Acta Physica Polonica A - Volume 125, Issue 2 (2014) - PSJD - Yadda

Publisher

Journal

Acta Physica Polonica A

Year

2014

Volume

125

Issue

2

Identifiers

Cover

Volume contents

2
- article: Proceedings of the 3rd International Congress on Advances in Applied Physics and Materials Science (APMAS2013). Preface., p. 167-169
- article: On the Validity of Diffusional Model in Determination of Electric Transport Parameters of Semiconductor Compound (Dussan A., Mesa F.), p. 171-173
- article: Density of States in Thin Boron-Doped Microcrystalline Silicon Films Estimated from the Thermally Stimulated Conductivity Method (Dussan A., Schmidt J., Koropecki R.), p. 174-176
- article: Structural Alterations in Mechanically Activated Malachite (Tunç T., Yıldız K.), p. 177-179
- article: Structured Analysis of Stainless Steel 316L Material of Micro-Forceps Used in Vitrectomy Surgery by Biomechanics Modeling (Karaçalı Ö., Çetiner D.), p. 180-182
- article: Finite Element Analysis of Pallet-Nail Materials Used in Pallet Joint Design for Material Handling Works (Karaçalı Ö., Taner Ulguel A.), p. 183-185
- article: A Research on Structured Analysis of Biomaterial of Dental Implant in Computer Aided Biomechanical Engineering Modelling (Karaçalı Ö.), p. 186-188
- article: Reciprocating Wear Behavior of Ductile Cast Iron Modified by Pulse Plasma Technology (Ayday A., Durman M.), p. 189-191
- article: Non-Linear Stability of Conical Shell Structures Including a Functionally Graded Core (Sofiyev A., Ay Z., Najafov A., Mammadov Z., Schnack E.), p. 192-194
- article: Nonlinear Optical Rectification and Second Harmonic Generation in 2D Quantum Rings under Electric Field and Magnetic Fields (Morales A., Mora-Ramos M., Duque C.), p. 195-197
- article: Intense Laser Field Effects on the Shallow-Donor Impurity States in Rectangular-Shaped Quantum Well Wires (Duque C., Mora-Ramos M., Yesilgul U., Ungan F., Sakiroglu S., Kasapoglu E., Sari H., Sökmen I.), p. 198-201
- article: Optical Responses in Asymmetric Inverse Parabolic Quantum Wells: Effects of Laser Fields and Hydrostatic Pressure (Mora-Ramos M., Morales A., Duque C.), p. 202-204
- article: Simple Microwave Technique for Non-Destructive Testing of Electrical Properties of Magnetized Materials (Laurinavičius L.), p. 205-207
- article: The Response of the Heat Affected Zone to Natural Aging in Friction Welded Al-Mg-Si-T6 Alloy (Abudaia F., Marwan K.), p. 208-210
- article: Crack Detection Using Fluxgate Magnetic Field Sensor (Izgi T., Goktepe M., Bayri N., Kolat V., Atalay S.), p. 211-213
- article: Production of LaCaMnO_3 Composite by Ball Milling (Gencer H., Cengiz N., Kolat V., Izgi T., Atalay S.), p. 214-216
- article: Field Induced Unusual Magnetic Behavior at Low Temperature in Pr_{0.67}Ca_{0.33}MnO_3 (Pektas M., Gencer H., Izgi T., Kolat V., Atalay S.), p. 217-219
- article: Double-Donor Energy Structure in Concentric Quantum Rings under Magnetic Field and Hydrostatic Pressure (Fulla M., Marín J., Londoño D., Duque C., Mora-Ramos M.), p. 220-223
- article: The Formation of Free Standing NiO Nanostructures on Nickel Foam for Supercapacitors (Atalay F., Aydogmus E., Yigit H., Avcu D., Kaya H., Atalay S.), p. 224-226
