PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 66 | 97-108
Article title

Structural Failure of Buildings: Issues and Challenges

Content
Title variants
Languages of publication
EN
Abstracts
EN
This paper discusses a list of information and issues that causes of structural failure of buildings. Structural failure begins to occur when the material is stressed to its upper strength limit causing to rupture or extreme deformations. The ultimate strength of the material or the system is the limit of the load bearing capacity. On reaching this limit, the construction materials could already been damaged, and their load carrying capacity is suddenly decreased permanently. If the system is properly designed, a local collapse should normally not be a cause of instant or gradual failure of the complete building. The ultimate failure strength of the construction elements should be carefully considered in the design of structures to prevent failure.
Discipline
Year
Volume
66
Pages
97-108
Physical description
Contributors
References
  • [1] Brackbill, R. M., Thorpe, L. E., Di Grande, L., Perrin, M., Sapp 2nd, J. H., Wu, D., ... & Thalji, L. (2006). Surveillance for World Trade Center disaster health effects among survivors of collapsed and damaged buildings. Morbidity and mortality weekly report. Surveillance summaries (Washington, DC: 2002), 55(2), 1-18.
  • [2] Turker, M., & San, B. T. (2004). Detection of collapsed buildings caused by the 1999 Izmit, Turkey earthquake through digital analysis of post-event aerial photographs. International Journal of Remote Sensing, 25(21), 4701-4714.
  • [3] Schweier, C., & Markus, M. (2006). Classification of collapsed buildings for fast damage and loss assessment. Bulletin of earthquake engineering, 4(2), 177-192.
  • [4] Murakami, H. O. (1992). A simulation model to estimate human loss for occupants of collapsed buildings in an earthquake. In Proceedings of the Tenth World Conference on Earthquake Engineering (Vol. 10, pp. 5969-76).
  • [5] Guo, H., Zhang, B., Lei, L., Zhang, L., & Chen, Y. (2010). Spatial distribution and inducement of collapsed buildings in Yushu earthquake based on remote sensing analysis. Science China Earth Sciences, 53(6), 794-796.
  • [6] Cermak, J. E. (1999, December). Wind tunnel studies of buildings and structures. American Society of Civil Engineers.
  • [7] Ellingwood, B. (1980). Development of a probability based load criterion for American National Standard A58: Building code requirements for minimum design loads in buildings and other structures (Vol. 13). US Department of Commerce, National Bureau
  • [8] Dyrbye, C., & Hansen, S. O. (1996). Wind loads on structures. Chichester: John Wiley & Sons.
  • [9] Brown, Kenneth S. "Buildings." Buildings. Springer New York, 1989. 76-98.
  • [10] Skempton, A. W., & MacDonald, D. H. (1956). The allowable settlements of buildings. Proceedings of the Institution of Civil Engineers, 5(6), 727-768.
  • [11] Brand, S. (1995). How buildings learn: What happens after they're built. Penguin.
  • [12] Clark, K. (2001). Informed Conservation: Understanding historic buildings and their landscapes for conservation. English Heritage.
Document Type
article
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.psjd-e29164d6-a77c-4cea-ae80-fb2e15bd1ea9
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.