Full-text resources of PSJD and other databases are now available in the new Library of Science.
Visit https://bibliotekanauki.pl
Visit https://bibliotekanauki.pl
Publisher
Year
Volume
Issue
2
Identifiers
Cover
Volume contents
-
2
-
article: Analysis of Selected Properties 100CrMnSi6-4 Surface Layer after Laser Micro-Smelting (Napadłek W.)
-
article: Effect of Wetting Agent and Carbide Volume Fraction on the Wear Response of Aluminum Matrix Composites Reinforced by WC Nanoparticles and Aluminide Particles (Lekatou A., Gkikas N., Karantzalis A. E., Kaptay G., Gacsi Z., Baumli P., Simon A.)
-
article: Effect of Hydrostatic Pressure on Thermodynamic Properties of NiTi Shape Memory Alloy (Tatar C., Yildirim Z., Kaygili O.)
-
article: Diode Laser Surface Alloying of Armor Steel with Tungsten Carbide (Kondracki M., Górka J., Gołombek K., Janicki D., Kwaśny W., Żuk M.)
-
article: Disruption of an Alumina Layer During Sintering of Aluminium in Nitrogen (Pieczonka T.)
-
article: Decoring Behaviour of Chosen Moulding Materials with Alkali Silicate Based Inorganic Binders (Conev M., Hrubovčáková M., Vasková I., Hajdúch P.)
-
article: Effect of Laser Preheating AISI 4140 Specimens for Micro-Forging (Jung C., Lee M. G., Jeon Y.)
-
article: Collection of Industrial Oil Using Nanoparticles and Porous Powders of Silica (Cho Y.-S., Moon J.-W.)
-
article: Effect of Strut Thickness on Room and High Temperature Compressive Properties of Block-Type Ni-Cr-Al Powder Porous Metals (Lee K.-A., Kang B.-H., Park M.-H.)
-
article: Control of Natural Zeolite Properties by Mechanical Activation in Stirred Media Mill (Bohács K., Faitli J., Bokányi L., Mucsi G.)
-
article: Application of High Flow Rate Gas in the Process of Argon Blowing Trough Steel (Merder T., Pieprzyca J., Warzecha M., Warzecha P.)
-
article: Effect of Heat Treatment on the Microstructure and Tensile Deformation Behavior of Oxide Dispersion Strengthened Alloys Manufactured by Complex Milling Process (Kim J.-H., Lee K.-A., Kim Y.-K., Gwon J.-H.)
-
article: Compressive Deformation Behavior of Thick Micro-Alloyed HSLA Steel Plates at Elevated Temperatures (Lee J.-H., Lee K., Kim D.-O.)
-
article: An Evaluation of the Stability of Mould Flux Properties in the Process of Continuous Steel Casting (Falkus J.)
-
article: Effects of Grain Boundary Morphologies on Stress Corrosion Cracking of Alloy 600 (Kim H. P., Choi M. J., Kim S. W., Kim D. J., Lim Y. S., Hwang S. S.)
-
article: Challenges of Using Elemental Nickel and Titanium Powders for the Fabrication of Monolithic NiTi Parts (Farvizi M.)
-
article: A Study on Changes in Thickness of STS304 Material in the Progressive Drawing Process (Lee C. K., Kim Y. C.)
-
article: An Analysis of the Quality of the Thick-Walled S355J2+N Steel Joint Welded by the Mag Method (Krawczyk R.)
-
article: Effect of Electroless Ni–P Plating on the Bonding Strength of Bi–Te-Based Thermoelectric Modules (Son I., Kim S. S., Kim K. T.)
-
article: Double Fillet Welding of Carbon Steel T-Joint by Double Channel Shielding Gas Metal Arc Welding Method Using Metal Cored Wire (Mert T., Gultekin N., Karaaslan A.)
-
article: A Fatigue Fracture Study on TDCB Aluminum Foam Specimen of Type Mode III Bonded with Adhesive (Lee J. H., Cho J. U.)
-
article: Effect of Heat Treatment on Microstructure and Impact Toughness of Ti-6Al-4V Manufactured by Selective Laser Melting Process (Park S.-H., Lee K.-A., Kim Y.-K., Yu J.-H., Kim M.-C.)
-
article: Characterization of Cu and Ni Nano-Fluids Synthesized by Pulsed Wire Evaporation Method (Kim H.-S., Hong S.-J., Yilmaz F., Dharmaiah P., Lee D.-J., Lee T.-H.)