- article: Magnetoimpedance Effects in Electrodeposited NiFe Nanowire Array (Aydogmus E., Kaya H., Atalay F., Atalay S., Avcu D.), p. 227-229
- article: Magnetoresistance of Electrochemically Produced NiFe and CoNiFe Nanowires (Avcu D., Atalay F., Aydogmus E., Kaya H., Atalay S.), p. 230-231
- article: Effects of Microstructural Transformation in TBCs Consisting of NiCrAlY Metallic Bond Coat and YSZ Ceramic Top Coat after Oxidation at 900°C (Parlakyigit A., Karaoglanli A.), p. 232-234
- article: The Fabrication of NiO Microtubes Using Bacillus subtilis/Bacteria (Atalay F., Asma D., Aydogmus E., Turanci H., Kaya H.), p. 235-237
- article: Shear Bond Strength Comparison between Conventional Dental Nano Zirconia Combinations and New Functionally Graded Nano Zirconia Combinations after Thermal-Mechanical Cycling (Sun T., Lai R., Liu R., Shao L.), p. 238-240
- article: D_2^+ Molecular Complex in Ring-Like Nanostructures: Hydrostatic Pressure and Electromagnetic Field Effects (Fulla M., Marín J., Gutiérrez W., Duque C., Mora-Ramos M.), p. 241-244
- article: Impurity-Related Nonlinear Optical Absorption in Delta-Doped Quantum Rings (Restrepo R., Martínez-Orozco J., Barseghyan M., Mora-Ramos M., Duque C.), p. 245-247
- article: The Antibacterial Activities of Ag/Nano-TiO_2 Modified Silicone Elastomer (Wang L., Sun T., Zhou S., Shao L.), p. 248-250
- article: Wear Properties of the Surface Alloyed AISI 1020 Steel with Vanadium and Boron by TIG Welding Technique (Abakay E., Sen S., Sen U.), p. 251-253
- article: Tribological Behavior of Copper/MWCNT Nanocomposites Produced by Pulse Electrodeposition (Gül H., Uysal M., Akbulut H., Alp A.), p. 254-256
- article: The Spark Plasma Sintering of Silicon Carbide Ceramics Using Alumina (Unlu M., Goller G., Yucel O., Sahin F.), p. 257-259
- article: Spark Plasma Sintering of Boron Carbide Ceramics Using Different Sample Geometries and Dimensions (Cengiz M., Yavas B., Celik Y., Goller G., Yucel O., Sahin F.), p. 260-262
- article: The Effects of Accelerating Admixture on the Mechanical Properties of Boric Acid Added Mortars (Davraz M., Kılınçarslan Ş., Pehlivanoğlu E.), p. 263-267
- article: Measurement of Radon Level in Dwellings of the Yıldırım County in Bursa (Kahraman A., Poffijn A., Kaynak G.), p. 268-270
- article: Effect of Thermal Annealing on the Sensitivity of Makrofol-DE Polycarbonate (Kahraman A., Poffijn A., Kaynak G.), p. 271-274
- article: Determination of Natural Radioactivity in Aggregates from Western Mediterranean Region (Pehlivanoğlu F., Kilinçarslan Ş.), p. 275-277
- article: Preparation and Characterization of LaMoO_3, La_xSr_{y}V_{z}O_3 and La_{x}Sr_{y}Mo_{z}O_3 Perovskite Type Oxides by the Sol-Gel Citrate Method (Figen H., Guldal N., Baykara S.), p. 278-280
- article: Structural Characterization of Al_2O_3 and CeO_2 Supported Ni, Co Loaded Ceramic Monolithic Catalysts (Guldal N., Baykara S.), p. 281-284
- article: Electrochemical Performance of Silicon/MWCNT Composite Electrodes for Lithium Ion Batteries (Cetinkaya T., Tocoglu U., Cevher O., Guler M., Akbulut H.), p. 285-287
