)80293-5[Crossref]
  • [45] R.H. Stern, J.D. Spence, D.J. Freeman, A. Parbtani, Clin. Pharmacol. Ther. 50, 66 (1991) http://dx.doi.org/10.1038/clpt.1991.104[Crossref]
  • [46] J.D. Morrow, J.A. Awad, J.A. Oates, L.J. Roberts, J. Invest. Dermotol. 98, 812 (1992) http://dx.doi.org/10.1111/1523-1747.ep12499963[Crossref]
  • [47] J.D. Morrow, W.G. Parsons, L.J. Roberts, Prostaglandins 38, 263 (1989) http://dx.doi.org/10.1016/0090-6980(89)90088-9[Crossref]
  • [48] I.R. Gibson, S.M. Best, W. Bonfield, J. Biomed. Mater. Res. 44, 422 (1999) http://dx.doi.org/10.1002/(SICI)1097-4636(19990315)44:4<422::AID-JBM8>3.0.CO;2-#[Crossref]
  • [49] P.J Launer, In: R. Anderson, B. Arkles, G.L. Larson (Eds.), Infrared analysis of organosilicon compounds: Spectra-structure correlations. Silicon compounds, register and Review, 4th edition (P.A, Petrarch Systems, Bristol, 1987)
  • [50] E. Bogya, R. Barabas, A. Csavdari, V. Dejeu, I. Baldea, Chem. Pap. 63, 568 (2009) http://dx.doi.org/10.2478/s11696-009-0059-x[Crossref]
  • [51] S. Lagergren, Kungliga Svenska Vetenskapsakademiens, Handlingar 24, 1 (1898)
  • [52] F.C. Wu, R.L. Tseng, R.S. Juang, Water Res. 35, 613 (2001) http://dx.doi.org/10.1016/S0043-1354(00)00307-9[Crossref]
  • [53] P. Antonio, K. Iha, M.E.V. Suarez-Iha, J. Colloid Interf. Sci. 307, 24 (2007) http://dx.doi.org/10.1016/j.jcis.2006.11.031[Crossref]
  • [54] Y.S. Ho, G. McKay, Process Biochem. 34, 451 (1999) http://dx.doi.org/10.1016/S0032-9592(98)00112-5[Crossref]
  • [55] Y.S. Ho, Pol. J. Environ. Stud. 1, 81 (2006)

Document Type

Publication order reference

Identifiers

YADDA identifier

bwmeta1.element.-psjd-doi-10_2478_s11532-011-0057-z
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.