-
article: Copper-Carbon Nanoforms Composites – Processing, Microstructure and Thermal Properties (Gładki A., Wójcik-Grzybek D., Strojny-Nędza A., Pietrzak K., Frydman K., Wejrzanowski T.)
-
article: Combined Effects of Copper and Tin at Intermediate Level of Manganese on the Structure and Properties of As-Cast Nodular Graphite Cast Iron (Lacaze J., Sertucha J., Larrañaga P., Suárez R.)
-
article: Digital Material Representation Model of Porous Microstructure Based on 3D Reconstruction Algorithm (Madej Ł., Mojżeszko M., Chrapoński J., Roskosz S., Cwajna J.)
-
article: Effect of the Austempering Process on the Microstructure and Mechanical Properties of 27MnCrB5-2 Steel (Morri A., Ceschini L., Pellizzari M., Menapace C., Vettore F., Veneri E.)
-
article: Carbon Co-Deposition During Gas Reduction of Water-Atomized Fe-Cr-Mo Powder (Ali B., Kim T. S., Choi S. H., Seo S. J., Maeng D. Y., Lee C. G., Park K. T.)
-
article: Correlation Between Pin Misalignment and Crack Length in THT Solder Joints (Molnar A., Benke M., Gacsi Z.)
-
article: Effect of Acid Dissolution Conditions on Recovery of Valuable Metals from Used Plasma Display Panel Scrap (Kim C.-M., Hong S.-J., Dharmaiah P., Kim H.-S., Koo J.-M., Yoon J.-S., Hong H.-S.)
-
article: Calorimetric Measurements of Ga-Li System by Direct Reaction Method (Dębski A.)
-
article: Corrosion Resistance of Some Stainless Steels in Chloride Solutions (Kasprzyk D., Stypuła B.)
-
article: Analysis of Thermal Stability of CrCN Coatings Deposited on Nitrided Substrates Using Modulated Temperature Thermodilatometry (Mydłowska K., Myśliński P., Szparaga Ł., Ratajski J., Gilewicz A., Jędrzejewski R.)
-
article: A Study on Propagation Property of Fatigue Crack at Composite with Another Material (Choi K. K., Cho J. U.)
-
article: Development of Crack Detection Method with 2 Dimensionally Generated 3 Dimensionally Reconstructed Images in THT Solder Joints (Koncz-Horváth D., Gergely G., Weltsch Z., Gácsi Z.)
-
article: Effect of Ultrasonication Dispersion Technique on Sintering Properties of CNT Reinforced Al-Zn-Mg-Cu Powder (Rudianto H., Edtmaier C., Dlouhy I., Soukal F.)
-
article: Brazing of Titanium with Aluminium Alloys (Winiowski A., Majewski D.)
-
article: Collosion and Absorption Behaviors of Inclusions on Refractory (Ding-Guo Z., Ming G., Xin L., Shu-Huan W.)
-
article: Analysis of Thermal Stresses and Strains Developing during the Heat Treatment of Windmill Shaft (Cebo-Rudnicka A., Malinowski Z., Telejko T.)
-
article: Effect of Grinding Fineness of Fly Ash on the Properties of Geopolymer Foam (Szabó R., Gombkötő I., Svéda M., Mucsi G.)
-
article: Crystallization behavior of Zr62Al8Ni13Cu17 Metallic Glass (Jo M. S., Lee J. K.)
-
article: Effect of Local Strain Distribution of Cold-Rolled Alloy 690 on Primary Water Stress Corrosion Crack Growth Behavior (Kim S.-W., Ahn T.-Y., Lim Y.-S., Hwang S.-S.)
-
article: Effect of Surfactant Addition on Bi2Te3 Nanostructures Synthesized by Hydrothermal Method (Dharmaiah P., Hong S.-J., Madavali B., Lee C. H.)
-
article: Effect of Mechanical Activation on the In Situ Formation of TiB2 Particulates in the Powder Mixture of TiH2 and FeB (Huynh X.-K., Kim J. S., Kim B.-W.)
-
article: Effect of Fe Content on the Microstructure and Mechanical Properties of Ti-Al-Mo-V-Cr-Fe Alloys (Bae K. C., Oak J. J., Kim Y. H., Park Y. H.)