- article: Methanol Vapor Sensing by Porous Silicon (Yılmaz O., Kayahan E., Gören F., Dumludağ F.), p. 288-289
- article: Cyclic Performance Study of Silicon/Carbon Nanotube Composite Anodes Using Electrochemical Impedance Spectroscopy (Tocoglu U., Cevher O., Cetinkaya T., Guler M., Akbulut H.), p. 290-292
- article: Effects of RF Power on Electrical and Structural Properties of Sputtered SnO_2:Sb Thin Films (Cevher O., Guler M., Tocoglu U., Cetinkaya T., Akbulut H., Okumus S.), p. 293-295
- article: Thin Film Nanostructured ATO and ATO Based Composite Anodes for Li-Ion Batteries (Cevher O., Guler M., Tocoglu U., Cetinkaya T., Akbulut H., Okumus S.), p. 296-298
- article: Radiation Shielding Properties of Shotcrete (Gunoglu K., Akkurt I., Basyigit C., Çakıroğlu M., Akkaş A.), p. 299-300
- article: Nanostructured ZnO Photoelectrode Synthesis for Dye Sensitized Solar Cells (Gültekin D., Alaf M., Akbulut H.), p. 301-303
- article: Wear Performance of Hardened 1.2333 Cold Work Tool Steel by Plasma Electrolysis (Özel A., Kumruoglu L.), p. 304-306
- article: Electrochemical Impedance of Sn Nanowire Arrays (Kaya H., Aydogmus E., Avcu D.), p. 307-309
- article: A Web-Based Virtual Experiment in Material Science: Tensile Test Laboratory Application (Kiraz A., Kubat C., Özbek Y., Uygun Ö., Eski H.), p. 310-312
- article: The Influence of Different Resin Cements and Pretreatments on the Bond Strength between Zirconia and Cement (Sun T., Hu C., Wang L., Shao L.), p. 313-315
- article: Radiation Protection by the Barite Coated Fabrics via Image Processing Methodology (Akarslan F., Molla T., Akkurt İ., Kilinçarslan Ş., Üncü I.), p. 316-318
- article: Nanocomposite ZnO:MWCNT Thin Films for Li-Ion Batteries Prepared via Reactive Magnetron Sputtering (Guler M., Cetinkaya T., Cevher O., Tocoglu U., Akbulut H.), p. 319-321
- article: Characteristics and Electrochemical Performance of TiO_2:MWCNT Nanocomposite Anodes for Li-Ion Batteries (Guler M., Cetinkaya T., Cevher O., Tocoglu U., Akbulut H.), p. 322-324
- article: The Promising Synthetic Route Hydrothermal Synthesis of Non-Stoichiometric Cerium and Boron Containing Compounds and Characterization (Çelik G., Kurtuluş F.), p. 325-326
- article: Development of W-Cu-Ni Electrical Contact Materials with Enhanced Mechanical Properties by Spark Plasma Sintering Process (Lungu M., Tsakiris V., Enescu E., Pătroi D., Marinescu V., Tălpeanu D., Pavelescu D., Dumitrescu G., Radulian A.), p. 327-330
- article: The Effect of Calcination Temperature on the Electrochemical Performance of ZnO Coated LiMn_2O_4/MWCNT Nanocomposite Cathodes (Akbulut A., Cetinkaya T., Guler M., Akbulut H.), p. 331-334
- article: The Superior Surface Discharge Capacity of Core-Shell Tinoxide/Multi Walled Carbon Nanotube Nanocomposite Anodes for Li-Ion Batteries (Akbulut H., Alaf M., Gultekin D.), p. 335-337
- article: The Effect of Different Organic Gelating Agents on Grain Size of ZnO Nanoparticles (Karaal Ş., Köse H., Aydin A., Akbulut H.), p. 338-340
- article: Measurements of Double Differential Cross-Sections for He at Intermediate Energy (Ozer Z., Olgac F., Ulu M., Aktas B., Dogan M.), p. 341-342
