Position Control of a Turret Using LabVIEW

• Authors: A. Saygin , A. Rashid
• Languages of publication: EN

Abstracts

EN

Servo motors are commonly used for axial motion control of gun turrets. In this study, horizontal and vertical position control around two axes of motion of a gun turret was realized using LabVIEW software. Communication with Siemens s7-300 CPU315-2 PN/DP PLC has been realized using KEPServerEX software and using OPC tools in LabVIEW. KEPServerEX software was used to transfer motor control and status data between the PC and PLC. PLC was used to control the AC servo drivers using ProfiBUS protocol, in accordance with commands sent from LabVIEW. Servo motors with connected S110 CU305DP servo drivers have been controlled according to control data received from the PLC. Scout software was used for uploading communication and position commands and for changing factory defaults of AC servo drivers. Furthermore, status control and input of commands have been realized using a touch panel. All PLC and touch panel programming have been performed on TIAPortal V13SP1. Thus, the position control of gun turret has been provided using both, PC and the touch panel.

Keywords

EN

06.60.Sx; 07.07.Tw

Discipline

• 07.07.Tw: Servo and control equipment; robots
• 06.60.Sx: Positioning and alignment; manipulating, remote handling

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2017
• Volume: 132
• Issue: 3
• Pages: 970-973

Dates

published

2017-09

Contributors

author

A. Saygin

• Gazi University, Faculty of Technology Department Electrical and Electronics Engineering, Ankara, Turkey

author

A. Rashid

• Gazi University, Graduate School of Natural and Applied Science, Ankara, Turkey

References

• [1] Z.B.J. Gonzalo, H.C.J. Aurelio, S.G.S. Ignacio, in: 2014 XIX Symp. Image, Signal Processing and Artificial Vision, 2014, p. 1, doi: 10.1109/STSIVA.2014.7010186
• [2] L. Zhou, J. Chen, L. Xu, in: 2008 Int. Sem. Future BioMedical Information Engineering, 2008, p. 318, doi: 10.1109/FBIE.2008.94
• [3] L. Schiop, M. Gaiceanu, in: 2010 3rd Int. Symp. Electrical and Electronics Engineering (ISEEE), 2010, p. 165, doi: 10.1109/ISEEE.2010.5628522
• [4] B. Yan, Z. Hongwei, in: 2012 World Automation Congress (WAC), 2012, p. 1
• [5] H. Fang, W. Tang, in: 2012 2nd Int. Conf. Consumer Electronics, Communications and Networks (CECNet), 2012, p. 2795, doi: 10.1109/CECNet.2012.6202004
• [6] T.O. Putri, Rahmadwati, B. Siswojo, in: Electrical Power, Electronics, Communications, Controls and Informatics Seminar (EECCIS-2014), 2014, p. 99, doi: 10.1109/EECCIS.2014.7003727
• [7] O.M. Pişirir, O. Bingöl, Acta Phys. Pol. A 130, 36 (2016), doi: 10.12693/APhysPolA.130.36
• [8] M. Imal, Acta. Phys. Pol. A 130, 245 (2016), doi: 10.12693/APhysPolA.130.245
• [9] A. Aksoz, A. Saygin, Int. J. Electrical, Electronics Data Commun. 3, 19 (2015)
• [10] Y. Debbağ, E.N. Yilmaz, in: 2015 3rd Int. Istanbul Smart Grid Congress and Fair (ICSG), 2015, p. 1, doi: 10.1109/SGCF.2015.7354935
• [11] M. Dindar, S. Dindar, E. Kandemir, C. Bayar, S. Helhel, T. Ozisik, Acta Phys. Pol. A 128, B-73 (2015), doi: 10.12693/APhysPolA.128.B-73
• [12] Kepserver, 2016, [online], available: http://www.kepware.com/products/kepserverex/
• [13] Labview, 2016, [online], available: http://www.ni.com/labview/

Identifiers

DOI

10.12693/APhysPolA.132.970