-
article: A Simplified Approach for the Hydro-Forming Process of Bi-Metallic Composite Pipe (Zhao Y., Gao H., Hu J., Zheng M., Teng H., Tian Z.)
-
article: Advances in Powder Metallurgy Soft Magnetic Composite Materials (Bureš R., Strečková M., Fáberová M., Kollár P., Füzer J.)
-
article: Effect of Hafnium and Zirconium to Glass Forming Ability, Thermal Stability, Plasticity Deformation and Crystallization of Ni-Free Pentabasic Ti-Based Bulk Metallic Glasses (Oak J. J., Kim Y. H., Bae K. C., Park Y. H.)
-
article: Effect of Ga2O3 Nanoparticles Dispersion on Microstructure and Thermoelectric Properties of p-Type BiSbTe Based Alloys (Kim E.-B., Hong S.-J., Koo J.-M.)
-
article: Effect of Alloying Elements on Plastic Workability and Corrosion Behavior of Ti-X (X = 6 Co, 8 Cr, 4 Fe, 6 Mn, 10 Mo, and 36 Nb) Binary Alloys (Zhao Z., Lee K.)
-
article: Synthesis and Characterization of Black CoFe2O4 Pigments Using MOOH (M = Fe and Co) Nanorod (Yu R., Yun J., Kim Y.)
-
article: Influence of Material Coating on the Heat Transfer in a Layered Cu-SiC-Cu Systems (Strojny-Nędza A., Pietrzak K., Chmielewski M., Teodorczyk M., Basista M., Węglewski W.)
-
article: Formalization of Technological Knowledge in the Field of Metallurgy using Document Classification Tools Supported with Semantic Techniques (Regulski K.)
-
article: Impact Characteristic According to the Structure of Crash Box at the Vehicle (Min B. S., Cho J. U.)
-
article: Improved Long-Term Stability of Transparent Conducting Electrodes Based on Double-Laminated Electrosprayed Antimony Tin Oxides and Ag Nanowires (Koo B.-R., Bae J.-W., Ahn H.-J.)
-
article: Microstructural Aspects of Bifocal Laser Welding of Trip Steels (Grajcar A., Morawiec M., Różański M., Grzegorczyk B., Stano S.)
-
article: Investigations of Temperatures of Phase Transformations of Low-Alloyed Reinforcing Steel within the Heat Treatment Temperature Range (Kargul T.)
-
article: Thermal Diffusion of 57Co into Rh Foil for Preparing Mössbauer Source (Uhm Y. R., Kim J. J., Choi S. M., Son K. J.)
-
article: Using the Principles of Image Analysis in the Assessment of the Proportion of Retained Austenite in the Case Hardened Layers (Váňová P., Sojka J., Kulová T., Jokešová K., Purtátor P., Spinu A.)
-
article: The Influence of Extrusion Process on the Microstructure and Mechanical Properties of Magnesium Alloys (Tomaszewska A., Bednarczyk I., Kuc D., Mrugała A.)
-
article: The Mechanism of Redox Reaction between Palladium(II) Complex Ions and Potassium Formate in Acidic Aqueous Solution (Wojnicki M., Podborska A.)
-
article: Rapid Synthesis of Gold Nano-Particles Using Pulse Waved Potential in a Non-Aqueous Electrolyte (Jang J. G., Lee J.-O., Lee C. K.)
-
article: Estimation of the Effect of Production Parameters on Mechanical Properties of Sintered Steels using ANOVA (Sułowski M., Czarski A., Matusiewicz P., Jordan A.)
-
article: Self-Consolidation Mechanism of Ti5Si3 Compact Obtained by Electro-Discharge-Sintering Directly from Physically Blended Ti-37.5 at.% Si Powder Mixture (Chang S. Y., Cheon Y. W., Yoon Y. H., Kim Y. H., Kim J. Y., Lee Y. K., Lee W. H.)
-
article: Studies on the Corrosion Resistance of Laser-Welded Inconel 600 and Inconel 625 Nickel-Based Superalloys (Łyczkowska K., Michalska J.)
-
article: Hardness and Microstructure of Mixed Al-CNF Powder Extrusion (Kim D.-H., Kim T.-J., Lim S.-G.)
-
article: Physical Modeling of Plastic Working Conditions for Rods of 7xxx Series Aluminum Alloys (Dyja H., Laber K., Bajor T., Tussupkaliyeva E.)
