2021

• Journal: Bulletin of the Polish Academy of Sciences: Technical Sciences
• Publisher: Polska Akademia Nauk

• 2021
  • article: Wind tunnel tests of hovering propellers in the transition state of Quad-Plane (Pobikrowska K., Goetzendorf-Grabowski T., Pobikrowska K., Goetzendorf-Grabowski T.)
    •  
  • article: Visual methods of processing survey data in social disciplines based on fuzzy logic (Śmigielski G., Mreła A., Sokolov O., Nedashkovskyy M., Śmigielski G., Mreła A., Sokolov O., Nedashkovskyy M.)
    •  
  • article: Vibration control of rotors mounted in hydrodynamic bearings lubricated with magnetically sensitive oil by changing their load capacity (Zapoměl J., Ferfecki P., Zapoměl J., Ferfecki P.)
    •  
  • article: Use of natural dyes for the fabrication of dye-sensitized solar cell: a review (Bhargava C., Sharma P. K., Bhargava C., Sharma P. K.)
    •  
  • article: Ultra-fast hybrid systems for protecting direct current circuits with high magnetic energy (Bartosik M., Borkowski P., Wójcik F., Bartosik M., Borkowski P., Wójcik F.)
    •  
  • article: Transient simulation of a squeeze film damped turbocharger rotor under consideration of fluid inertia and cavitation (Drapatow T., Alber O., Woschke E., Drapatow T., Alber O., Woschke E.)
    •  
  • article: Trajectory tracking control of a mobile manipulator with an external force compensation (Galicki M., Galicki M.)
    •  
  • article: Traction power supply with three paralleled single phase voltage source inverters (Płatek T., Osypinski T., Chłodnicki Z., Płatek T., Osypinski T., Chłodnicki Z.)
    •  
  • article: Topology optimization without volume constraint – the new paradigm for lightweight design (Nowak M., Boguszewski A., Nowak M., Boguszewski A.)
    •  
  • article: Topology algorithm built as an automaton with flexible rules (Tajs-Zielińska K., Bochenek B., Tajs-Zielińska K., Bochenek B.)
    •  
  • article: Time invariant property of weighted circular convolution and its application to continuous wavelet transform (Yi H., Ru Y.-L., Dai Y.-Y., Yi H., Ru Y.-L., Dai Y.-Y.)
    •  
  • article: Theoretical study of heat conduction in the multi-disc brake integrated into the drive wheel AGV during braking (Varecha D., Kohár R., Lukáč M., Varecha D., Kohár R., Lukáč M.)
    •  
  • article: The relationship between the structural anisotropy of the PFA polymer/compressed expanded graphite-matrix composites and acoustic emission characteristics (Berdowska S., Berdowski J., Frederic A., Berdowska S., Berdowski J., Frederic A.)
    •  
  • article: The real-time simulator using MATLAB/Simulink software for closed-loop coordination protection devices testing (Smolarczyk A., Łapczyński S., Szulborski M., Kolimas Ł., Kozarek Ł., Smolarczyk A., Łapczyński S., Szulborski M., Kolimas Ł., Kozarek Ł.)
    •  
  • article: The implicit numerical method for the one-dimensional anomalous subdiffusion equation with a nonlinear source term (Błasik M., Błasik M.)
    •  
  • article: The impact of the COVID-19 pandemic on cybercrime (Gryszczyńska A., Gryszczyńska A.)
    •  
  • article: The composting of PLA/HNT biodegradable composites as an eco-approach to the sustainability (Czarnecka-Komorowska D., Bryll K., Kostecka E., Tomasik M., Piesowicz E., Gawdzińska K., Czarnecka-Komorowska D., Bryll K., Kostecka E., Tomasik M., Piesowicz E., Gawdzińska K.)
    •  
  • article: Targeted modification of the composition of polymer systems for industrial applications (Ondrušová D., Labaj I., Pajtášová M., Vršková J., Božeková S., Feriancová A., Skalková P., Ondrušová D., Labaj I., Pajtášová M., Vršková J., Božeková S., Feriancová A., Skalková P.)
