PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 83 | 29-44
Article title

Synthesis and characterisation of porous, calcium enriched coatings formed on Titanium via Plasma Electrolytic Oxidation

Content
Title variants
Languages of publication
EN
Abstracts
EN
The SEM and EDS study results of porous and calcium enriched coatings obtained via Plasma Electrolytic Oxidation (Micro Arc Oxidation) on the Commercial Purity Titanium Grade 2 samples, at three potentials 450 VDC, 550 VDC, 650 VDC in electrolytes containing 500 g Ca(NO3)2∙4H2O in 1000 mL H3PO4, are presented in the paper. In the same electrolyte three Titanium samples, one after other, were treated, with the PEO processing time equaling 3 minutes after each immersion. Based on SEM and EDS results, it was possible to state that all obtained coatings are porous and their calcium-to-phosphorus (Ca/P) ratio decreases with decreasing PEO voltage. In addition, it was found out that electrolyte aging results in decreasing Ca/P ratio, too.
Discipline
Year
Volume
83
Pages
29-44
Physical description
Contributors
  • Division of Bioengineering and Surface Electrochemistry, Department of Engineering and Informatics Systems, Faculty of Mechanical Engineering, Koszalin University of Technology, Racławicka 15-17, PL 75-620 Koszalin, Poland
  • Division of Bioengineering and Surface Electrochemistry, Department of Engineering and Informatics Systems, Faculty of Mechanical Engineering, Koszalin University of Technology, Racławicka 15-17, PL 75-620 Koszalin, Poland
  • Division of Bioengineering and Surface Electrochemistry, Department of Engineering and Informatics Systems, Faculty of Mechanical Engineering, Koszalin University of Technology, Racławicka 15-17, PL 75-620 Koszalin, Poland
References
  • [1] Hryniewicz T., On Discrepancies between Theory and Practice of Electropolishing, Materials Chemistry and Physics 15(2) (1987) 139-154
  • [2] Hryniewicz T., Hryniewicz Z., On the solution of equation of diffusion in electropolishing, Journal of the Electrochemical Society 136(12) (1989) 3767-3769
  • [3] Hryniewicz T. (1989) Physico-chemical and technological fundamentals of electropolishing steels (Fizykochemiczne i technologiczne podstawy procesu elektropolerowania stali), Monograph No. 26, Koszalin University of Technology Publishing (in Polish)
  • [4] Hryniewicz T. (2007) On the surface treatment of metallic biomaterials (Wstęp do obróbki powierzchniowej biomateriałów metalowych), Koszalin University of Technology Publishing House (in Polish)
  • [5] Hryniewicz T., Rokosz K., Zschommler Sandim H.R., (2012) SEM/EDX and XPS studies of niobium after electropolishing, Applied Surface Science 263 (2012) 357-361
  • [6] Rokicki R., Hryniewicz T., Enhanced oxidation-dissolution theory of electropolishing, Transactions of The Institute of Metal Finishing 90(4) (2012) 188-196, DOI: 10.1179/0020296712Z.00000000031
  • [7] Hryniewicz T., Rokosz K., Rokicki R., Magnetoelectropolishing Process Improves Characteristics of Finished Metal Surfaces, Metal Finishing 104(12) (2006) 26-33
  • [8] Rokosz K., Electrochemical Polishing in magnetic field (Polerowanie elektrochemiczne w polu magnetycznym), Koszalin University of Technology Publishing House,Koszalin, 2012 (in Polish)
  • [9] Hryniewicz T., Rokicki R., Rokosz K., Co-Cr alloy corrosion behaviour after electropolishing and "magnetoelectropolishing" treatments, Surface and Coatings Technology 62(17-18) (2008) 3073-3076
  • [10] Hryniewicz T., Rokosz K., Analysis of XPS results of AISI 316L SS electropolished and magnetoelectropolished at varying conditions, Surface and Coatings Technology 204(16-17) (2010) 2583-2592
  • [11] Hryniewicz T., Rokicki R., Rokosz K., Magnetoelectropolishing for metal surface modification, Transactions of The Institute of Metal Finishing 85(6) (2007) 325-332
  • [12] Hryniewicz T., Rokicki R., Rokosz K., Corrosion and surface characterization of titanium biomaterial after magnetoelectropolishing. Surface and Coatings Technology 203(9) (2008) 1508-1515
  • [13] Rokicki R., Hryniewicz T., Rokosz K., Modifying Metallic Implants with Magnetoelectropolishing, Medical Device and Diagnostic Industry 30(1) (2008) 102-111 (Invited Paper)