-
article: Surface Modification of Self-Consolidated Microporous Ti Implant Compacts Fabricated by Electro-Discharge-Sintering in Air (Jo Y. J., Yoon Y. H., Kim Y. H., Chang S. Y., Kim J. Y., Lee Y. K., Van Tyne C. J., Lee W. H.)
-
article: Sintering and Microstructures of SUS 316L Powder Produced by 3D Printing Process (Kim W. J., Kim J.-C., Nguyen M.-T., Nguyen H.-H., Kim H. Y., Park H. S.)
-
article: Numerical and Experimental Study of Producing Two-Step Flanges by Extrusion with a Movable Sleeve (Gontarz A., Winiarski G.)
-
article: Investigation of Multicomponent Lead-Free Solders (Gyenes A., Benke M., Teglas N., Nagy E., Gacsi Z.)
-
article: Recent Developments on Discontinuous Precipitation (Zięba P.)
-
article: Study of Composite Insulator Sheds Subjected to Wheel Test (Mackiewicz M., Wańkowicz J., Ranachowski Z., Ranachowski P., Mikulski J. L., Kucharski S.)
-
article: Transient Liquid Phase Behavior of Sn-Coated Cu Particles and Chip Bonding using Paste Containing the Particles (Lee J.-H., Hwang J. H.)
-
article: Electrical and Thermal Properties of Na1–xLixNbO3 (x = 0.08, 0.1 and 0.2) Ceramics Near the Morphotropic Phase Boundary Region (Konieczny K., Czaja P.)
-
article: Photosensitization of TiO2 P25 with CdS Nanoparticles for Photocatalytic Applications (Trenczek-Zając A., Banaś J., Świerczek K., Zazakowny K., Radecka M.)
-
article: Magnetic Properties of (Nia-Znb)X Cu1-X Ferrite Nanoparticle Fabricated by Sol-Gel Process (Yang S., -Gon K. J.)
-
article: The Impact of the Thickness of the Ceramic Shell Mould on the (γ + γ′) Eutectic in the IN713C Superalloy Airfoil Blade Casting (Pietraszek J., Szczotok A., Nawrocki J.)
-
article: Investigation of the Microstructure and Thermoelectric Properties of P-Type BiSbTe Alloys by Usage of Different Revolutions Per Minute (RPM) During Mechanical Milling (Yoon S.-M., Madavali B., Hong S.-J., Yoon Y.-N.)
-
article: Understanding the Oxide Dispersion Behavior of Yttria in Metal Matrix of MA956 Alloy through High-Energy Milling and Hot Press Sintering (Swain B., Ahn B., Kim G.-H., Han D., Kong M.-S.)
-
article: Microstructure Evolution of Ni-Based ODS Superalloy Powders During Horizontal Rotary Ball Milling (Lee H.-E., Kim Y. S., Park J. K., Oh S.-T.)
-
article: Study on Effects of Mold Temperature on the Injection Molded Article (Han J.-H., Kim Y.-C.)
-
article: Structural Properties and Mechanical Behavior of the 2 Step-Reinforced Al-Si/SiCp Metal Matrix Composite by Titanium-Fiber (Oak J. J., Lee Y. C., Park Y. H.)
-
article: Oxidation Behavior of Steel With Cr Content and Water Flow Rate (Kim D.-J., Kim K. M., Shin J. H., Cheong Y. M., Lee E. H., Lee G. G., Kim S. W., Kim H. P., Choi M. J., Lim Y. S., Hwang S. S.)
-
article: Numerical and Physical Parametric Analysis of a SEN with Flow Conditioners in Slab Continuous Casting Mold (Gonzalez-Trejo J., Real-Ramirez C. A., Miranda-Tello R., Rivera-Perez F., Cervantes-de-la-Torre F.)
-
article: Fabrication and Characterization of Ni-CNT Composites by Electrical Explosion of Wire in Different Liquids (Thuyet-Nguyen M., Kim J.-C., Kim W. J., null n.)
-
article: Influence of Cooling Conditions on a Slab’s Chill Zone Formation During Continuous Casting of Steel (Drożdż P.)
-
article: Preparation and Properties of Ti-Y2O3 Composites for Implant Applications (Adamek G., Jakubowicz J., Dewidar M.)