    •  
  • article: Synthesis of Mg-based alloys with rare-earth element addition by means of mechanical alloying (Lesz S., Hrapkowicz B., Gołombek K., Karolus M., Janiak P., Lesz S., Hrapkowicz B., Gołombek K., Karolus M., Janiak P.)
    •  
  • article: Structure and properties of suction-cast Pr-(Fe, Co)-(Zr, Nb)-B rod magnets (Pawlik K., Pawlik K.)
    •  
  • article: State-of-the-art rotordynamic analyses of pumps (Gaulard F., Schmied J., Fuchs A., Gaulard F., Schmied J., Fuchs A.)
    •  
  • article: Stability and robustness analysis of discrete-time fractional-piecewise-constant-order PID controller (Oziablo P., Mozyrska D., Wyrwas M., Oziablo P., Mozyrska D., Wyrwas M.)
    •  
  • article: Specific emitter identification based on one-dimensional complex-valued residual networks with an attention mechanism (Qu L., Yang J., Huang K., Liu H., Qu L., Yang J., Huang K., Liu H.)
    •  
  • article: Simulative investigation of rubber damper elements for planetary touch-down bearings (Schüßler B., Hopf T., Rinderknecht S., Schüßler B., Hopf T., Rinderknecht S.)
    •  
  • article: Silicon nitride/carbon nanotube composites: preparation and characterization (Mikuśkiewicz M., Mikuśkiewicz M.)
    •  
  • article: Semiquantum authentication of users resistant to multisession attacks (Zawadzki P., Zawadzki P.)
    •  
  • article: Selected requirements for lightning protection in the light of actual standards and regulations on the example of an object to be protected (Dąda A., Błaut P., Miller P., Dąda A., Błaut P., Miller P.)
    •  
  • article: Selected information technology tools supporting maintenance and operation management electrical grids (Kamrat W., Kamrat W.)
    •  
  • article: Selected aspects of wind and photovoltaic power plant operation and their cooperation (Lange A., Pasko M., Grabowski D., Lange A., Pasko M., Grabowski D.)
    •  
  • article: Rotor dynamics ― four open questions (Kiciński J., Kiciński J.)
    •  
  • article: Retraction notice Machining of microholes in Ti-6Al-4V by hybrid micro-electrical discharge machining to improve process parameters and flushing properties
    •  
  • article: Research on stability and sensitivity of the rotating machines with overhung rotors to lateral vibrations (Szolc T., Konowrocki R., Szolc T., Konowrocki R.)
    •  
  • article: Research on hybrid modified pathfinder algorithm for optimal reactive power dispatch (Suresh V., Senthil Kumar S., Suresh V., Senthil Kumar S.)
    •  
  • article: Quasi-analytical solutions for the whirling motion of multi-stepped rotors with arbitrarily distributed mass unbalance running in anisotropic linear bearings (Klanner M., Prem M. S., Ellermann K., Klanner M., Prem M. S., Ellermann K.)
    •  
  • article: PVA hydrogel deformation in response to change in temperature or pH (Kazimierska-Drobny K., Kazimierska-Drobny K.)
    •  
  • article: Probability distribution functions for service loads of frame scaffoldings (Błazik-Borowa E., Pieńko M., Szer I., Hoła B., Czarnocki K., Błazik-Borowa E., Pieńko M., Szer I., Hoła B., Czarnocki K.)
    •  
  • article: Predictive torque control of induction motor drive with reduction of torque and flux ripple (Kiani B., Mozafari B., Soleymani S., Mohammadnezhad Shourkaei H., Kiani B., Mozafari B., Soleymani S., Mohammadnezhad Shourkaei H.)
    •  
  • article: Power supply with parallel reactive and distortion power compensation and tunable inductive filter — Part 2 (Gwóźdź M., Wojciechowski R., Ciepliński Ł., Gwóźdź M., Wojciechowski R., Ciepliński Ł.)
    •  
  • article: Positive electrical circuits with the chain structure and cyclic Metzler state matrices (Kaczorek T., Kaczorek T.)
