Preferences help
enabled [disable] Abstract
Number of results
2019 | 129 | 23-39
Article title

Preparation and performance evaluation of jute and glass composites of epoxy resin of (2E,6E)-2,6-bis (4-hydroxy benzylidene)-4-methylcyclohexanone

Title variants
Languages of publication
Jute and glass composites were prepared by compressing molding technique at 150C for 3h under 20 MPa pressure. J-EMBHBC-DDS, J-EMBHBC-THPA, G-EMBHBC-DDS and G-EMBHBC-THPA showed 15, 15.1, 58.3 and 18.7 MPa tensile strength, respectively. J-EMBHBC-DDS and J-EMBHBC-THPA showed 22.9 and 19.4 MPa flexural strength, respectively. J-EMBHBC-DDM and G-EMBHBC-DDM showed 1.6×109 and 1.2×1012 ohm cm volume resistivity, respectively. J-EMBHBC-DDM and G-EMBHBC-DDM showed 2.8 and 11.2 kVmm-1, respectively. Water uptake in the composites was carried out in pure water and 10% each of aqueous HCl, H2SO4, HNO3, NaOH, KOH and NaCl solutions at 35 C as well as in boiling water. Composites showed high water uptake tendency and longer equilibrium time in different environments. High water uptake in the composites is due to presence of hydroxyl groups in celluloses and resins and also due to formation of micro cracks. Nature of the electrolytes also played an important role on water uptake behavior and diffusivity in the composites. Drastic reduction in equilibrium water uptake time was observed in boiling water.
Physical description
  • Department of Chemistry, Saurashtra University, Rajkot - 360 005, Gujarat, India
  • Department of Chemistry, Saurashtra University, Rajkot - 360 005, Gujarat, India
  • Department of Chemistry, Saurashtra University, Rajkot - 360 005, Gujarat, India
  • Department of Chemistry, Saurashtra University, Rajkot - 360 005, Gujarat, India
  • [1] Shiqiang Deng, Luke Djukic, Rowan Paton, Lin Ye, Thermoplastic–epoxy interactions and their potential applications in joining composite structures – A review. Composites: Part A 68 (2015) 121-132
  • [2] Cristina Acebo, Xavier Ramis, Angels Serra, Improved epoxy thermosets by the use of poly(ethyleneimine) derivatives. Phys. Sci. Rev. 2(8) (2017) 20160128-1-20160128-34.
  • [3] J. L. Ferracane. Resin composite - state of the art. Dental Materials 27 (2011) 29-38
  • [4] M. Alexandre and P. Dubois. Polymer-layered silicate nano composites: preparation, properties and uses of a new class of materials. Mater. Sci. Eng: R: Reports. 28 (2000) 1-63
  • [5] I. Hackman, and L. Hollaway, Epoxy-layered silicate nanocomposites in civil engineering. Composites Part A 37(8) (2006) 1161-1170
  • [6] Dumas L, Bonnaud L, Olivier M, Poorteman M, Dubois P, Multiscale benzoxazine composites: The role of pristine CNTs as efficient reinforcing agents for high-performance applications. Composites Part B: Engineering 112 (2017) 57-65
  • [7] Guolong Wanga, Demei Yua, Ajit D. Kelkarb, Lifeng Zhangb, Electrospun nanofiber: Emerging reinforcing filler in polymer matrix composite materials. Progress in Polym. Sci. 75 (2017) 73-107
  • [8] Zabihi O, Ahmadi M, Nikafshar S, Chandrakumar Preyeswary K, Naebe M, A technical review on epoxy-clay nanocomposites: Structure, properties, and their applications in fiber reinforced composites. Composites Part B: Engineering 135 (2018) 1-24
  • [9] Pooja P. Adroja, R.Y. Ghumara and P. H. Parsania, Physico-chemical study of chalcone moiety containing epoxy resin and its fiber reinforced composites. Designed Monomers and Polymers, 16( 6) (2013) 503-508
  • [10] S. Dinesh, C. Elanchezhian, B. Vijayaramnath, R. Ramadhass, Experimental investigation of composite materials for marine applications - A review. Int. J. Engg. Sci. and Mathe. 7(4) 2018 506-544 (special issue NCIME)
  • [11] Bin Yang, Meiyun Zhang, Zhaoqing Lu, JingJing Luo, Shunxi Song, and Qiuyu Zhang, From poly(p-phenylene terephthalamide) broken paper: high-performance aramid nanofibers and their application in electrical insulating nanomaterials with enhanced properties, ACS Sustainable Chemistry & Engineering 6 (7) (2018) 8954-8963
  • [12] B. Ramezanzadeha, S. Niroumandradb, A. Ahmadib, M. Mahdaviana, M. H. Mohamadzadeh Moghadam. Enhancement of barrier and corrosion protection performance of an epoxy coating through wet transfer of amino functionalized grapheneoxide. Corro. Sci. 103 (2016) 283-304
  • [13] Sufang Chen, Zejun Xu, Daohong Zhang, Synthesis and application of epoxy ended hyperbranched polymers. Chem. Engg. J. 343 (2018) 283-302
