Search results

1

Influence of Milling Time on Formation of NiTi Alloy Produced by High-Energy Ball Milling

100%

Salwa P., Goryczka T., Salwa P., Goryczka T.

Archives of Metallurgy and Materials

|

2019

|

vol. 64

|

issue 4

2

Structure of CaPs Coatings Electrophoretically Deposited on NiTi Shape Memory Alloy

89%

Dudek K., Goryczka T.

Acta Physica Polonica A

|

2016

|

vol. 130

|

issue 4

1053-1055

EN

The surface of NiTi shape memory alloys applied as long-term implants has been modified by protective calcium phosphates (CaPs) coatings, with the objective of improving the biocompatibility of this material. The calcium phosphates such as hydroxyapatite Ca₅(PO₃)OH (HAP) and β-tricalcium phosphate β-Ca₃(PO₄)₂ (β-TCP) were deposited by electrophoretic deposition. In order to improve the adhesion, the deposited samples were vacuum-sintered at wide range of temperature from 500°C to 1000°C for 2 h. The studies revealed that applied sintering conditions did not change the structure of CaPs. The coatings consisted of HAP with hexagonal structure (P63/m) and β-TCP with rhombohedral structure (R-3c). Changes in lattice parameters for CaPs coatings after deposition and sintering were refined by the Rietveld method.

3

Influence of Milling Time on Formation of NiTi Alloy Produced by High-Energy Ball Milling

89%

Salwa P., Goryczka T.

Archives of Metallurgy and Materials

|

2019

|

vol. 64

|

issue 3

4

Structure of Chitosan-ZnO Layers Electrophoretically Deposited on NiTi Shape Memory Alloy

72%

Goryczka T., Kokoszka A., Kowalski P., Łosiewicz B.

Acta Physica Polonica A

|

2016

|

vol. 130

|

issue 4

1056-1058

EN

The surface of NiTi shape memory was modified by deposition of chitosan-ZnO thin film. The electrodeposition process was carried out at room temperature at voltage-time conditions: 10 V/30 s, 10 V/300 s, 20 V/30 s, or 20 V/300 s. Structure of the obtained coatings was studied by means of grazing incidence beam X-ray diffraction. Distribution of the zinc oxide particles in the chitosan matrix was observed with use of scanning electron microscopy. It was found that depending on the electrodeposition parameters, the structure of the obtained chitosan-ZnO coatings varies from amorphous to coarse-grained.

5

Martensite Reorientation after Thermal Cycling in NiTiCu Shape Memory Alloys Studied by EBSD Technique

72%

Rak J., Goryczka T., Ochin P.

Acta Physica Polonica A

|

2016

|

vol. 130

|

issue 4

1075-1078

EN

The Ni₂₅Ti₅₀Cu₂₅ shape memory alloy exhibits one-step martensitic transformation. Transformation occurs between the B2 parent phase and the B19 orthorhombic martensite. The course of the martensitic transformation was in situ studied in the alloy with use of electron backscatter diffraction. During heating, reverse martensitic transformation occurs from the B19 orthorhombic martensite to the B2 parent phase. On cooling, from the parent phase the B19 martensite is formed. Obtained results proved that the B19 martensitic plates forms the variants indexed as 1, 3, and 5. Thermal cycling does not change the crystallographic correlation between the parent phase and the martensite. However, after cycling, different rearrangement of the martensitic plates can be received. In consequence, characteristic temperatures of the martensitic transformation are shifted.

6

Structure Of TiN/Hydroxyapatite Multilayers Deposited On Surface Of NiTi Shape Memory Alloy

72%

Wierzchoń T., Goryczka T., Dudek K., Lelątko J.

Archives of Metallurgy and Materials

|

2015

|

issue 3

7

Structure of the Extruded and Thermally Treated Ni_{54.3}Fe_{16.2}Ga_{29.5} Alloy

72%

Prusik K., Matyja E., Zubko M., Goryczka T.

Acta Physica Polonica A

|

2016

|

vol. 130

|

issue 4

1020-1022

EN

Hot extrusion process was applied to Ni_{54.3}Fe_{16.2}Ga_{29.5} polycrystalline alloy. Then the rod was annealed subsequently for 1 h at 700, 800, 900, and 1100°C. In this paper the effect of annealing on the microstructure of the polycrystalline extruded Ni-Fe-Ga alloy were analyzed. The structure of the alloys was determined by the X-ray and transmission electron microscopy. The electron backscattering diffraction technique was applied to obtain the texture of the extruded rods after heat treatment.

8

PZT-Type Ceramics Doped with Manganese, Antimony, Lanthanum and Tungsten – Technology and Physical Properties

64%

Bochenek D., Niemiec P., Ćwikiel E., Goryczka T., Bochenek D., Niemiec P., Ćwikiel E., Goryczka T.