    •  
  • article: Physics-guided neural networks (PGNNs) to solve differential equations for spatial analysis (Borzyszkowski B., Damaszke K., Romankiewicz J., Świniarski M., Moszyński M., Borzyszkowski B., Damaszke K., Romankiewicz J., Świniarski M., Moszyński M.)
    •  
  • article: Optimised magnetron sputtering method for the deposition of indium tin oxide layers (Musztyfaga-Staszuk M., Pudiš D., Socha R., Gawlińska-Nęcek K., Panek P., Musztyfaga-Staszuk M., Pudiš D., Socha R., Gawlińska-Nęcek K., Panek P.)
    •  
  • article: Operation of Fabry-Perot laser with nonlinear PT-symmetric mirror (Mossakowska-Wyszyńska A., Witoński P., Szczepański P., Mossakowska-Wyszyńska A., Witoński P., Szczepański P.)
    •  
  • article: On elastic contact problems of micro-periodic slant layered composite pressed by a rigid punch with a parabolic or rectangular shape (Sebestianiuk P., Perkowski D. M., Kulchytsky-Zhyhailo R., Sebestianiuk P., Perkowski D. M., Kulchytsky-Zhyhailo R.)
    •  
  • article: Numerical benchmarks for topology optimization of structures with stress constraints (Fiuk G., Mrzygłód M. W., Fiuk G., Mrzygłód M. W.)
    •  
  • article: Non-fragile event-triggered control of positive switched systems with random nonlinearities and controller perturbations (Wu Y., Zhang J., Fu S., Wu Y., Zhang J., Fu S.)
    •  
  • article: New model of the sedimentation process of polydisperse post-coagulation suspension (Rząsa M., Łukasiewicz E., Rząsa M., Łukasiewicz E.)
    •  
  • article: Multivoltaic GaSe clathrate as new hybrid functional nanostructure (Ivashchyshyn F., Pidluzhna A., Calus D., Hryhorchak O., Chabecki P., Makarchuk O., Ivashchyshyn F., Pidluzhna A., Calus D., Hryhorchak O., Chabecki P., Makarchuk O.)
    •  
  • article: Multi-sourced power system restoration strategy based on modified Prim’s algorithm (Łukaszewski A., Nogal Ł., Łukaszewski A., Nogal Ł.)
    •  
  • article: Multi-model hybrid ensemble weighted adaptive approach with decision level fusion for personalized affect recognition based on visual cues (Jadhav N., Sugandhi R., Jadhav N., Sugandhi R.)
    •  
  • article: Modern methods in the field of machine modelling and simulation as a research and practical issue related to industry 4.0 (Rojek I., Macko M., Mikołajewski D., Sága M., Burczyński T., Rojek I., Macko M., Mikołajewski D., Sága M., Burczyński T.)
    •  
  • article: Modern materials – obtaining and characterization (alloys, polymers) (Major B., Sandu A. V., Abdullah M. M. A. B., Nabiałek M., Tański T., Zieliński A., Major B., Sandu A. V., Abdullah M. M. A. B., Nabiałek M., Tański T., Zieliński A.)
    •  
  • article: Modeling and parametric optimization of friction stir welding of aluminium alloy AA7068-T6 using response surface methodology and desirability function analysis (Bindu M. D., Tide P. S., Bhasi A. B., Ramachandran K. K., Bindu M. D., Tide P. S., Bhasi A. B., Ramachandran K. K.)
    •  
  • article: Model-based initial residual unbalance identification for rotating machines in one and two planes using an iterative inverse approach (Bastakoti S., Choudhury T., Viitala R., Kurvinen E., Sopanen J., Bastakoti S., Choudhury T., Viitala R., Kurvinen E., Sopanen J.)
    •  
  • article: Microscopic simulation of pedestrian traffic in urban environment under epidemic conditions (Paciorek M., Poklewski-Koziełł D., Racoń-Leja K., Byrski A., Gyurkovich M., Turek W., Paciorek M., Poklewski-Koziełł D., Racoń-Leja K., Byrski A., Gyurkovich M., Turek W.)
    •  
  • article: Mechanisms of plastic deformation in light high-manganese steel of TRIPLEX type (Sozańska-Jędrasik L., Borek W., Mazurkiewicz J., Sozańska-Jędrasik L., Borek W., Mazurkiewicz J.)