- article: Measurement of Double Differential Cross-Section for Electron Impact Ionization of Argon at 348 eV (Bozkurt G., Yavuz M., Ozer Z., Dogan M.), p. 343-344
- article: The Effect of Temperature on Grain Size of SnO_2 Nanoparticles Synthesized by Sol-Gel Method (Köse H., Aydin A., Akbulut H.), p. 345-347
- article: Nanostructured W-Cu Electrical Contact Materials Processed by Hot Isostatic Pressing (Tsakiris V., Lungu M., Enescu E., Pavelescu D., Dumitrescu G., Radulian A., Mocioi N.), p. 348-352
- article: Electrochemical Performance of Pulse Electrodeposited Sn-Ni/MWCNT Composite Anode for Lithium-Ion Batteries (Uysal M., Görmüş H., Karslıoğlu R., Alp A., Akbulut H.), p. 353-356
- article: Microwave-Assisted Synthesis of CeVO_4 in the Mild Conditions, Characterization and Investigation of Luminescent Properties (Çelik G., Kurtuluş F.), p. 357-358
- article: Corrosion Properties of CrAlN and TiAlN Coatings Deposited by Thermoreactive Deposition Process (Cegil O., Kılınc B., Sen S., Sen U.), p. 359-361
- article: Wear Behavior of TiAlN and CrAlN Coatings Deposited by TRD Process on AISI D2 Steel (Kılınc B., Cegil O., Sen S., Sen U.), p. 362-364
- article: Synthesis, Structural and Optical Properties of Mo-Doped ZnO Thin Films (Mekki A., Tabet N.), p. 365-367
- article: Preparation and Characterization of Urea/Formaldehyde/Rosa Canina sp. Seeds Composites (Gürses A., Karagöz S., Mindivan F., Güneş K., Doğar Ç., Aktürk S.), p. 368-373
- article: Synthesis and Characterization of Phenol/Urea/Formaldehyde and Clay Composites (Doğar Ç., Gürses A., Köktepe S., Mindivan F., Güneş K., Aktürk S.), p. 374-378
- article: Electrolytic Plasma Surface Cleaning of Industrial Metallic Components (Kumruoglu L., Özel A.), p. 379-381
- article: Parametric Study of the Seismic Response of Base Isolated Liquid Storage Tanks with Lead-Core Elastomeric Bearings (Yazıcı G.), p. 382-384
- article: Growth Analysis and Numerical Simulation of Cu_3BiS_3 Absorbing Layer Solar Cell through the wxAMPS and Finite Element Method (Mesa F., Ballesteros V., Dussan A.), p. 385-387
- article: Investigation of Mechanical and Dry Sliding Wear Behaviours of AlB_2/PE Polymer Matrix Composites (Savaş Ö., Ficici F., Kayikci R., Köksal S.), p. 388-390
- article: The Effect of Mg Supplement on Hydroxyapatite Produced by Chemical Precipitation (Baştan F., Ağtaş G., Özbek Y., Üstel F.), p. 391-392
- article: The Effect of Process Parameters on Surface Behaviors of Low Carbon Steels Modified by Pulse Plasma Technique (Agdaş G., Özbek Y.), p. 393-395
- article: Effect of B_4C Content on the Mechanical and Tribological Performances of Polypropylene (Dike A., Mindivan F., Mindivan H.), p. 396-398
- article: Characterization of CoTi Intermetallic Materials Produced by Electric Current Activated Sintering (Ergin N., Ozdemir O.), p. 399-401
- article: Suggestion of New Formulations for Schmidt Hammer and UPV Test Methods for Concrete (Çavdar A., Bingöl Ş.), p. 402-404
- article: One-Dimensional Cellular Automata with Reflective Boundary Conditions and Radius Three (Akin H., Siap I., Uguz S.), p. 405-407
- article: Coating Effect on Magnetic Properties of Fe_{36}Co_{36}B_{19.2}Si_{4.8}Mo_3W_1 Amorphous Ribbons (Perincek F., Haciismailoglu M., Sarlar K., Haciismailoglu M., Alper M., Kucuk I.), p. 408-410
