USE OF SAWDUST IMMOBILISED ON CHITOSAN FOR DISPOSAL OF DYES FROM WATER SOLUTIONS

• Authors: Paula Szymczyk , Urszula Filipkowska , Tomasz Jóźwiak , Małgorzata Kuczajowska-Zadrożna
• Languages of publication: EN

Abstracts

EN

In this article, the sorption properties of chitosan hydrogel beads, beech sawdust and sawdust immobilised on chitosan in relation to Reactive Black 5 (RB5) and Basic Violet 10 (BV10) dyes were compared. In the conducted research, the sorption capacities of the sorbents, sorption pH and the point of zero charge (pHZPC) were determined. For the description of the obtained results, the double Langmuir model has been used. The highest effectiveness of the cationic and anionic dye removal on chitosan hydrogel beads and sawdust immobilised on chitosan was obtained at pH 4, whereas on sawdust, the pH was 3. The best sorbent in relation to the RB5 dye was obtained using chitosan hydrogel beads, and in relation to BV10, it was sawdust. The maximum sorption capacity of chitosan in relation to RB5 was 875.66 mg/g, whereas the sorption capacity of sawdust in relation to BV10 was 30.15 mg/g. The research has shown that the sorbent in the form of sawdust immobilised on chitosan had a high sorption capacity in relation to anionic as well as cationic dyes. Immobilisation of sawdust on chitosan led to the creation of a universal sorbent in relation to cationic and anionic dyes.

Keywords

EN

Basic Violet 10; Reactive Black 5; chitosan; immobilisation; sawdust; sorption

• Publisher: Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
• Journal: Progress on Chemistry and Application of Chitin and its Derivatives
• Year: 2017
• Volume: 22
• Pages: 207 - 219

Contributors

author

Paula Szymczyk

• Department of Environmental Engineering, University of Warmia and Mazury in Olsztyn Warszawska 117 a, 10-719 Olsztyn

author

Urszula Filipkowska

• Department of Environmental Engineering, University of Warmia and Mazury in Olsztyn Warszawska 117 a, 10-719 Olsztyn

author

Tomasz Jóźwiak

• Department of Environmental Engineering, University of Warmia and Mazury in Olsztyn Warszawska 117 a, 10-719 Olsztyn

author

Małgorzata Kuczajowska-Zadrożna

• Department of Biotechnology in Environmental Protection, University of Warmia and Mazury in Olsztyn Słoneczna 45G,10–709 Olsztyn

