Magnetic Losses Evolution of Ferritic Fe-Si Steel Subjected to Temper Rolling at Elevated Temperature

• Authors: I. Petryshynets , F. Kováč , L. Falat , V. Puchý , M. Šebek
• Languages of publication: EN

Abstracts

EN

The effects of heat transport phenomena and deformation gradient through the sheet cross-section on the microstructure, texture and magnetic properties of non-oriented Fe-Si steel were investigated. In order to achieve desired conditions for the steel microstructural and textural parameters improvement, a temper rolling process at elevated temperature was examined in combination with subsequent short term annealing, employing fast heating rate in laboratory conditions. The experimental material was represented by conventional medium silicon, vacuum degassed non-oriented steel that was taken directly from industrial line after final annealing. Performed electron back scattered diffraction measurements revealed that the experimental steel, treated by our proposed thermomechanical treatment, was characterized by coarse-grained microstructure with enhanced intensity of rotating cube texture. The magnetic losses of experimental samples were measured in ac magnetic field with 50 Hz frequency on the toroid with external and internal diameters of 25 mm and 15 mm, respectively. These measurements with magnetic field intensity of 2500 A/m showed that the application of our suggested treatment led to clear power losses reduction of the investigated material from initial 9.9 W/kg to 6.4 W/kg, i.e. by more than 35%.

Keywords

EN

61.72.-y; 75.50.Vv; 81.40.Ef; 61.72.Cc

Discipline

• 75.50.Vv: High coercivity materials
• 61.72.Cc: Kinetics of defect formation and annealing
• 81.40.Ef: Cold working, work hardening; annealing, post-deformation annealing, quenching, tempering recovery, and crystallization
• 61.72.-y: Defects and impurities in crystals; microstructure(for radiation induced defects, see 61.80.-x; for defects in surfaces, interfaces, and thin films, see 68.35.Dv and 68.55.Ln; see also 85.40.Ry Impurity doping, diffusion, and ion implantation technology; for effects of crystal defects and doping on superconducting transition temperature, see 74.62.Dh)

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2018
• Volume: 133
• Issue: 4
• Pages: 1065-1068

Dates

published

2018-04

Contributors

author

I. Petryshynets

• Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia

author

F. Kováč

• Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia

author

L. Falat

• Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia

author

V. Puchý

• Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia

author

M. Šebek

• Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia

References

• [1] D. Steiner Petrović, D. Mandrino, Mater. Charact. 62, 503 (2011) , doi: 10.1016/j.matchar.2011.03.011
• [2] J.B. Salinas, A.R. Salinas, J. Iron Steel Res. Int. 23, 166 (2016) , doi: 10.1016/S1006-706X(16)30029-2
• [3] J. Schneider, G. Li, A. Franke, B. Zhou, J. Magn. Magn. Mater. 424, 26 (2017) , doi: 10.1016/j.jmmm.2016.10.035
• [4] M. Mehdi, Y. He, E.J. Hilinski, A. Edrisy, J. Magn. Magn. Mater. 429, 148 (2017) , doi: 10.1016/j.jmmm.2017.01.020
• [5] J.J. Sidor, K. Verbeken, E. Gomes, J. Scneider, P.R. Calvillo, L.A.I. Kestens, Mater. Charact. 71, 49 (2017) , doi: 10.1016/j.matchar.2012.06.006
• [6] I. Petryshynets, F. Kovac, J. Marcin, I. Škorvanek, Acta Phys. Pol. A 126, 182 (2014) , doi: 10.12693/APhysPolA.126.182
• [7] F. Kováč, I. Petryshynets, V. Puchy, M. Šebek, J. Maruš, J. Electr. Eng. 66, 86 (2015)
• [8] F.J. Humphreys, M. Hatherly, Recrystallization and Related Annealing Phenomena, BPC Wheatons, 1995, p. 498

Identifiers

DOI

10.12693/APhysPolA.131.1065