  • [14] Hryniewicz T., Lewicka-Rataj K., Rokosz K., On the biological response of austenitic stainless steels after electrochemical -EP and MEP- polishing, World Scientific News 80 (2017) 284-296
  • [15] Hryniewicz T., Rokosz K., Polarization characteristics of magnetoelectropolishing stainless steels, Materials Chemistry and Physics 122(1) (2010) 169-174
  • [16] Rokosz K., Hryniewicz T., Raaen S., Characterization of passive film formed on AISI 316L stainless steel after magnetoelectropolishing in a broad range of polarization parameters, Journal of Iron and Steel Research 83(9) (2012) 910-918
  • [17] Hryniewicz T., Rokosz K., Investigation of selected surface properties of AISI 316L SS after magnetoelectropolishing, Materials Chemistry and Physics 123(1) (2010) 47-55
  • [18] Hryniewicz T, Rokosz K., Corrosion resistance of magnetoelectropolished AISI 316L SS biomaterial, Anti-Corrosion Methods and Materials 61(2) (2014) 57-64
  • [19] Hryniewicz T., Rokosz K., Valiček J., Rokicki R., Effect of magnetoelectropolishing on nanohardness and Young’s modulus of titanium biomaterial, Materials Letters 83 (21012) 69-72
  • [20] Hryniewicz T., Rokosz K., Rokicki R., Prima F., Nanoindentation and XPS Studies of Titanium TNZ Alloy after Electrochemical Polishing in a Magnetic Field, Materials 8 (2015) 205-215
  • [21] Rokicki R., Hryniewicz T., Pulletikurthi C., Rokosz K., Munroe N., Towards a Better Corrosion Resistance and Biocompatibility Improvement of Nitinol Medical Devices, Journal of Materials Engineering and Performance, 24 (2015) 1634-1640, online DOI: 10.1007/s11665-015-1429-x (7 pages)
  • [22] Rokosz K., Hryniewicz T., XPS Analysis of nanolayers obtained on AISI 316L SS after Magnetoelectropolishing, World Scientific News, 37 (2016) 232-248
  • [23] Rokosz K., Hryniewicz T., Simon F., Rzadkiewicz S., Comparative XPS analysis of passive layers composition formed on AISI 304 L SS after standard and high-current density electropolishing, Surface and Interface Analysis 47(1) (2015) 87-92
  • [24] Rokosz K., Lahtinen J., Hryniewicz T., Rzadkiewicz S., XPS depth profiling analysis of passive surface layers formed on austenitic AISI 304L and AISI 316L SS after high-current-density electropolishing, Surface and Coatings Technology 276 (2015) 516-520
  • [25] Rokosz K., Hryniewicz T., Simon F., Rzadkiewicz S., Comparative XPS analyses of passive layers composition formed on duplex 2205 SS after standard and high-current-density electropolishing, Tehnicki vjesnik - Technical Gazette 23(3) (2016) 731-735
  • [26] Rokosz K., Hryniewicz T., Chapon P., Raaen S., Zschommler Sandim H.R., XPS and GDOES characterisation of porous coating enriched with copper and calcium obtained on Tantalum via Plasma Electrolytic Oxidation, Journal of Spectroscopy 2016, Article ID 7093071, 7 pages, http://dx.doi.org/10.1155/2016/7093071
  • [27] Han Y., Hong S.H., Xu K.W., (2003) Structure and in vitro bioactivity of titania-based films by micro-arc oxidation, Surface and Coatings Technology 168 (2003) 249-258
  • [28] Simka W., Sadowski A., Warczak M., Iwaniak A., Dercz G., Michalska J., Maciej A., Modification of titanium oxide layer by calcium and phosphorus, Electrochimica Acta 56(24) (2009) 8962-8968
  • [29] Rokosz K., Hryniewicz T., Raaen S., Chapon P., Dudek Ł., GDOES, XPS and SEM with EDS analysis of porous coatings obtained on Titanium after Plasma Electrolytic Oxidation, Surface and Interface Analysis 49(4) (2016) 303–315; DOI 10.1002/sia.6136
  • [30] Han Y., Hong S.H., Xu K.W., Synthesis of nanocrystalline titania films by micro-arc oxidation, Materials Letters 56 (2002) 744-747
  • [31] Fei C., Hai Z., Chen C., Yangjian X., Study on the tribological performance of ceramic coatings on titanium alloy surfaces obtained through microarc oxidation, Progress in Organic Coatings 64 (2009) 264-267
  • [32] Aliasghari S., (2014) Plasma Electrolytic Oxidation of Titanium. PhD thesis of Faculty of Engineering and Physical Sciences, The University of Manchester, School of Materials: 223 pages
  • [33] Teh T.H., Berkani A., Mato S., Skeldon P., Thompson G.E., Habazaki H., Shimizu K., Initial stages of plasma electrolytic oxidation of titanium, Corrosion Science 45 (2003) 2757-2768
  • [34] Wang Y., Jiang B., Lei T., Guo L., (2004) Dependence of growth features of microarc oxidation coatings of titanium alloy on control modes of alternate pulse, Materials Letters 58(12) (2004) 1907-1911