References

• Umamaheswari G., Ramamurthy V.; (2015) Biodegradation of methylene blue and Congo red dyes by Aspergillus terreus inoculated on liquid media. International Journal of Recent Biotechnology 3, 9–19.
• Noroozi B., Sorial G. A.; (2013) Applicable models for multi-component adsorption of dyes: A review. Journal of Environmental Sciences 25(3), 419–429. DOI 10.1016/S1001-0742(12)60194-6
• Allen S. J., Mckay G., Porter J. F.; (2004) Adsorption isotherm models for basic dye adsorption by peat in single and binary component systems. Journal of Colloid and Interface Science 280(2), 322–333. DOI 10.1016/j.jcis.2004.08.078
• Lewis D. M.; (1999) Coloration in the next century. Review of Progress in Coloration and Related Topics 29(1), 23–28.
• Liang C. Z., Sun S. P., Li F. Y., Ong Y. K., Chung T. S.; (2014) Treatment of highly concentrated wastewater containing multiple synthetic dyes by a combined process of coagulation/flocculation and nanofiltration. Journal of Membrane Science 469, 306–315. DOI 10.1016/j.memsci.2014.06.057
• Liu X., Zhou Z., Jing G., Fang J.; (2013) Catalytic ozonation of Acid Red B in aqueous solution over a Fe–Cu–O catalyst. Separation and Purification Technology 115, 129–135. DOI 10.1016/j.seppur.2013.05.005
• Samhaber W. M., Nguyen M. T.; (2014) Applicability and costs of nanofiltration in combination with photocatalysis for the treatment of dye house effluents. Beilstein Journal of Nanotechnology 5(1), 476–484. DOI 10.3762/bjnano.5.55
• Dobritoiu R., Patachia, S.; (2013) A study of dyes sorption on biobased cryogels. Applied Surface Science 285, 56–64. DOI 10.1016/j.apsusc.2013.07.164
• Gierszewska M., Ostrowska- Czubenko J.; (2016) Equilibrium swelling study of crosslinked chitosan membranes in water, buffer and salt solutions. Progress on Chemistry and Application of Chitin and its Derivatives, 21, 55–62. DOI 10.15259/PCACD.21.05
• Nair V., Panigrahy A., Vinu R.; (2014) Development of novel chitosan–lignin composites for adsorption of dyes and metal ions from wastewater. Chemical Engineering Journal 254, 491–502. DOI 10.1016/j.cej.2014.05.045
• Kumar G. V., Ramalingam P., Kim M. J., Yoo C. K., Kumar M. D.; (2010) Removal of acid dye (violet 54) and adsorption kinetics model of using musa spp waste: A low-cost natural sorbent material. Korean Journal of Chemical Engineering 27(5), 1469–1475. DOI 10.1007/s11814-010-0226-3
• Ahmad A., Rafatullah M., Sulaiman O., Ibrahim M. H., Hashim R.; (2009) Scavenging behaviour of meranti sawdust in the removal of methylene blue from aqueous solution. Journal of Hazardous Materials 170(1), 357–365. DOI 10.1016/j.jhazmat.2009.04.087
• González J. A., Villanueva M. E., Piehl L. L., Copello G. J.; (2015) Development of a chitin/graphene oxide hybrid composite for the removal of pollutant dyes: adsorption and desorption study. Chemical Engineering Journal 280, 41–48. DOI 10.1016/j.cej.2015.05.112
• Vakili M., Rafatullah M., Ibrahim M. H., Abdullah A. Z., Salamatinia B., Gholami Z.; (2016) Chitosan hydrogel beads impregnated with hexadecylamine for improved reactive blue 4 adsorption. Carbohydrate polymers 137, 139–146. DOI 10.1016/j.carbpol.2015.09.017
• Dulman V., Cucu-Man S. M.; (2009) Sorption of some textile dyes by beech wood sawdust. Journal of Hazardous Materials 162(2), 1457–1464. DOI 10.1016/j.jhazmat.2008.06.046
• Guo Y., Zhao J., Zhang H., Yang S., Qi J., Wang Z., Xu H.; (2005) Use of rice husk-based porous carbon for adsorption of Rhodamine B from aqueous solutions. Dyes and Pigments 66(2), 123–128. DOI 10.1016/j.dyepig.2004.09.014
• Zhang J., Gondal M. A., Wei W., Zhang T., Xu Q., Shen, K.; (2012) Preparation of room temperature ferromagnetic BiFeO 3 and its application as an highly efficient magnetic separable adsorbent for removal of Rhodamine B from aqueous solution. Journal of Alloys and Compounds 530, 107–110. DOI 10.1016/j.jallcom.2012.03.104
• Shen K., Gondal M. A.; (2013) Removal of hazardous Rhodamine dye from water by adsorption onto exhausted coffee ground. Journal of Saudi Chemical Society, Vol.21, 120–127. DOI 10.1016/j.jscs.2013.11.005
• Anandkumar J., Mandal B.; (2011) Adsorption of chromium (VI) and Rhodamine B by surface modified tannery waste: Kinetic, mechanistic and thermodynamic studies. Journal of Hazardous Materials 186(2), 1088–1096. DOI 10.1016/j.jhazmat.2010.11.104
• Chai L., Wang Y., Zhao N., Yang W., You X.; (2013) Sulfate-doped Fe3O4/Al2O3 nanoparticles as a novel adsorbent for fluoride removal from drinking water. Water Research 47(12), 4040–4049. DOI 10.1016/j.watres.2013.02.057
• Liu Q., Yang B., Zhang L., Huang R.; (2015) Adsorption of an anionic azo dye by cross-linked chitosan/bentonite composite. International Journal of Biological Macromolecules 72, 1129–1135. DOI 10.1016/j.ijbiomac.2014.10.008
• Garg V. K., Amita M., Kumar R., Gupta R.; (2004) Basic dye (methylene blue) removal from simulated wastewater by adsorption using Indian Rosewood sawdust: a timber industry waste. Dyes and pigments 63(3), 243–250. DOI 10.1016/j.dyepig.2004.03.005
• Annadurai G., Juang R. S., Lee D. J.; (2002) Use of cellulose-based wastes for adsorption of dyes from aqueous solutions. Journal of Hazardous Materials 92(3), 263–274. DOI 10.1016/S0304-3894(02)00017-1
• Ferrero F.; (2007) Dye removal by low cost adsorbents: Hazelnut shells in comparison with wood sawdust. Journal of Hazardous Materials 142(1), 144–152. DOI 10.1016/j.jhazmat.2006.07.072
• Wang L., Wang A.; (2007) Adsorption characteristics of Congo red onto the chitosan/montmorillonite nanocomposite. Journal of Hazardous Materials 147(3), 979–985. DOI 10.1016/j.jhazmat.2007.01.145
• Vanamudan A., Bandwala K., Pamidimukkala P.; (2014) Adsorption property of Rhodamine 6G onto chitosan-g-(N-vinyl pyrrolidone)/montmorillonite composite. International journal of biological macromolecules 69, 506–513. DOI 10.1016/j.ijbiomac.2014.06.012
• Chang M. Y., Juang R. S.; (2004) Adsorption of tannic acid, humic acid, and dyes from water using the composite of chitosan and activated clay. Journal of Colloid and Interface Science 278(1), 18–25. DOI 10.1016/j.jcis.2004.05.029

• Document Type: article