    •  
  • article: Mechanics of infinitesimal gyroscopes on helicoid-catenoid deformation family of minimal surfaces (Kovalchuk V., Gołubowska B., Mladenov I. M., Kovalchuk V., Gołubowska B., Mladenov I. M.)
    •  
  • article: Mechanical alloying of Mg-Zn-Ca-Er alloy (Hrapkowicz B., Lesz S., Kremzer M., Karolus M., Pakieła W., Hrapkowicz B., Lesz S., Kremzer M., Karolus M., Pakieła W.)
    •  
  • article: Machine modelling and simulations (Macko M., Rojek I., Sága M., Burczyński T., Mikołajewski D., Macko M., Rojek I., Sága M., Burczyński T., Mikołajewski D.)
    •  
  • article: Leveraging cloud environment flexibility to smoothen the transition to remote teaching during COVID-19 pandemic – a case study (Czekierda Ł., Malawski F., Straś R., Zieliński K., Zieliński S., Czekierda Ł., Malawski F., Straś R., Zieliński K., Zieliński S.)
    •  
  • article: Investigations of TiO₂, Ti/TiO₂, and Ti/TiO₂/Ti/TiO₂ coatings produced by ALD and PVD methods on Mg-(Li)-Al-RE alloys substrates (Staszuk M., Reimann Ł., Ściślak A., Jaworska J., Pawlyta M., Mikuszewski T., Kuc D., Tański T., Kříž A., Staszuk M., Reimann Ł., Ściślak A., Jaworska J., Pawlyta M., Mikuszewski T., Kuc D., Tański T., Kříž A.)
    •  
  • article: Intelligent system supporting technological process planning for machining and 3D printing (Rojek I., Mikołajewski D., Kotlarz P., Macko M., Kopowski J., Rojek I., Mikołajewski D., Kotlarz P., Macko M., Kopowski J.)
    •  
  • article: Integrated analytical-field design method of multi-disc magnetorheological clutches for automotive applications (Kluszczyński K., Pilch Z., Kluszczyński K., Pilch Z.)
    •  
  • article: Influence of mechanical alloying process on structural, mechanical and tribological behaviours of CNT reinforced aluminium composites – a statistical analysis (Manikandan P., Elayaperumal A., Franklin Issac R., Manikandan P., Elayaperumal A., Franklin Issac R.)
    •  
  • article: Influence of lightning current surge shape and peak value on grounding parameters (Łukaszewski A., Nogal Ł., Łukaszewski A., Nogal Ł.)
    •  
  • article: Improving LUT count of FPGA-based sequential blocks (Barkalov A., Titarenko L., Mazurkiewicz M., Krzywicki K., Barkalov A., Titarenko L., Mazurkiewicz M., Krzywicki K.)
    •  
  • article: Impact of gear rim narrowing angle on the temperature and sound pressure of Beveloid gear pair made of polymeric materials (Strojny P., Strojny P.)
    •  
  • article: Identification of longitudinal aerodynamic characteristics of a strake-wing micro aerial vehicle by using artificial neural networks (Rykaczewski D., Nowakowski M., Sibilski K., Wróblewski W., Garbowski M., Rykaczewski D., Nowakowski M., Sibilski K., Wróblewski W., Garbowski M.)
    •  
  • article: High temperature resistance of silicide-coated niobium (Szklarek R., Tański T., Mendala B., Staszuk M., Krzemiński Ł., Nuckowski P., Sobczak K., Szklarek R., Tański T., Mendala B., Staszuk M., Krzemiński Ł., Nuckowski P., Sobczak K.)
    •  
  • article: High quality repetitive control system for a grid-tied converter under distorted grid voltage conditions – design and implementation (Ufnalski B., Straś A., Grzesiak L. M., Ufnalski B., Straś A., Grzesiak L. M.)
    •  
  • article: High performance optical shutter design with scalable aperture (Pokryszka P., Wośko M., Kijaszek W., Paszkiewicz R., Pokryszka P., Wośko M., Kijaszek W., Paszkiewicz R.)
