Evaluation of seepage and slope stability analysis of embankment dam: a case study of Shimburit micro earthen dam, Amhara region, Ethiopia

• Authors: Amanuel Zewdu Belew , Tesfahun Jegnie , Abeba Mulat , Habtamu Getacher , Dasash Abebaw , Temesgen Desie
• Languages of publication: EN

Abstracts

EN

Nowadays, the primary and most significant reason for ensuring the overall safety of earthen dams is to monitor seepage and slope stability. This study was carried out to evaluate the static condition seepage and slope stability performances of the Shimburit earthen dam, which is located in the Amhara National Regional State, eastern zoning of Gojjam, D/Elias woreda, in particular kebele of Yegdad and Yekomit. PLAXIS 2D software was used to investigate the seepage and slope stability of the dam under various loading conditions in this study. The PLAXIS 2D program was used to simulate seepage analysis, which included determining the quantity of discharge per unit length, pore water distribution, and the location of the phreatic line. The maximum cross-section of the Shimburit main dam is expected to have a seepage flow rate of 10.31×10-6 m3/s/m through the dam body and 28.06×10-6 m3/s/m through the foundation at normal pool level without an upstream filter. Pore water pressure is zero at the normal pool level and 262.60 KN/m2 at the bottom of the boundary condition. The phreatic line emerged below the toe of the dam. This means that the dam is not at risk of sloughing. The most critical element affecting the stability of an earth dam is seepage. Three different loading conditions are studied for stability analysis: end-of-construction, steady-state seepage, and rapid drawdown. The FOS values obtained at the end of construction, steady-state, and rapid drawdown conditions were 1.5631, 1.4441, and 1.2338, respectively. As the loading situation increases, the factor of safety results drops, i.e. 1.5631 > 1.4441 > 1.2338. All the factor of safety is greater than one, therefore, the dam is safe at all critical conditions, or the probability of failures of the dam will not be likely to happen. Using recognized design standards such as the USACE, USBR, NRCS, and BDS, the dam is found to be stable under all critical loading conditions.

Keywords

EN

Amhara regon; Dam; PLAXIS 2D; Seepage; Slope stability

Discipline

• ENVIRONMENT_&_ECOLOGY: ENVIRONMENT & ECOLOGY

• Publisher: Scientific Publishing House „DARWIN”
• Journal: World News of Natural Sciences
• Year: 2022
• Volume: 40
• Pages: 26-48

Contributors

author

Amanuel Zewdu Belew

• Department of Hydraulic and Water Resources Engineering, Debre Tabor University, Debre Tabor, Ethiopia

author

Tesfahun Jegnie

• Department of Hydraulic and Water Resources Engineering, Debre Tabor University, Debre Tabor, Ethiopia

author

Abeba Mulat

• Department of Hydraulic and Water Resources Engineering, Debre Tabor University, Debre Tabor, Ethiopia

author

Habtamu Getacher

• Department of Hydraulic and Water Resources Engineering, Debre Tabor University, Debre Tabor, Ethiopia

author

Dasash Abebaw

• Department of Hydraulic and Water Resources Engineering, Debre Tabor University, Debre Tabor, Ethiopia

author

Temesgen Desie

• Department of Hydraulic and Water Resources Engineering, Debre Tabor University, Debre Tabor, Ethiopia

References

• [1] Addis, W., & Abebaw, A. (2017). Determination of heavy metal concentration in soils used for cultivation of Allium sativum L. (garlic) in East Gojjam Zone, Amhara Region, Ethiopia. Cogent Chemistry, 3(1), 1419422
• [2] Alonso, E. E., & Cardoso, R. (2010). Behavior of materials for earth and rockfill dams: Perspective from unsaturated soil mechanics. Frontiers of Architecture and Civil Engineering in China, 4(1), 1-39
• [3] Asmare, D., & Tesfa, C. (2021). Landslide Hazard Zonation and Evaluation around Debre Werk Town, North West Ethiopia. DOI: 10.21203/rs.3.rs-797670/v1
• [4] Belay, M. (2019). The roles of urban agriculture for climate change adaption in the case of Debre Markos town and surrounding districts East Gojjam Zone Amhara Region Ethiopia. World Rural Observations, 11(4), 35-41
• [5] Duncan, J. M., & Dunlop, P. (1969). Slopes in stiff-fissured clays and shales. Journal of the Soil Mechanics and Foundations Division, 95(2), 467-492
• [6] FEMA, US Army Corps of Engineers (2015) Water Control Infrastructure – National Inventory of Dams Federal Emergency Management.
• [7] Heibaum, M. (2014). Geosynthetics for waterways and flood protection structures–controlling the interaction of water and soil. Geotextiles and Geomembranes, 42(4), 374-393
• [8] Khadija, B., Lahcen, B., Latifa, O., & Ahmed, A. (2012). Slope stability evaluations by limit equilibrium and finite element methods applied to a railway in the Moroccan Rif. Open Journal of Civil Engineering, 2, 27-32
• [9] Natural Resources Conservation Service, (2005). Residue and Tillage Management, No-Till. United States Department of Agriculture, Practice Code: 329
• [10] Song, J., Sciubba, M., & Kam, J. (2021). Risk and Impact Assessment of Dams in the Contiguous United States Using the 2018 National Inventory of Dams Database. Water, 13(8), 1066
• [11] Tedd, P., & Charles, J. A. (2010). Publications and bibliographies of the British Dam Society. Dams and Reservoirs 20(4), 151-161
• [12] Touri, R. A. Z., Pourbakhshian, S., & Pouraminian, M. (2015). Experimental and Numerical Study of the Effect of PET Recycling Admixtures on Pore Water Pressure and Output Discharge in Homogeneous Earth Dams. Journal of Civil Engineering and Urbanism 5(1), 31-34
• [13] Uromeihy, A., & Barzegari, G. (2007). Evaluation and treatment of seepage problems at Chapar-Abad Dam, Iran. Engineering Geology, 91(2-4), 219-228
• [14] USACE. (2003). General Design and Construction Considerations for Earth and Rock-Fill Dams. Engineering and Design EM 1110-2-2300. Department of the Army, Washington.
• [15] USBR (2011). Embankment Dams, Design Standards No. 13, U.S. Department of Commerce Van Nostrand Reinhold, New York.
• [16] Wan, C. F., & Fell, R. (2004). Investigation of rate of erosion of soils in embankment dams. Journal of Geotechnical and Geoenvironmental Engineering, 130(4), 373-380

• Document Type: article