-
article: Microstructure and Soft Magnetic Properties of Fe-Zr-(Pt)-Nb-Cu-B Amorphous Alloys (Gondro J., Błoch K., Nabiałek M., Walters S.)
-
article: Microstructure and Magnetic Properties of NdFeB Sintered Magnets Diffusion-Treated with Cu/Al Mixed Dyco Alloy-Powder (Lee M.-W., Bae K.-H., Lee S.-R., Kim H.-J., Jang T.-S.)
-
article: The Influence of Thermal Expansion of Unbonded Foundry Sands on the Deformation of Resin Bonded Cores (Svidró J., Diószegi A., Tóth L., Svidró J. T.)
-
article: Fabrication and Crystal Structure of Sol-Gel Deposited BST Thin Films with Compositional Gradient (Czekaj D., Lisińska-Czekaj A., Plewa J.)
-
article: Investigation of La3+ Doping Effect on Piezoelectric Coefficients of BLT Ceramics (Kozielski L., Wodecka-Duś B., Adamczyk M., Radoszewska D., Bochenek D., Erhart J., Pawełczyk M.)
-
article: Modelling of the Working Process of Vibratory Conveyors Applied in the Metallurgical Industry (Bednarski Ł., Michalczyk J.)
-
article: Theoretical and Experimental Analysis of Formability of Explosive Welded Mg/Al Bimetallic Bars (Mróz S., Szota P., Stefanik A., Bajor T.)
-
article: Recycling of Gallium from End-of-Life Light Emitting Diodes (Nagy S., Bokányi L., Gombkötő I., Magyar T.)
-
article: Thermal Conductivity and Microstructure of Copper Coated Graphite Composite by Spark Plasma Sintering Process (Park S. H., Kim D. B., Lee R. G., Son I. J.)
-
article: The Application of Acoustic Emission and Artificial Neural Networks in an Analysis of Kinetics in the Phase Transformation of Tool Steel During Austempering (Łazarska M., Ranachowski Z., Ranachowski P., Woźniak T. Z., Trafarski A.)
-
article: Spontaneous Formation of Titanium Nitride on the Surface of a Ti Rod Induced by Electro-Discharge-Heat-Treatment in an N2 Atmosphere (Lee W. H., Yoon Y. H., Kim Y. H., Lee Y. K., Kim J. Y., Chang S. Y.)
-
article: The Numerical and Experimental Analysis of Ballizing Process of Steel Tubes (Dyl T.)
-
article: Influence of Substituted Elements on Reflection Loss of Ba-Ferrite Nanoparticle (Yang S., Jeong K. P., Park S.-Y., -Gon K. J.)
-
article: Metallographic Study of the Casting Made from CMSX-6 SC Nickel-Based Superalloy (Szczotok A.)
-
article: Fabrication and Shape Memory Characteristics of Highly Porous Ti-Nb-Mo Biomaterials (Kim Y.-W., Mukarati T. W.)
-
article: Synthesis and Characterization of Antimony Telluride for Thermoelectric and Optoelectronic Applications (Pietrzak K., Chmielewski M., Zybała R., Mars K., Mikuła A., Bogusławski J., Soboń G., Sotor J., Schmidt M., Kaszyca K., Ciupiński L.)
-
article: Identification of the Heat Transfer Coefficient at the Charge Surface Heated on the Chamber Furnace (Gołdasz A., Malinowski Z.)
-
article: The Influence of Material Model of the Polyurethane Elastomer on the FEM Calculations Quality for the Various Modes of Loading (Kut S., Ryzińska G., Niedziałek B.)
-
article: TEM Microstructure and Chemical Composition of Transition Zone Between Steel Tube and An Inconel 625 Weld Overlay Coating Produced by CMT Method (Blicharski M., Rozmus-Górnikowska M.)
-
article: Investigation of Stress Corrosion Cracking in Magnesium Alloys by Quantitative Fractography Methods (Chmiela B., Sozańska M., Mościcki A.)
-
article: High-Temperature Oxidation Behavior and Kinetics of Forged 12Cr-MoVW Steel (Kim Y. H., Oak J.-J., Bae K.-C., Lee W. J., Park Y. H.)
-
article: Investigation of the Ultrafine-Grained Structure Formation under Different Strain Rates (Kováčová A., Lityńska-Dobrzyńska L., Dutkiewicz J., Kvačkaj T., Bidulský R., Bidulská J., Kočiško R.)