    •  
  • article: Fusion reaction study of halo system by quantum mechanical-based model for ⁶He+⁶⁴Zn, ⁸B+⁵⁸Ni and 8He+¹⁹⁷Au systems (Abd Madhi M. H., Majeed F. A., Abd Madhi M. H., Majeed F. A.)
    •  
  • article: Frequency of free vibration in systems with power-law restoring force (Grega I., Grega R., Homisin J., Grega I., Grega R., Homisin J.)
    •  
  • article: FLHex: a flapped-paddle hexapod for all-terrain amphibious locomotion (Burzynski P., Simha A., Kotta Ü., Pawluszewicz E., Sastry S., Burzynski P., Simha A., Kotta Ü., Pawluszewicz E., Sastry S.)
    •  
  • article: Experimental verification of H∞ control with examples of the movement of a wheeled robot (Hendzel Z., Penar P., Hendzel Z., Penar P.)
    •  
  • article: Experimental studies and modeling of four-wheeled mobile robot motion taking into account wheel slippage (Jaskot A., Posiadała B., Jaskot A., Posiadała B.)
    •  
  • article: Experimental modeling of the milling process of aluminum alloys used in the aerospace industry (Țîțu A. M., Pop A. B., Nabiałek M., Dragomir C. C., Sandu A. V., Țîțu A. M., Pop A. B., Nabiałek M., Dragomir C. C., Sandu A. V.)
    •  
  • article: Evaluation of gate drive circuit effect in cascode GaN-based applications (Tan Q. Y., Narayanan E. M. S., Tan Q. Y., Narayanan E. M. S.)
    •  
  • article: Elevated-temperature tensile deformation and fracture behavior of particle-reinforced PM 8009Al matrix composite (Chen S., Chen G., Gao P., Liu C., Wu A., Dong L., Huang Z., Ouyang C., Zhang H., Chen S., Chen G., Gao P., Liu C., Wu A., Dong L., Huang Z., Ouyang C., Zhang H.)
    •  
  • article: Effects of zeolites and hydrated lime on volumetrics and moisture resistance of foamed warm mix asphalt concrete (Chomicz-Kowalska A., Maciejewski K., Iwański M. M., Janus K., Chomicz-Kowalska A., Maciejewski K., Iwański M. M., Janus K.)
    •  
  • article: Effect of TiO₂ on the microstructure and phase composition of Al₂O₃ and Al₂O₃–TiO₂ APS sprayed coatings (Michalak M., Łatka L., Sokołowski P., T C. J. R., Ambroziak A., Michalak M., Łatka L., Sokołowski P., T C. J. R., Ambroziak A.)
    •  
  • article: Dynamics of rotating machinery (Ecker H., Nordmann R., Burczyński T., Szolc T., Ecker H., Nordmann R., Burczyński T., Szolc T.)
    •  
  • article: Dynamics of autonomous rock electromagnetic radiation measurement instrumentation (Mydlikowski R., Maniak K., Mydlikowski R., Maniak K.)
    •  
  • article: Double enveloping worm gear modelling using CAD environment (Połowniak P., Sobolak M., Marciniec A., Połowniak P., Sobolak M., Marciniec A.)
    •  
  • article: Determining horizontal curvature of railway track axis in mobile satellite measurements (Koc W., Wilk A., Specht C., Karwowski K., Skibicki J., Czaplewski K., Judek S., Chrostowski P., Szmagliński J., Dąbrowski P., Specht M., Grulkowski S., Licow R., Koc W., Wilk A., Specht C., Karwowski K., Skibicki J., Czaplewski K., Judek S., Chrostowski P., Szmagliński J., Dąbrowski P., Specht M., Grulkowski S., Licow R.)
    •  
  • article: Detection and classification of short-circuit faults on a transmission line using current signal (Coban M., Tezcan S. S., Coban M., Tezcan S. S.)
    •  
  • article: Design and analysis of the performance of multi-source interconnected electrical power system using resilience random variance reduction technique (Prakash Ayyappan B., Kanimozhi R., Prakash Ayyappan B., Kanimozhi R.)
    •  
  • article: Deep Learning based Tamil Parts of Speech (POS) Tagger (Anbukkarasi S., Varadhaganapathy S., Anbukkarasi S., Varadhaganapathy S.)