- article: Electrical Properties of GaInAsSb/GaSb/GaAlAsSb Double Heterostructure with Low Diameter (Kucur B., Ahmetoglu M., Andreev I., Kunitsyna E., Mikhailova M., Yakovlev Y.), p. 411-413
- article: Gas Nitriding Behaviour of 34CrAlNi7 Nitriding Steel (Altinsoy I., Onder K., Celebi Efe F., Bindal C.), p. 414-416
- article: Comparing of Commercial and Cemented Cu-SiC Composites (Celebi Efe G., Altinsoy I., Yener T., Ipek M., Zeytin S., Bindal C.), p. 417-419
- article: Gamma Attenuation Behavior of h-BN and h-BN-TiB_2 Composites (Buyuk B., Beril Tugrul A., Okan Addemir A., Ay N.), p. 420-422
- article: Comparison of Lead and WC-Co Materials against Gamma Irradiation (Buyuk B., Tugrul A.), p. 423-425
- article: A New Approach to Synthesis of Free-Standing ZnO/MWCNT Nanocomposites by Vacuum Infiltration (Alaf M., Gultekin D., Akbulut H.), p. 426-428
- article: Recycling of Pure Magnesium Chips by Cold Press and Hot Extrusion Processes (Mindivan H., Taskin N., Kayali E.), p. 429-431
- article: Production of Mg-3Al Based Composites Reinforced with Ti6Al4V Particles (Kumruoglu L.), p. 432-434
- article: 2D Cellular Automata with an Image Processing Application (Uguz S., Sahin U., Siap I., Akin H.), p. 435-438
- article: Single Pulse Laser Ablation of AISI 316L Stainless Steel Surface Using Nd:YAG Laser Irradiation (Demir P., Kacar E., Akman E., Demir A.), p. 439-441
- article: Double Differential Cross-Section Measurements for Methane Molecule at 350 eV (Yavuz M., Isik N., Ozer Z., Ulu M., Doğan M.), p. 442-444
- article: Open Cell Aluminum Foams Produced by Polymer Impregnation Method (Zaman E., Keleş Ö.), p. 445-448
- article: A Simulation and Fabrication Works on Optimization of High Pressure Aluminum Die Casting Part (Ertürk S., Kumruoğlu L., Özel A.), p. 449-451
- article: Fabricating of Steel/Cast Iron Composite by Casting Route (Ertürk S., Çakır O., Kumruoglu L., Ozel A.), p. 452-453
- article: Noise Response and Stability in Injection Locked Semiconductor Ring Laser (Memon M., Fathallah H.), p. 454-455
- article: Oxidation Behavior of AlTiN/TiN Nanolayer Hard Coating at High Temperatures (Çalışkan H., Karaoğlanlı A.), p. 456-458
- article: Stability Analysis of Clamped Nonhomogeneous Shells on the Elastic Foundation (Sofiyev A., Deniz A., Ozyigit P., Pinarlik M.), p. 459-461
- article: Dependence of Modulation Bandwidth on Size of Optical Injection Locked Semiconductor Ring Laser (Memon M., Fathallah H.), p. 462-464
- article: Microstructural Characterization and Thermal Properties of Aluminium Titanate/YSZ Ceramics (Çitak E., Boyraz T.), p. 465-468
- article: Evaluation of Gamma Penetration through Plain Carbon Steels (Durmaz H., Beril Tugrul A., Buyuk B.), p. 469-472
- article: Investigation of Mechanical Properties of Metal Inert Gas-Brazed TRIP800 Steel Joints Using Different Shielding Gas Flow Rate (Akkas N., Varol F., Ferik E., Ilhan E., Ozsarac U., Aslanlar S.), p. 473-474
- article: The Effect of Sliding Motion on Tribological Characteristics of PA6 and Zinc-Borate Reinforced PA6 Composites (Akinci A.), p. 475-477
