Wide use of bisphenol A (BPA) in production of polycarbonates and plastic food packaging cause increase of concentration of BPA in the environment. Both in surface water, underground water and seawater BPA was frequently detected in different concentrations. Emerging problem is adsorption of BPA on sewage, because it could be considered as an additional source of pollution, if it is used as a fertilizer in agricultural sectors. Absorbed BPA on sewage sludge stays persistent in the environment and generates adverse biological effects in endocrine system. Because of ecological safety, exploration of potential techniques to remove BPA to the level, which does not give adverse effect on natural environment is necessary. In this study the adsorption of BPA from simulated water onto commercial activated carbons was investigated. On the basis of experimental data the kinetics and type of sorption were determined.
PL
Masowe wykorzystywanie bisfenolu A (BPA) do produkcji tworzyw sztucznych i opakowań na żywność powoduje wzrost stężenia tego związku w środowisku. Zarówno wody powierzchniowe, podziemne, jak i morskie ulegają coraz większemu skażeniu bisfenolem A. Niepokojący jest fakt, że BPA obecny w ściekach w znacznym stopniu ulega sorpcji na kłaczkach osadu czynnego, co wskazuje na dodatkowe źródło zanieczyszczenia środowiska tym związkiem. Zasorbowany na osadzie bisfenol A trwale pozostaje w środowisku, wywołując niekorzystne efekty biologiczne głównie o charakterze hormonalnym. Zagrożenie, jakie stanowi ten związek, powoduje konieczność poszukiwania efektywnych metod jego usuwania. W pracy określono możliwość usuwania BPA z roztworów wodnych na krajowych i zagranicznych węglach aktywnych. Na podstawie danych doświadczalnych wyznaczono kinetykę i typ procesu sorpcji.
The paper deals with removing phenols and cyanides from industrial waste waters, as a result of their biological degradation by means of ultrafiltration membranes with immobilized enzymes coming from bacterial strain Pseudomonas sp. The enzymatic membranes were obtained by ultrafiltration of protein solution trough a membrane made of polyacrylonitrile. Is this way,above 90 percent of the enzymes were adsorbed onto the membrane surface. Such enzymatic membranes were decomposed phenol and potassium cyanide in 70 and 80 percent respectively, during single ultrafiltration at the pressure of 100000 Pa and at two fold reduction of initial volume of waste waters. The retention coefficient of ultrafiltration process amounted to 100 percent for phenol and was above 90 percent for potassium cyanide.
The article presents the results of determining the most appropriate conditions of microwave sludge pre-treatment (500-1200 W), prior to its anaerobic digestion in a continuous mode. The assessment of the pre-treatment conditions (microwave power, sludge temperature after pre-treatment) was based on: the release of organic (COD, protein) and inorganic (NH4+, PO43-) substances into liquid, the quantity of methane produced, sludge higienisation and the susceptibility of the pre-treated sludge to dewatering. The power of the microwaves applied did not play significant role on the pre-treatment effectiveness. Taking into account the fact that sludge pre-treatment by microwave irradiation requires the delivery of energy, the pre-treatment by microwaves of higher power (1200 W) and resulting in sludge temperature of 70°C was recommended for further experiments. Sludge pre-treatment by means of microwave irradiation as a pre-treatment step influenced the effectiveness of the subsequent anaerobic digestion, conducted in continuous conditions, in a positive way. The largest amount of biogas was obtained for HRT in the range of 15-20 days. As compared to the sludge which did not undergo pre-treatment, daily biogas production and biogas yield increased by 18-41% and 13-35% respectively. The combination of microwave pre-treatment and mesophilic anaerobic digestion ensured the elimination of pathogens (Salmonella spp., Escherichia coli).
PL
Celem badań przedstawionych w artykule było wyznaczenie najkorzystniejszych warunków prowadzenia procesu dezintegracji mikrofalowej (500-1200 W) osadów ściekowych przed ich przeróbką w warunkach beztlenowych (warunki ciągłe). Oceny efektywności procesu mikrofalowej dezintegracji osadów (moc mikrofal, temperatura) dokonano, kierując się stężeniem związków organicznych (ChZT, białka rozpuszczalne) uwolnionych do cieczy nadosadowych, wskaźnikami jakościowymi produkowanego biogazu, stopniem higienizacji oraz podatnością osadów przefermentowanych na odwadnianie. Na podstawie przeprowadzonych badań ustalono, iż moc zastosowanego promieniowania mikrofalowego nie wpłynęła w znaczący sposób na efektywność procesu dezintegracji. Biorąc pod uwagę efektywność oraz zapotrzebowanie energetyczne, ustalono, iż najkorzystniejsze warunki prowadzenia procesu dezintegracji mikrofalowej zapewnia zastosowanie mikrofal o mocy 1200 W oraz temperatury osadów wynoszącej 70°C. Dezintegracja mikrofalowa osadów ściekowych za pomocą promieniowania mikrofalowego wpłynęła korzystnie na efektywność procesu fermentacji metanowej prowadzonego w warunkach ciągłych. Najkorzystniejsze wskaźniki produkowanego biogazu uzyskano dla HRT wynoszącego 15-20 dni. W tych warunkach dobowa i jednostkowa produkcja biogazu wzrosły odpowiednio o 18-41% oraz 13-35%. Zastosowanie dezintegracji mikrofalowej przed procesem mezofilowej fermentacji zapewniło całkowitą eliminację mikroorganizmów patogennych (Salmonella spp., Escherichia coli).
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.