    •  
  • article: Deep adversarial neural network for specific emitter identification under varying frequency (Huang K., Yang J., Liu H., Hu P., Huang K., Yang J., Liu H., Hu P.)
    •  
  • article: Data irregularities in discretisation of test sets used for evaluation of classification systems: A case study on authorship attribution (Stańczyk U., Zielosko B., Stańczyk U., Zielosko B.)
    •  
  • article: Corrosion protection of 316L stainless steel by (PVDF/HA) composite coating using a spinning coating technique (Hussein A. A., Dawood N. M., Emad A.-k. A., Hussein A. A., Dawood N. M., Emad A.-k. A.)
    •  
  • article: Control system with a non-parametric predictive algorithm for a high-speed rotating machine with magnetic bearings (Kurnyta-Mazurek P., Szolc T., Henzel M., Falkowski K., Kurnyta-Mazurek P., Szolc T., Henzel M., Falkowski K.)
    •  
  • article: Contents
    •  
  • article: Contents
    •  
  • article: Contents
    •  
  • article: Contents
    •  
  • article: Contents
    •  
  • article: Computer Science vs. COVID-19 (Afelt A., Byrski A., Calo V., Krüger T., Madeyski L., Penczek W., Afelt A., Byrski A., Calo V., Krüger T., Madeyski L., Penczek W.)
    •  
  • article: Computational Intelligence in engineering practice (Osowski S., Sawicki B., Cichocki A., Osowski S., Sawicki B., Cichocki A.)
    •  
  • article: Comparison of Electrochemical Micromachining Performance using TOPSIS, VIKOR and GRA for Magnetic field and UV rays heated Electrolyte (Saravanan K. G., Thanigaivelan R., Soundarrajan M., Saravanan K. G., Thanigaivelan R., Soundarrajan M.)
    •  
  • article: Comparison of algorithms for satellite attitude determination using data from visual sensors (Narkiewicz J., Sochacki M., Rodacki A., Grabowski D., Narkiewicz J., Sochacki M., Rodacki A., Grabowski D.)
    •  
  • article: Comparative analyses of residential building efficiency for AC and DC distribution networks (Ahmad F., Dastgeer F., Gelani H. E., Khan S., Nasir M., Ahmad F., Dastgeer F., Gelani H. E., Khan S., Nasir M.)
    •  
  • article: Charge dynamics of partial discharges explored applying a chopped sequence (Florkowski M., Florkowski M.)
    •  
  • article: Characterization of oxide layers formed on 10CrMo9-10 steel operated for a long time in the power industry (Gwoździk M., Ullrich C., Schimpf C., Rafaja D., Kulesza S., Bramowicz M., Gwoździk M., Ullrich C., Schimpf C., Rafaja D., Kulesza S., Bramowicz M.)
    •  
  • article: Characterization of morphology and optical properties of SnO₂ nanowires prepared by electrospinning (Tański T., Smok W., Matysiak W., Tański T., Smok W., Matysiak W.)
    •  
  • article: Cavitation erosion of electrostatic spray polyester coatings with different surface finish (Szala M., Świetlicki A., Sofińska-Chmiel W., Szala M., Świetlicki A., Sofińska-Chmiel W.)
    •  
  • article: Bandwidth and Power Enhancement in the MEMS Based Piezoelectric Energy Harvester using Magnetic Tip Mass (Anand A., Pal S., Kundu S., Anand A., Pal S., Kundu S.)
    •  
  • article: Balancing of a linear elastic rotor-bearing system with arbitrarily distributed unbalance using the Numerical Assembly Technique (Quinz G., Prem M. S., Klanner M., Ellermann K., Quinz G., Prem M. S., Klanner M., Ellermann K.)
    •  
  • article: Axial stiffness for large-scale ball slewing rings with four-point contact (Hrcek S., Kohar R., Steininger J., Hrcek S., Kohar R., Steininger J.)