- article: Influence of Load and Speed on Sliding Tribology of Silica-Polyamide Composites against AISI 4140 Steel (Akinci A.), p. 478-480
- article: Surface Texturing of Vitamin E Blended UHMWPE for Reduction of Wear (Sagbas B., Durakbasa M.), p. 481-483
- article: Importance of Measurement Parameters for the Dental Implant Surface Characterization (Gunay A., Sagbas B., Durakbasa M.), p. 484-487
- article: Microstructural Characterization and Thermal Properties of Aluminium Titanate/Spinel Ceramic Matrix Composites (Önen U., Boyraz T.), p. 488-490
- article: The Effect of Low Temperature Plasma Nitriding on Wear Resistance of Ti6Al4V Alloy (Gul O., Sari N., Sinmazcelik T.), p. 491-493
- article: The Evaluation of Solid Particle Erosion in Polymethyl Methacrylate by Surface Topography Mapping (Fidan S.), p. 494-496
- article: Effect of Welding Current on Mechanical Properties of Welding Joints in SPA-C Steel Sheets in Resistance Spot Welding (Akkas N., Ilhan E.), p. 497-499
- article: Effect of Welding Current on Mechanical Properties of Welding Joints in S235JR(Cu) Steel Sheets in Resistance Spot Welding (Akkas N., Varol F., Ferik E., Ilhan E., Ozsarac U., Aslanlar S.), p. 500-502
- article: Rheological Behavior of Modified Starch/EVA Blends (Aydin I., Ergin M., Altun M.), p. 503-505
- article: Role of the Quartz Particles on Stain Resistance of the Polished Porcelain Tiles (Selli N., Tunali A.), p. 506-508
- article: Enhancement of the After-Glow Properties of Photoluminescent Tile by Designing Frit Composition with Low-Temperature Melting (Selli N., Tunali A.), p. 509-510
- article: Effect of B_2O_3/SiO_2 Ratio on Transparency of Anorthite Based Glass-Ceramic Glazes (Tunali A., Selli N.), p. 511-512
- article: Influence of the Photoluminescent Pigments' Particle Size Distribution on the After Glow Duration (Tunali A., Selli N.), p. 513-514
- article: An Investigation on Surface and Electrical Properties of Electrical Discharge Machined AISI D2 Tool Steel (Durmus A., Bayram A., Gunes S., Akay S.), p. 515-517
- article: Mechanical and Thermal Properties of Pumice Powder Filled PPS Composites (Sahin A., Yildiran Y., Avcu E., Fidan S., Sinmazcelik T.), p. 518-520
- article: Calculation of Greenland and Antarctica Glaciers' Weights Causing Some Earthquakes and Volcanic Activities (Ürüşan A., Uzel T., Eren K.), p. 521-522
- article: Effect of Particle Impact Angle, Erodent Particle Size and Acceleration Pressure on the Solid Particle Erosion Behavior of 3003 Aluminum Alloy (Yıldıran Y., Avcu E., Şahin A., Fidan S., Yetiştiren H., Sınmazçelik T.), p. 523-525
- article: Development of a Polymer Based Syntactic Foam for High Temperature Applications (Yazici M., Fahr P., Shukla A., Gunes S., Akay S.), p. 526-528
- article: Influence of Martensite Volume Fraction on Ductile to Brittle Transition of Triple Phase Ferrite-Perlite-Martensite Steels Joined by GMAW and Electrical Arc Welding (Ekici M., Ozsarac U.), p. 529-531
- article: On the Flexural Vibration of Pre-Stressed Nanobeams Based on a Nonlocal Theory (Rahmani O.), p. 532-533
- article: On Pseudo Random Bit Generators via Two-Dimensional Hybrid Cellular Automata (Temiz F., Siap I., Akin H.), p. 534-537