  • [14] X. Ren, S. Peng, W. Zhang, C. Yi, Y. Fang and D. Hui, Preparation of adipic acidpolyoxypropylene diamine copolymer and its application for toughening epoxy resins. Composites Part B: Engineering 119 (2017) 32-40
  • [15] Ayesha Kausar, Irum Rafique, Zanib Anwar and Bakhtiar Muhammad, Perspectives of epoxy/graphene oxide composite: significant features and technical applications, Polym. Plas. Technol. and Engg. 55(7) (2017) 704-722
  • [16] Jignesh P. Patel and Parsotam H. Parsania. Fabrication and comparative mechanical, electrical and water absorption characteristic properties of multifunctional epoxy resin of bisphenol-C and commercial epoxy-treated and -untreated jute fiber-reinforced composites. Polym. Bull. 74 (2017) 485-504
  • [17] Jose Humberto S. Almeida Jr., Samia D. B. Souza, Edson C. Botelho, Sandro C. Amico Carbon fiber-reinforced epoxy filament-wound composite laminates exposed to hygrothermal conditioning. J. Mater. Sci. 51 (2016) 4697-4708
  • [18] D. H. Choi, S. J. Oh, H. B. Cha, J. Y. Lee, Photochemically bifunctional epoxy compound containing a chalcone moiety. Eur. Polym. J. 37 (2001) 1951-1959
  • [19] Jalpa V. Chopda, Dharmesh B. Sankhavara, Jignesh P. Patel and P. H. Parsania, Synthesis and characterization of epoxy resin of (2E, 6E)-bis(4-hydroxy benzylidene)-4-methyl cyclohexanone. J. Polym. Mater. Accepted
  • [20] A. I. Vogel, A. R. Tatchell, B. S. Funis, A. J. Hannaford and P.W. G. Smith, Vogel’s textbook of practical organic chemistry, 5th Edn. Addison Wesley Longman Ltd., UK, 1998, p 395
  • [21] N. Mehta, P. Parsania, Fabrication and evaluation of some mechanical and electrical properties of jute‐biomass based hybrid composites. J Appl. Polym. Sci. 100 (2006) 1754-1758
  • [22] S. Das, A. K. Saha, P. K. Choudhury, R. K. Basak, B. C. Mitra, T. Todd, S. Lang and R. M. Rowell. Effect of steam pretreatment of jute fiber on dimensional stability of jute composite. J Appl. Polym. Sci. 76(2000) 1652-1661
  • [23] S. Pavlidou, C. Papaspyrides, The effect of hygrothermal history on water sorption and interlaminar shear strength of glass/polyester composites with different interfacial strength. Composites Part A: Appl. Sci. and Manuf. 34 (2003) 1117-1124
  • [24] T. Collings, Moisture absorption–Fickian diffusion kinetics and moisture profiles. Handbook of polymer fibre composites. UK: Longman Scientific and Technical: 1994 pp. 366-371
  • [25] Jignesh P. Patel and Parsotam H. Parsania, Comparative study of white jute and jute felt composites of tetra functional epoxy resin and araldites. World Scientific News 45(2) (2016) 63-79
  • [26] J. Wang, H. Ganga Rao, R. Liang, and W. Liu, Durability and prediction models of fiber-reinforced polymer composites under various environmental conditions: A critical review. J. Reinf. Plas.and Compos. 35(3) (2015) 179-211
  • [27] M. M. Thwe and K. Liao, Effects of environmental aging on the mechanical properties of bamboo–glass fiber reinforced polymer matrix hybrid composites. Composites Part A: Appl Sci and Manuf 33 (2002) 43-52
  • [28] M. M. Thwe and K. Liao, Environmental effects on bamboo-glass/polypropylene hybrid composites. J Mater Sci 38 (2003) 363-376
  • [29] B. N. Dash, A. K. Rana, H. K. Mishra, S. K. Nayak, S. S. Tripathy, Novel low‐cost jute–polyester composites. III. Weathering and thermal behavior. J Appl Polym Sci 78 (2000) 1671-1679
  • [30] S. Lin-Gibson, V. Baranauskas, J. S. Riffle and U. Sorathia, Cresol novolac–epoxy networks: properties and processability. Polymer 43 (2002) 7389-7398
  • [31] C. S. Tyberg, K. Bergeron, M. Sankarapandian, P. Shih, A. C. Loos, D. A. Dillard, J. E. McGrath, J. S. Riffle and U. Sorathia, Structure–property relationships of void-free phenolic–epoxy matrix materials. Polymer 41 (2000) 5053-5062
  • [32] L-R Bao and A. F. Yee, Effect of temperature on moisture absorption in a bismaleimide resin and its carbon fiber composites. Polymer 43(2002) 3987-3997
  • [33] Q. Lin, X. Zhou and G. Dai, Effect of hydrothermal environment on moisture absorption and mechanical properties of wood flour–filled polypropylene composites. J. Appl. Polym. Sci. 85 (2002) 2824-2832
  • [34] A. Espert, F. Vilaplana and S. Karlsson, Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties. Composites Part A: Appl. Sci. and Manuf. 35 (2004) 1267-1276
Document Type
Publication order reference
YADDA identifier
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.