Search results

1

Define the Type of Tribological Wear of High Speed Steel Remelted with the Electric Arc with the Usage of the Confocal Microscope

100%

Dziedzic A.

Archives of Foundry Engineering

|

2012

|

issue 2

2

Modern micropassives: fabrication and electrical properties

100%

Dziedzic A.

|

2006

|

vol. 54

|

issue 1

3

Volume Density and Longitudinal Wave Velocity Changes of the Ciężkowice and Krosno Flysch Sandstones Under High Pressure and Temperature in the Triaxial Test Condition

72%

Pinińska J., Dziedzic A., Pinińska J., Dziedzic A.

Archives of Civil Engineering

|

2011

|

issue 1

4

Noise properties of thin-film Ni-P resistors embedded in printed circuit boards

51%

Stadler A. W., Dziedzic A., Zawiślak Z., Stęplewski W.

|

2013

|

issue 3

5

Impact of Hardening Methods on the Moulding Sand’s Properties with Gypsum Binder

46%

Granat K., Paduchowicz P., Dziedzic A., Jamka M., Biały P., Granat K., Paduchowicz P., Dziedzic A., Jamka M., Biały P.

Archives of Foundry Engineering

|

2020

|

vol. 20

|

issue 4

6

The Quality of Welded Connections Elements from the Steel 30HGS and Titanium Alloy Ti6Al4V

45%

Łapiński Z., Dziedzic A., Bochnowski W., Adamiak S., Sandomierski S.

Archives of Foundry Engineering

|

2012

|

issue 2

7

Characterization Of Oxide Layers Produced On The AISI 321 Stainless Steel After Annealing

39%

Bochnowski W., Cebulski J., Dziedzic A., Adamiak S., Berchenko M., Trzyna M.

Archives of Metallurgy and Materials

|

2015

|

issue 3

8

Deterioration of Mechanical Properties of MBE-Grown, Metastable Semiconductor Layer with Time: the Case of Zinc Blende MnTe

33%

Adamiak S., Dynowska E., Dziedzic A., Szmuc K., Janik E., Wiater M., Wojtowicz T., Szuszkiewicz W.

|

EN

Several few μm thick (001)-oriented, metastable MnTe layers with the zinc blende structure grown onto (001)GaAs substrate by MBE during different periods for the last twenty years were investigated by the scanning electron microscopy, atomic force microscopy, X-ray diffraction, and nanoindentation methods. A partial decomposition of the oldest investigated layers was demonstrated. An important decrease of Young's modulus from about 34 GPa to about 17 GPa, resulting from a deterioration of the crystal structure of such layers, was found.

Refine search results

Define the Type of Tribological Wear of High Speed Steel Remelted with the Electric Arc with the Usage of the Confocal Microscope

Modern micropassives: fabrication and electrical properties

Volume Density and Longitudinal Wave Velocity Changes of the Ciężkowice and Krosno Flysch Sandstones Under High Pressure and Temperature in the Triaxial Test Condition

Noise properties of thin-film Ni-P resistors embedded in printed circuit boards

Impact of Hardening Methods on the Moulding Sand’s Properties with Gypsum Binder

The Quality of Welded Connections Elements from the Steel 30HGS and Titanium Alloy Ti6Al4V

Characterization Of Oxide Layers Produced On The AISI 321 Stainless Steel After Annealing

Deterioration of Mechanical Properties of MBE-Grown, Metastable Semiconductor Layer with Time: the Case of Zinc Blende MnTe