    •  
  • article: Automated test bench for research on electrostatic separation in plastic recycling application (Regulski R., Czarnecka-Komorowska D., Jędryczka C., Sędziak D., Rybarczyk D., Netter K., Barański M., Barczewski M., Regulski R., Czarnecka-Komorowska D., Jędryczka C., Sędziak D., Rybarczyk D., Netter K., Barański M., Barczewski M.)
    •  
  • article: Application of the Lagrange-Sylvester formula to computation of the solution to state equations of fractional linear systems (Kaczorek T., Kaczorek T.)
    •  
  • article: Application of non-contact ultrasonic method in air to study fiber-cement corrugated boards (Drelich R., Rosiak M., Pakula M., Drelich R., Rosiak M., Pakula M.)
    •  
  • article: Application of acoustic emission to the analysis of phase transformations in 27MnCrB5-2 steel tests during continuous cooling (Trafarski A., Łazarska M., Ranachowski Z., Trafarski A., Łazarska M., Ranachowski Z.)
    •  
  • article: Analyzing and improving tools for supporting fighting against COVID-19 based on prediction models and contact tracing (Gruda M., Kedziora M., Gruda M., Kedziora M.)
    •  
  • article: Analysis of the precipitation process of secondary phases after long-term ageing of the S304H steel (Zieliński A., Wersta R., Sroka M., Zieliński A., Wersta R., Sroka M.)
    •  
  • article: Analysis of the OCHN3MFA steel in terms of cutting forces and cutting material flank wear mechanisms in hard turning processes (Majerík J., Barényi I., Pokorný Z., Sedlák J., Neumann V., Dobrocký D., Jaroš A., Krbaťa M., Jambor J., Kusenda R., Sagan M., Procházka J., Majerík J., Barényi I., Pokorný Z., Sedlák J., Neumann V., Dobrocký D., Jaroš A., Krbaťa M., Jambor J., Kusenda R., Sagan M., Procházka J.)
    •  
  • article: Analysis of mass transfer in marine engine with prechamber combustion spark ignition system (Pielecha I., Pielecha I.)
    •  
  • article: Analysis of dynamical behaviour of full-floating disk thrust bearings (Nitzschke S., Ziese C., Woschke E., Nitzschke S., Ziese C., Woschke E.)
    •  
  • article: An enhanced performance evaluation of workflow computing and scheduling using hybrid classification approach in the cloud environment (Tharani P., Kalpana A. M., Tharani P., Kalpana A. M.)
    •  
  • article: An analytical-numerical method for calculating the stationary thermal field in electrical systems with elliptical cross-sections (Gołębiowski J., Zaręba M., Gołębiowski J., Zaręba M.)
    •  
  • article: Active vibration control of a gyroscopic rotor using experimental modal analysis (Jungblut J., Fischer C., Rinderknecht S., Jungblut J., Fischer C., Rinderknecht S.)
    •  
  • article: Accurate identification on individual similar communication emitters by using HVG-NTE feature (Li K., Ge W., Yang X., Xu Z., Li K., Ge W., Yang X., Xu Z.)
    •  
  • article: A survey of requirements for COVID-19 mitigation strategies (Jamroga W., Mestel D., Roenne P. B., Ryan P. Y. A., Skrobot M., Jamroga W., Mestel D., Roenne P. B., Ryan P. Y. A., Skrobot M.)
    •  
  • article: A reliability-operational analysis of a track-side CCTV cabinet taking into account interference (Paś J., Rosiński A., Białek K., Paś J., Rosiński A., Białek K.)
    •  
  • article: A novel source side power quality improved soft starting of three-phase induction motor using a symmetrical angle controller through pic microcontroller (Selvaperumal S., Krishnamoorthy N., Prabhakar G., Selvaperumal S., Krishnamoorthy N., Prabhakar G.)
    •  
  • article: A meshless method for subsonic stall flutter analysis of turbomachinery 3D blade cascade (Prasad C. S., Šnábl P., Pešek L., Prasad C. S., Šnábl P., Pešek L.)
    •  
  • article: 3D scan contour de-featuring for improved measurement accuracy – a case study for a small turbine guide vane component (Jamontt M., Pyrzanowski P., Jamontt M., Pyrzanowski P.)
    •  
  • issue: 1
    •  

open years