- article: Magnetic Properties of Poly (Divinylbenzene, Ethylene Glycol Dimethacrylate and Vinyl Alcohol) Containing Barium Ferrite Nanoparticles (Gunes S., Akay S., Kara A.), p. 538-540
- article: Influences of Particle Impingement Angle and Velocity on Surface Roughness, Erosion Rate, and 3D Surface Morphology of Solid Particle Eroded Ti6Al4V Alloy (Avcu E., Yıldıran Y., Şahin A., Fidan S., Sınmazçelik T.), p. 541-543
- article: Related Aspects on Using Digital Tools in the Process of Introducing Nanotechnology in Science Lessons (Gorghiu L., Gorghiu G.), p. 544-547
- article: B-Spline Solution for a Convection-Diffusion Equation (Caglar H., Caglar N., Ozer M.), p. 548-550
- article: The Numerical Solution of Fractional Diffusion Equation by Using Local Polynomial Regression (Caglar H., Caglar N., Ozer M.), p. 551-553
- article: B-Spline Solution and the Chaotic Dynamics of Troesch's Problem (Caglar H., Caglar N., Ozer M.), p. 554-560
- article: Tribological Behaviors of SiO_2 Added Polyester Matrix Thermosetting Composites (Akinci A., Ozsoy M., Firat M., Sen U.), p. 560-562
- article: Effects of Nb-Alloying on High-Temperature Oxidation of MoSi_2 (Sharif A.), p. 563-566
- article: Sintering Conditions for Al_2(WO_4)_3 High-Dense Ceramic (Yordanova A., Koseva I., Nikolov V.), p. 567-570
- article: Investigating Effects of Testing Parameters on Frictional Heating of UHMWPE by Taguchi Method (Sagbas B., Durakbasa M.), p. 571-573
- article: Optical Properties of BN and BBi Compounds (Yalcin B., Ustundag M., Aslan M.), p. 574-576
- article: The Evolution of Microstructure for Ductile Iron Treated under Different Thermal Cycles Using Electrolytic Plasma Treatment (Ayday A., Durman M.), p. 577-578
- article: The High Temperature Effect on Fibre Reinforced Self Compacting Lightweight Concrete Designed with Single and Hybrid Fibres (Bozkurt N.), p. 579-583
- article: Properties of the Surface Alloyed AISI 1020 Steel with Fe_{(15-x)}Mo_{x}B_5 Alloy (Abakay E., Sen S., Sen U.), p. 584-586
- article: Wear Properties of the Surface Alloyed AISI 1020 Steel with Fe_{(15-x)}Mo_{x}B_5 by TIG Welding Technique (Abakay E., Sen S., Sen U.), p. 587-589
- article: The Effect of Reinforcement Ratio on the Wear Behaviour of AlB_2 Flake Reinforced Metal Matrix Composites (Kayikci R., Savaş Ö., Koksal S., Demir A.), p. 590-592
- article: Improving the Surface Properties of Cp-Ti by Pulsed Electro-Spark Deposition (Yılmaz M., Atar E., Şahin O., Kayalı E.), p. 593-596
- article: Synthesis and Characterization of Fe_{80}B_{20} Nanoalloys Produced by Surfactant Assisted Ball Milling (Fadaie A., Akdeniz M., Mekhrabov A.), p. 597-599
- article: Effects of Nanoparticle Geometry and Temperature on the Structural Evolution in FeCo Nanoalloys (Yalçin M., Mekhrabov A., Akdeniz M.), p. 600-602
- article: Adherence Properties of Acrylic Bone Cement to Alumina Ceramics Designed for Clinical Applications (Cavalu S., Simon V., Akin I., Goller G.), p. 603-605
- article: Behavior of Quantum Fisher Information of Bell Pairs under Decoherence Channels (Ozaydin F., Altintas A., Bugu S., Yesilyurt C.), p. 606-607