-
article: The Effects of Finish Rolling Temperature and Niobium Microalloying on the Microstructure and Properties of a Direct Quenched High-Strength Steel (Kaijalainen A., Vähäkuopus N., Somani M., Mehtonen S., Porter D., Kömi J.)
-
article: Improved Mechanical Properties of Al-Si Alloys by Adding an Extrusion Process to Conventional Processing Method (Han J. Y., Koo J. M., Femi O. E., Kilicaslan F., Jeong C. U., Baeg C. H., Hong S. J.)
-
article: Microstructural and Mechanical Characterization of Electron Beam Welded Joints of High Strength S960QL and Weldox 1300 Steel Grades (Dymek S., Błacha S., Węglowski M. S., Kopyściański M.)
-
article: Selected Problems of the Microstructure Evolution During Microalloyed Steel Wire Rod Production Process (Kwiecień M., Graca P., Muszka K., Majta J.)
-
article: Improvement of Microwave Absorbance of Polymer Composites of W-Type Hexaferrite Powders by Attachment of Frequency Selective Surface (Cho H.-S., Kim S.-S.)
-
article: High Temperature Oxidation Property of SiC Coating Layer Fabricated by Aerosol Deposition Process (Kim S.-H., Ham G.-S., Lee K.-A., Park J.-Y.)
-
article: Structural, Mechanical and Thermodynamic Properties under Pressure Effect of Rubidium Telluride: First Principle Calculations (Bidai K., Ameri M., Ameri I., Bensaid D., Slamani A., Zaoui A., Al-Douri Y.)
-
article: Self-Consolidation and Surface Modification of Mechanical Alloyed Ti-25.0 at.% Al Powder Mixture by Using an Electro-Discharge Technique (Chang S. Y., Jang H. S., Yoon Y. H., Kim Y. H., Kim J. Y., Lee Y. K., Lee W. H.)
-
article: Microstructure Characterization of SiC Reinforced Aluminium and Al4Cu Alloy Matrix Composites (Leszczyńska-Madej B., Wąsik A., Madej M.)
-
article: Fabrication of AZ31/CNT Surface Nano-Composite by Double-Pass Friction Stir Processing (Lee S.-M., Kim J.-Y., Hwang J.-W., Kim H.-Y., Byeon J.-W., Jung W.-S.)
-
article: Thermal Stability of AA1050 Aluminum Alloy after Equal Channel Angular Pressing (Koprowski P., Sztwiertnia K., Bogucki R., Bieda M., Kawałko J.)
-
article: The Influence of Synthesis Temperature on Manufacturing and Properties of SrSi2O2N2:Eu2+ Powders (Pawlik T., Sopicka-Lizer M., Michalik D., Barzowska J., Szczodrowski K., Lesniewski T., Grinberg M.)
-
article: Microstructural and Mechanical Study of Inconel 625 – Tungsten Carbide Composite Coatings Obtained by Powder Laser Cladding (Huebner J., Kusiński J., Rutkowski P., Kata D.)
-
article: The Effect of Additive Element on the Properties of Mechanically Alloyed Fe-Y2O3 Alloys (Kim T. K., Ahn J.-H., Ahn J.)
-
article: Statistical Assessment of the Microstructure of Barite Aggregate from Different Deposits Using X-Ray Microtomography and Optical Microscopy (Ranachowski Z., Ranachowski P., Żołek N., Jóźwiak-Niedźwiedzka D., Kudela S., Dvorak T.)
-
article: Investigations of Interface Properties in Copper-Silicon Carbide Composites (Nosewicz S., Strojny-Nędza A., Pietrzak K., Chmielewski M., Jarząbek D.)
-
article: The Influence of the Angle of the Working Part of the Die on the High Speed Drawing Process of Low Carbon Steel Wires (Suliga M., Michalczyk J., Wartacz R.)
-
article: Preparation of Submicroscale Ag-Coated Cu Particles by Multi-Step Addition of Ag Plating Solution and Antioxidation Properties for Different Ag Shell Thicknesses (Choi E. B., Lee J.-H.)
-
article: Synthesis of Single Crystalline Titanium Oxide and Sodium Titanate Nanorods Via Salt-Assisted Ultrasonic Spray Pyrolysis (Hwangbo Y., Yoo J.-H., Lee Y.-I.)