  • [35] Simka W., Nawrat G., Chlode J., Maciej A., Winiarski A., Szade J., Radwanski K., Gazdowicz J., Electropolishing and anodic passivation of Ti6Al7Nb alloy, Przemysł Chemiczny 90(1) (2011) 84-90
  • [36] Krząkala A., Mlynski J., Dercz G., Michalska J., Maciej A., Nieuzyla L., Simka W., Modification of Ti-6Al-4V alloy surface by EPD-PEO process in ZrSiO4 suspension, Archives of Metallurgy and Materials 59(1) (2014) 199-204
  • [37] Rokosz K., Hryniewicz T., Raaen S., Development of Plasma Electrolytic Oxidation for improved Ti6Al4V biomaterial surface properties, The International Journal of Advanced Manufacturing Technology 85 (2016) 2425-2437; DOI: 10.1007/s00170-015-8086-y
  • [38] Rokosz K., Hryniewicz T., Raaen S., Chapon P., Investigation of porous coatings obtained on Ti-Nb-Zr-Sn alloy biomaterial by Plasma Electrolytic Oxidation: Characterisation and Modelling, The International Journal of Advanced Manufacturing Technology 2016; DOI 10.1007/s00170-016-8692-3
  • [39] Rokosz K., Hryniewicz T., Raaen S., Chapon P., Development of copper-enriched porous coatings on ternary Ti-Nb-Zr alloy by Plasma Electrolytic Oxidation, The International Journal of Advanced Manufacturing Technology 89 (9-12) (2017) 2953–2965; DOI 10.1007/s00170-016-9206-z
  • [40] Rokosz K., Hryniewicz T., Raaen S., SEM, EDS and XPS analysis of nanostructured coating obtained on NiTi biomaterial alloy by Plasma Electrolytic Oxidation (PEO), Tehnički vjesnik-Technical Gazette 24(1) (2017) 193-198
  • [41] Rokosz K., Hryniewicz T., Raaen S., Malorny W., Fabrication and Characterisation of Porous Coatings Obtained by Plasma Electrolytic Oxidation, Journal of Mechanical and Energy Engineering 1(1|4) (2017) 23-30
  • [42] Elliott J.C., (1994) Structure and Chemistry of Apatites and Other Calcium Orthophosphates. Elsevier, Amsterdam, The Netherlands, 1st edition, 404 pages, eBook ISBN: 9781483290317, Hardcover ISBN: 9780444815828
  • [43] Elliott J.C., Wilson R.M., Dowker S.E.P., APATITE STRUCTURES, Advances in X-ray Analysis 45 (2002) 172-181
  • [44] Dorozhkin S.V., Calcium orthophosphates in nature, biology and medicine. Materials 2(2) (2009) 399-498
  • [45] Rokosz K., Hryniewicz T., Characteristics of porous and biocompatible coatings obtained on Niobium and Titanium-Niobium-Zirconium (TNZ) alloy by Plasma Electrolytic Oxidation, Mechanik, 12 (2015) 15-18; DOI: 10.17814/mechanic.2015.12.530
  • [46] Zakharov N.A., Polunina I.A., Polunin K.E., Rakitina N.M., Kochetkova E.I., Sokolova N.P., Kalinnikov V.T., Calcium hydroxyapatite for medical applications, Inorganic Materials 40(6) (2004) 641–648.
  • [47] Rokosz K., Hryniewicz T., Plasma Electrolytic Oxidation as a modern method to form porous coatings enriched in phosphorus and copper on biomaterials, World Scientific News, 35 (2016) 44-61
  • [48] Rokosz K., Hryniewicz T., Dudek Ł., Matýsek D., Valíček J., Harničarova M., SEM and EDS Analysis of Surface Layers Formed on Titanium After Plasma Electrolytic Oxidation in H3PO4 with the Addition of Cu(NO3)2, Journal of Nanoscience and Nanotechnology, 16 (2016) 1-4; DOI: 10.1166/jnn.2016.12558
  • [49] Rokosz K., Hryniewicz T., Pietrzak K., Dudek Ł., Malorny W., SEM and EDS studies of selected porous coatings obtained on titanium by Plasma Electrolytic Oxidation, World Scientific News, 70(2) (2017) 71-85
  • [50] Rokosz K., Hryniewicz T., Pietrzak K., SEM and EDS studies of porous coatings enriched in calcium and zinc obtained by PEO with ramp voltage, World Scientific News, 74(2) (2017) 242-255
  • [51] Rokosz K., Hryniewicz T., Pietrzak K., Dudek Ł., Development and SEM/EDS characterisation of porous coatings enriched in magnesium and copper obtained on titanium by PEO with ramp voltage, World Scientific News, 80 (2017) 29-42
  • [52] Rokosz K., Hryniewicz T., Pietrzak K., Dudek Ł., Malorny W., SEM and EDS characterization of porous coatings obtained on Titanium by Plasma Electrolytic Oxidation in electrolyte containing concentrated phosphoric acid with zinc nitrate, Advances in Materials Science, 17(2)/52 (2017) 41-54
Document Type
article
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.psjd-2f11f7a1-b159-4696-9d26-fafd9cb45c07
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.