- article: Photocatalytic Activity of TiO_2 Powders Synthesized by Supercritical Gas Antisolvent Method (Tuncer M., Ozdemir B.), p. 608-610
- article: Enhanced Electro-Optic Modulation Performance in Optical Buffers by Slowing Light in Optimized Photonic Crystal Slab Structures (Bagci F., Akaoglu B.), p. 611-614
- article: Wear Properties of Gabbro Based Glass and Glass-Ceramic Materials (Bayrak G.), p. 615-617
- article: Alpha Head on Collision with a Fixed Gold Nucleus, Taking into Account the Relativistic Rest Mass Variation as Implied by Mass-Energy Equivalence (Yarman T., Arik M., Kholmetskii A., Altintas A., Ozaydin F.), p. 618-619
- article: Bond Strength of Basalt Based Glass-Ceramic Coatings (Bayrak G., Ercenk E., Sen U., Yilmaz S.), p. 620-622
- article: Granite Based Glass-Ceramic Materials (Bayrak G., Yilmaz S.), p. 623-625
- article: Glass and Glass-Ceramics Produced from Fly Ash and Boron Waste (Ercenk E., Sen U., Bayrak G., Yilmaz S.), p. 626-628
- article: Sintering Behavior and Machinability in Mica Glass-Ceramic of the System SiO_2-Al_2O_3-MgO-K_2O-B_2O_3-F (Ercenk E., Yilmaz S.), p. 629-631
- article: The Effect of Perlite Addition on Erosive Wear Behavior of Alumina Ceramics (Tas S., Ercenk E., Yilmaz S.), p. 632-634
- article: A New Fiber Optic Spring (Yaltkaya S.), p. 635-637
- article: A Novel Photon Model - Featuring an Internal Dynamics along with an Amplitude of the Oscillating Particle of Light (Yarman T., Yesilyurt C., Arık M.), p. 638-641
- article: Shielding Effectiveness of Ceramic Bodies Produced with Natural Zeolite (Kanberoğlu B., Şükran Demirkıran A.), p. 642-644
- article: Comparison of Antibacterial Properties of Nano TiO_2 and ZnO Particle Filled Polymers (Altan M., Yildirim H.), p. 645-647
- article: Synthesis and Characterization of Spinel Li_4Ti_5O_{12} Anode Material by CTAB Assisted Sol-Gel Method (Kiliç Dokan F., Şahan H., Özdemır B., Özdemır N., Patat Ş.), p. 648-649
- article: Effects of TiO_2 Source on the Electrochemical Performance of Li_4Ti_5O_{12} (Kiliç Dokan F., Şahan H., Özdemır N., Özdemır B., Patat Ş.), p. 650-651
- article: Influence on Static Grain Growth and Sinterability of BaO Addition into 8YSZ (Aktas B., Tekeli S., Salman S.), p. 652-655
- article: Characterization of Fe-Nb-B Base Hardfacing of Steel (Kilinc B., Cegil O., Abakay E., Sen U., Sen S.), p. 656-658
- article: Plasma Electrolytic Oxidation of Binary Al-Sn Alloys (Gencer Y., Tarakci M., Gulec A., Cagatay Oter Z.), p. 659-663
- article: Properties of ZnO Nanopowders Synthesized by Glycine-Nitrate Gel Combustion (Yıldız Ö., Soydan A., Ipçizade E., Akın D., Uçak Ö.), p. 664-666
- article: Industrial-Scale Application of Characterization Techniques to Improve Surface Quality of Opaque Floor Tile Glazes (Tunali A.), p. 667-668
- article: Structural Analysis of Ce Doped La_{1-x}Sr_xCo_{1-y}Fe_yO_{3-δ} Nanopowders Synthesized by Glycine-Nitrate Gel Combustion (Yildiz Ö., Soydan A., Ata A., İpçızade E., Akin D., Uçak Ö.), p. 669-672
- article: FMR Study of Co/Ti Bilayer Thin Films (Erkovan M., Tokdemir Öztürk S., Taşkın Gazioğlu D., Topkaya R., Öztürk O.), p. 673-676

open years

JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.