-
article: Synthesis and Characterization of Si Oxide Coated Nano Ceria by Hydrolysis, and Hydrothermal Treatment at Low Temperature (Kong M., Kim H. W.)
-
article: Fabrication of High-Strength Gray Cast Iron Using Permanent Magnet Scrap (Park S.-Y., Kim J. H., Seo S. J., On J. S., Lim K. M.)
-
article: Reaction Kinetics and Morphological Study of TiNb2O7 Synthesized by Solid-State Reaction (Choi S. H., Kim T. S., Ali B., Choi K. S., Hyun S. K., Sim J. J., Choi W. J., Joo W., Lim J. H., Lee T. H., Park K. T.)
-
article: Nickel in Compacted Graphite Iron (Gumienny G., Szymczak T., Kurowska B., Gawroński J.)
-
article: Increasing the Surface Hardness of Cast Iron by Electrodeposition of Borides in Molten Salts (Al-Azzawi A. H., Sytchev J., Baumli P.)
-
article: The Multicomponent PZT-type Ceramics for Micromechatronic Applications (Bochenek D., Skulski R., Niemiec P., Wodecka-Duś B., Adamczyk M., Zachariasz R., Machnik Z.)
-
article: Quantitative Evaluation of the Microstructure and Mechanical Properties of Hot Rolled 23MnB4 Steel Grade for Cold Upsetting (Kuc D., Bednarczyk I., Szala J.)
-
article: Mechanical and Microstructural Response of Near Beta Ti Alloys to Hot Tensile Testing (Abbasi S. M., Momeni A., Daraee M., Akhondzadeh A., Mirsaeed S. G.)
-
article: Solvent Extraction of Co, Ni and Mn from NCM Sulfate Leaching Solution of Li(NCM)O2 Secondary Battery Scraps (Hong H. S., Kim D. W., Choi H. L., Ryu S.-S.)
-
article: Fabrication of Cu-Based SiC Composites by Spark Plasma Sintering of Cu-Nitrate Coated SiC Powders (Jeong Y.-K., Kim Y. S., Oh S.-T.)
-
article: Torsion Property of the Structure Bonded Aluminum Foam Due to Impact (Hwang G. W., Cho J. U.)
-
article: The Effect of the Use of Technological Lubricants Based on Vegetable Oils on the Process of Titanium Sheet Metal Forming (Więckowski W., Dyja K.)
-
article: Enhancement of Life Time of the Dimensionally Stable Anode for Copper Electroplating Applications (Son S. H., Park S. C., Lee M. S.)
-
article: Whisker-Like Formations in Sn-3.0Ag-Pb Alloys (Koncz-Horváth D., Gergely G., Gácsi Z.)
-
article: Optimization of Roll Bonding by Hot Rolling in Experimental and Industrial Use (Szabó G.)
-
article: Microstructure and Mechanical Properties of Al-3 Vol% CNT Nanocomposites Processed by High-Pressure Torsion (Asgharzadeh H., Kim H. S.)
-
article: Using an Interdigital Micromixer for Separation of In3+ from Zinc Hydrometallurgical Process with D2EHPA as an Extractant (Li C., Jiang F., Ju S., Peng J., Wei Y., Zhang L.)
-
article: Fabrication of a Spherical Titanium Powder by Combined Combustion Synthesis and DC Plasma Treatment (Choi S. H., Kim T. S., Ali B., Hyun S. K., Sim J. J., Choi W. J., Joo W., Lim J. H., Lee Y. J., Park K. T.)
-
article: Energy-Based Yield Criteria for Orthotropic Materials, Exhibiting Strength-Differential Effect. Specification for Sheets under Plane Stress State (Szeptyński P.)
-
article: Metallographic Study and Repeatability Analysis of γ' Phase Precipitates in Cored, Thin-Walled Castings Made from IN713C Superalloy (Pietraszek J., Szczotok A., Radek N.)
-
article: Examination of Clustering in Eutectic Microstrcture (Bortnyik K., Barkóczy P.)
-
article: Numerical Modelling of Micro-Stresses in Carbonised Austenitic Cast Steel under Rapid Cooling Conditions (Tuleja J., Zatorski Z.)
-
article: Analysis of Selected Properties 100CrMnSi6-4 Surface Layer after Laser Micro-Smelting (Napadłek W.)
open years
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.