Preferences help
enabled [disable] Abstract
Number of results
2015 | 21 | 12-23
Article title

Enhancement of Some Mechanical Properties of Polyethylene Glycol by Adding Carboxymethyl Cellulose as a Blends and Applied in Wood Glue

Title variants
Languages of publication
The (PEG/CMC) blends were prepared by liquids mixing method, the appropriate concentrations of PEG were (0.1-0.2 to 0.8 g/mL)% are dissolved in (500 mL) of distilled water under stirring without heat for (20 min.) then added the CMC with two weights (0.25 and 0.5) g for each PEG concentrates at (288 K). In order to evaluate the mechanical properties of (PEG/CMC) blends the ultrasonic measurements were performed at these samples, these properties are ultrasonic velocity, compressibility, acoustic impedance and bulk modulus, were made at fixed frequency (f = 25 kHz), another acoustic mechanical properties were measured and calculated at a same time such as the ultrasonic wave amplitude absorption by using oscilloscope, then calculated the absorption coefficient and the transmittance ratio of the sound. It was found that there is significant relationship between ultrasonic velocity and material properties results show that adding PEG effects on the density then on the absorption of the ultrasonic waves inside the blend samples. Finally applied this blend in various concentrations as additive to imported wood glue and found that increasing the adhesion force after adding comparing with pure. FT-IR test has been made.
Physical description
  • Department of Physics, College of Science, University of Babylon, Iraq
  • Department of Physics, College of Education for Pure Science, University of Babylon, Iraq
  • [1] Robinson J.S. and Swinton F.L., (1982). "Liquids and Liquid mixtures", VIII Ed. Butter Worth Scientific, London, 3.
  • [2] Biswal DR, Singh RP (2004). “Characterization of Carboxy methyl cellulose and poly acryl amide graft copolymer”, Carbo hyd. Polymer, 57: 379-387.
  • [3] Nie H, Liu M, Zhan F, Guo M (2004). “Factors on the preparation of Carboxy methyl cellulose hydro gel and its degradation behavior in soil” , Carbo hyd. polymer, 58: 185-189.
  • [4] Lubna Ghalib, Raouf Mahmood Raouf, Hadel Adeel, (2012). "Influence of Gamma Radiation on physicochemical properties of Polyacrylamide in ethylene glycol at room temperatures" University of Al-Mustansiriya- Bag.
  • [5] Boutouyrie P, Briet M, Collin C, Vermeersch S, Pannier B, (2009), Artery Research, 3(1): 3-8.
  • [6] Hassina Khelladi, Frederic Plantier, Jean Luc Daridon and Hakim Djelouah, (2009). “Measurements under High Pressure of Ultrasonic Wave Velocity in Glycerol”, IEEE International Ultrasonic Symposium Proceedings, 1567-1570.
  • [7] Cohen Marvin (1985). "Calculation of bulk moduli of diamond and zinc-blende solids". Phys. Rev. B, 32: 7988-7991.
  • [8] Abdul-Kareem J. Rashid and Burak Y. Kadem (2011) “Effect of variable ultrasonic frequencies on some physical properties of Iraqi palm fiber PVA composite”. Journal of Asian Scientific Research, 1(7); 359-365.
  • [9] Jarth Mc-Hugh, (2008). A thesis PhD Bundesanstalt fur Materialforschung und - prufung (BAM).
  • [10] Zong Fang Wu and Dong C. Liu (2011). “Method of improved scattered size estimation without Attenuation known a priori” Bioinformatics and Biomedical Engineering (ICBBE), 4th International Conference, IEEE, 8(10). 1-4.
  • [11] Josef and Herbert Krautkramer (1990). “Ultrasonic testing of materials” 4th edition, Springer.
  • [12] Dipak Basu (2001). Dictionary of pure and applied physics, CRC Press.
  • [13] Al-Bermany, (2013). "Ultrasonic study of HEC/ ZnO and HEC/ TiO2 film composites prepared by casting method" University of Babylon, Vol. 17.
  • [14] Oudry J, Bastard C, Miette V, Willinger R and Sandrin (2009). ”Ultrasound Medical Biolology”, 1185-97.
  • [15] T.G. Lazareva and E.V. Shingareva (2002). “Rheological and Electrophysical Characteristics of polyvinyl Alcohol and water- soluble Carboxymethyl Celluloseˮ, Russian Journal of Applied Chemistry, 75(10), 1688-1691.
  • [16] Hassina Khelladi, Frederic Plantier, Jean Luc Daridon and Hakim Djelouah, (2009). “Measurements under High Pressure of Ultrasonic Wave Velocity in Glycerol”, IEEE International Ultrasonic Symposium Proceedings, 1567-1570.
  • [17] Hasun S.K. (1989). ”Ultrasonic study and visco-relaxation of PVA”, British polymer Journal, 21, 333-338.
  • [18] R. Palani , S. Balakrishnan and A.Mohammed Sabeelullah Roomy, (2010). "Acoustical and thermodynamical properties of PEG in non-electrolytes at 303, 313 and 323 K", Archives of Physics Research, 1(4): 111-118 .
  • [19] Abdul-Kareem J. Rashid, Ehssan Dhiaa Jawad and Burak Y. Kadem (2011). “A Study of Some Mechanical Properties of Iraqi Palm Fiber-PVA Composite by Ultrasonic” European Journal of Scientific Research, 61(2); 203-209.
  • [20] Abdul-Kareem J., M. Ali and Karrar Abdali, (2015). "Study the Optical Properties of (PEG-Cellulose Derivatives) Polymer Blends and Prepared New Tire Package" Research and Reviews in Polymer J., 6(2), 48-59.
  • [21] Hassun S.K. and Rahman K. (1990). Ultrasonic Study of Molecular Association of High Impact Polystyrene Solutions in Toluene, Iraqi Journal of Science, 31(3), 24 -30.
  • [22] Lin-Shu Liu and Berg, (2002). "Adhesion barriers of carboxymethylcellulose and polyethylene oxide composite gels ", Journal of biochemical research A, 63, Iss. 3: 326-332.
Document Type
Publication order reference
YADDA identifier
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.