Positron Annihilation Lifetime Spectroscopy of ABS Objects Manufactured by Fused Deposition Modelling

• Authors: M. Dryzek , E. Dryzek
• Languages of publication: EN

Abstracts

EN

Positron annihilation lifetime spectroscopy was used to study acrylonitrile butadiene styrene (ABS) specimens manufactured using fused deposition modelling to explore possibilities of identifying differences in molecular structure. The set of specimens was prepared including square tiles and long rectangular tiles (100 mm and 200 mm long) with all filament roads parallel to the longer edge. All types of tiles were produced with various infill line distance parameter resulting in different overlapping of the roads in horizontal and vertical directions. The slight increase of the ortho-positronium lifetime indicating increase of the mean free volume radius was observed for the longest tiles for which influence of weld interface is expected to be most pronounced. No differences were observed for different infill line distance parameters.

Keywords

EN

78.70.Bj; 61.41.+e

Discipline

• 61.41.+e: Polymers, elastomers, and plastics(see also 81.05.Lg in materials science; for rheology of polymers, see section 83; for polymer reactions and polymerization, see 82.35.-x in physical chemistry and chemical physics)
• 78.70.Bj: Positron annihilation(for positron states, see 71.60.+z in electronic structure of bulk materials; for positronium chemistry, see 82.30.Gg in physical chemistry and chemical physics)

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2017
• Volume: 132
• Issue: 5
• Pages: 1506-1508

Dates

published

2017-11

Contributors

author

M. Dryzek

• Institute for Computational Civil Engineering, Cracow University of Technology, Kraków, Poland

author

E. Dryzek

• Institute of Nuclear Physics, Polish Academy of Sciences, PL-31342 Kraków, Poland

References

• [1] B.N. Turner, R. Strong, S.A. Gold, Rapid Prototyping J. 20, 192 (2015), doi: 10.1108/RPJ-01-2013-0012
• [2] U.K. Roopavath, D.M. Kalaskar, in: 3D Printing in Medicine, Ed. D.M. Kalaskar, Woodhead Publ., 2017, p. 1, doi: 10.1016/B978-0-08-100717-4.00001-6
• [3] S. Curran, P. Chambon, R. Lind, L. Love, SAE Technical Paper, 2016-01-0328 (2016), doi: 10.4271/2016-01-0328
• [4] F.P. Bos, R.J.M. Wolfs, Z.Y. Ahmed, T.A.M. Salet, Virt. Phys. Prototyp. 11, 209 (2016), doi: 10.1080/17452759.2016.1209867
• [5] R. Marissen, D. Schudy, A.V.J.M. Kemp, S.M.H. Coolen, W.G. Duijzings, A. Van Der Pol, A.J. Van Gulick, J. Mater. Sci. 36, 4167 (2001), doi: 10.1023/A:1017960704248
• [6] D.P. Cole, J.C. Riddick, H.M. Iftekhar Jaim, K.E. Strawhecker, N.E. Zander, Appl. Polym. Sci. 133, 30 (2016), doi: 10.1002/APP.43671
• [7] M.S. Hossain, J. Ramos, D. Espalin, M. Perez, R. Wicker, in: 24th Int. SFF Symp. An Additive Manufacturing Conf. SFF 2013, University of Texas at Austin, 2013, p. 380
• [8] L. Li, Q. Sun, C. Bellehumeur, P. Gu, J. Manuf. Process. 4, 129 (2002), doi: 10.1016/S1526-6125(02)70139-4
• [9] J. Kansy, Nucl. Instrum. Methods A 374, 235 (1996), doi: 10.1016/0168-9002(96)00075-7
• [10] S.T. Tao, J. Chem. Phys. 56, 5499 (1972), doi: 10.1063/1.1677067
• [11] N. Eldrup, D. Lightbody, J.N. Sherwood, Chem. Phys. 63, 51 (1981), doi: 10.1016/0301-0104(81)80307-2
• [12] G. Dlubek, M.A. Alam, M. Stolp, H.-J. Radusch, J. Polym. Sci. B Polym. Phys. 37, 1749 (1999), doi: 10.1002/(SICI)1099-0488(19990715)37:14<1749::AID-POLB17>3.0.CO;2-V
• [13] B.E. Tiganis, L.S. Burn, P. Davis, A.J. Hill, Polym. Degrad. Stabil. 76, 425 (2002), doi: 10.1016/S0141-3910(02)00045-9

Identifiers

DOI

10.12693/APhysPolA.132.1506