Archives of Metallurgy and Materials

|

2020

|

vol. 65

|

issue 2

9

The Technology and Structural Properties of Special Glass Modified (Ba0.6Pb0.4)TiO3 Ceramics

55%

Dzik J., Bochenek D., Kozielski L., Wodecka-Duś B., Adamczyk M., Goryczka T., Radoszewska D.

Archives of Metallurgy and Materials

|

2016

|

issue 4

10

Technology and Electrophysical Properties of the (K0.44Na0.52Li0.04) NbO3 Ceramics Doped by Cr3+, Zn2+, Sb3+ or Fe3+

55%

Bochenek D., Osińska K., Niemiec P., Adamczyk M., Goryczka T., Szych R.

Archives of Metallurgy and Materials

|

2018

|

vol. 63

|

issue 3

11

Influence of Sr2+ Dopant on Microstructure and Electric Properties of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 (BCZT) Ceramics

55%

Radoszewska D., Goryczka T., Adamczyk M., Wodecka-Duś B., Bochenek D., Kozielski L.

Archives of Metallurgy and Materials

|

2018

|

vol. 63

|

issue 3

12

The Mössbauer Spectroscopy and Analytical Investigations οf the Polycrystalline Compounds with General Formula Zn_xSn_yCr_zSe_4

55%

Jendrzejewska I., Hanc A., Zajdel P., Kita A., Goryczka T., Maciążek E., Mrzigod J.

Acta Physica Polonica A

|

2008

|

vol. 114

|

issue 6

1591-1597

EN

We present combined X-ray powder diffraction and Mössbauer ^{119}Sn studies of polycrystalline compounds with a general formula Zn_xSn_yCr_zSe_4 (where x+y+z ≈3). The obtained single-phase compounds crystallize in the spinel cubic structure - Fd3m. Tin ions are found to occupy both tetrahedral and octahedral sublattices. On the contrary to the strong tetrahedral site preference energy of Sn, the presented data strongly suggest that the increase in lattice parameters with Sn doping is caused by Sn ions that incorporated into octahedral positions. A quadrupole and isomer shifts of ^{119}Sn in (SnSe_4)^{6-} and (SnSe_6)^{4-} are also reported.

13

Deposition of Chitosan Layers on NiTi Shape Memory Alloy

54%

Goryczka T., Kowalski P., Łosiewicz B.

Archives of Metallurgy and Materials

|

2015

|

issue 1

14

Influence of Calcium Ions on the Structure and Properties of LaMnO3

52%

Bara M., Dzik J., Feliksik K., Kozielski L., Wodecka-Duś B., Goryczka T., Zarycka A., Adamczyk-Habrajska M., Bara M., Dzik J., Feliksik K., Kozielski L., Wodecka-Duś B., Goryczka T., Zarycka A., Adamczyk-Habrajska M.

Archives of Metallurgy and Materials

|

2020

|

vol. 65

|

issue 3

15

Influence of Lanthanum Dopant on the Structure and Electric Properties of BaBi2Nb2O9 Ceramics

52%

Adamczyk-Habrajska M., Goryczka T., Szalbot D., Dzik J., Rerak M., Bochenek D., Adamczyk-Habrajska M., Goryczka T., Szalbot D., Dzik J., Rerak M., Bochenek D.

Archives of Metallurgy and Materials

|

2020

|

vol. 65

|

issue 1

Refine search results

Influence of Milling Time on Formation of NiTi Alloy Produced by High-Energy Ball Milling

Structure of CaPs Coatings Electrophoretically Deposited on NiTi Shape Memory Alloy

Influence of Milling Time on Formation of NiTi Alloy Produced by High-Energy Ball Milling

Structure of Chitosan-ZnO Layers Electrophoretically Deposited on NiTi Shape Memory Alloy

Martensite Reorientation after Thermal Cycling in NiTiCu Shape Memory Alloys Studied by EBSD Technique

Structure Of TiN/Hydroxyapatite Multilayers Deposited On Surface Of NiTi Shape Memory Alloy

Structure of the Extruded and Thermally Treated Ni_{54.3}Fe_{16.2}Ga_{29.5} Alloy

PZT-Type Ceramics Doped with Manganese, Antimony, Lanthanum and Tungsten – Technology and Physical Properties

The Technology and Structural Properties of Special Glass Modified (Ba0.6Pb0.4)TiO3 Ceramics

Technology and Electrophysical Properties of the (K0.44Na0.52Li0.04) NbO3 Ceramics Doped by Cr3+, Zn2+, Sb3+ or Fe3+

Influence of Sr2+ Dopant on Microstructure and Electric Properties of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 (BCZT) Ceramics

The Mössbauer Spectroscopy and Analytical Investigations οf the Polycrystalline Compounds with General Formula Zn_xSn_yCr_zSe_4

Deposition of Chitosan Layers on NiTi Shape Memory Alloy

Influence of Calcium Ions on the Structure and Properties of LaMnO3

Influence of Lanthanum Dopant on the Structure and Electric Properties of BaBi2Nb2O9 Ceramics