PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 132 | 3 | 697-701
Article title

Effects of Third-generation LED LCU on Nanomechanical Properties of Orthodontic Adhesives

Content
Title variants
Languages of publication
EN
Abstracts
EN
The aim of this study was to compare the hardness and elastic modulus of orthodontic adhesives cured with different light-curing units, based on light-emitting diodes. Standardized samples of orthodontic adhesives, Transbond™ XT, Opal® Bond™ and Light Bond™ were prepared in cylinder blocks and cured for three seconds with Valo Ortho LED (Ultradent Products, South Jordan, Utah) and Valo LED High-Power Mode. After grinding and polishing, specimens were stored in distilled water at 37°C for one day. Specimens were investigated using nanoindenter. Employment of Valo Ortho unit has resulted in significantly higher elastic modules for Transbond™ XT (p=0.041). The highest nanohardness and elastic modules were measured for Transbond™ XT cured with Valo Ortho (9.47 GPa; 81.85 GPa, respectively) and lowest for Opal® Bond™ for both Valo Ortho (0.44 GPa; 14.52 GPa, respectively) and Valo High-Power groups (0.44 GPa; 11.84 GPa, respectively).
Keywords
EN
Contributors
author
  • Mustafa Kemal University, Faculty of Dentistry, Department of Orthodontics, Hatay, Turkey
author
  • Gaziosmanpaşa University, Faculty of Dentistry, Department of Pediatric Dentistry, Tokat Turkey
  • Mustafa Kemal University, Faculty of Dentistry, Department of Orthodontics, Hatay, Turkey
author
  • Private Dentist, Hatay, Turkey
author
  • Mustafa Kemal University, Faculty of Dentistry, Department of Prosthodontics, Hatay, Turkey
author
  • Mustafa Kemal University, Faculty of Arts and Sciences, Department of Physics, Atom and Molecular Physical Education Department, Hatay, Turkey
References
  • [1] S. Üşümez, T. Büyükyılmaz, A.I. Karaman, Am. J. Ortodont. Dentofacial Orthoped. 123, 641 (2003), doi: 10.1016/s0889-5406(03)00201-4
  • [2] M. Sfondrini, V. Cacciafesta, C. Klersy, Am. J. Ortodont. Dentofacial Orthoped. 125, 342 (2004), doi: 10.1016/j.ajodo.2003.02.008
  • [3] M.F. Sfondrini, V. Cacciafesta, A. Pistorio, G. Sfondrini, Am. J. Ortodont. Dentofacial Orthoped. 119, 30 (2001), doi: 10.1067/mod.2001.111399
  • [4] S.I. Ramoglu, S. Usumez, T. Buyukyilmaz, Angle Orthodont. 78, 140 (2008), doi: 10.2319/112106-473.1
  • [5] K. Okada, S. Tosaki, K. Hirota, W. Hume, Dental Mater. 17, 34 (2001), doi: 10.1016/s0109-5641(00)00053-1
  • [6] B. Kitchens, M. Wells, D. Tantbirojn, A. Versluis, Int. J. Paediatric Dentistry 25, 79 (2015), doi: 10.1111/ipd.12102
  • [7] N. Silikas, G. Eliades, D. Watts, Dental Mater. 16, 292 (2000), doi: 10.1016/s0109-5641(00)00020-8
  • [8] N. Gonulol, S. Ozer, E.S. Tunc, Int. J. Paediatric Dentistry 26, 376 (2016), doi: 10.1111/ipd.12213
  • [9] A. Santini, Dental Update 37, 214 (2010)
  • [10] A.A. Oz, A.Z. Oz, S. Arici, Am. J. Ortodont. Dentofacial Orthoped. 149, 212 (2016), doi: 10.1016/j.ajodo.2015.07.036
  • [11] M.F. Sfondrini, V. Cacciafesta, A. Scribante, C. Klersy, Am. J. Ortodont. Dentofacial Orthoped. 125, 342 (2004), doi: 10.1016/j.ajodo.2003.02.008
  • [12] P.S. Fleming, T. Eliades, C. Katsaros, N. Pandis, Am. J. Ortodont. Dentofacial Orthoped. 143, S92 (2013), doi: 10.1016/j.ajodo.2012.07.018
  • [13] W.J. Dunn, L.J. Taloumis, Am. J. Ortodont. Dentofacial Orthoped. 122, 236 (2002), doi: 10.1067/mod.2002.123949
  • [14] D.L. Leonard, D.G. Charlton, H.W. Roberts, M.E. Cohen, J. Esthetic Restorative Dent. 14, 286 (2002), doi: 10.1111/j.1708-8240.2002.tb00524.x
  • [15] J.D. Ward, B.J. Wolf, L.P. Leite, J. Zhou, Angle Orthodont. 85, 1064 (2015), doi: 10.2319/080714-556.1
  • [16] M. Shokrieh, M. Hosseinkhani, M. Naimi-Jamal, H. Tourani, Polymer Test. 32, 45 (2013), doi: 10.1016/j.polymertesting.2012.09.001
  • [17] S.H. Raji, H. Banimostafaee, F. Hajizadeh, Dental Res. J. 11, 67 (2014)
  • [18] M. Iijima, T. Muguruma, W.A. Brantley, T. Yuasa, J. Uechi, I. Mizoguchi, Am. J. Ortodont. Dentofacial Orthoped. 138, 420 (2010), doi: 10.1016/j.ajodo.2008.08.039
  • [19] K. Ikemura, T. Endo, Dental Mater. J. 29, 481 (2010), doi: 10.4012/dmj.2009-137
  • [20] W.C. Oliver, G.M. Pharr, J. Mater. Res. 7, 1564 (1992), doi: 10.1557/jmr.1992.1564
  • [21] T. Uysal, F.A. Basciftci, Y. Sener, M.S. Botsali, A. Demir, Angle Orthodont. 78, 134 (2008), doi: 10.2319/020507-56.1
  • [22] N. Kohda, M. Iijima, W. Brantley, T. Muguruma, T. Yuasa, S. Nakagaki, I. Mizoguchi, Angle Orthodont. 82, 187 (2012), doi: 10.2319/020411-78.1
  • [23] G. Marshall, M. Balooch, R. Gallagher, S. Gansky, S. Marshall, J. Biomed. Mater. Res. 54, 87 (2001), doi: 10.1002/1097-4636(200101)54:1<87::aid-jbm10>3.0.co;2-z
  • [24] H. Altan, F. Bilgic, Z. Arslanoglu, E. Kale, A.K. Kale, A. Altan, O. Sahin, Acta Phys. Pol. A 130, 394 (2016), doi: 10.12693/aphyspola.130.394
  • [25] J. Zhou, L.L. Hsiung, J. Biomed. Mater. Res. Part A 81, 66 (2007), doi: 10.1002/jbm.a.31012
  • [26] C. Bréchignac, P. Houdy, M. Lahmani, Nanomaterials and Nanochemistry, Springer, Berlin Heidelberg 2008, doi: 10.1007/978-3-540-72993-8
  • [27] L. Zheng, J. Zheng, L. Weng, L. Qian, Z. Zhou, Wear 271, 2297 (2011), doi: 10.1016/j.wear.2010.11.025
  • [28] F. Lippert, D.M. Parker, K.D. Jandt, J. Colloid Interface Sci. 280, 442 (2004), doi: 10.1016/j.jcis.2004.08.016
  • [29] K.A. Schulze, S.J. Marshall, S.A. Gansky, G.W. Marshall, Dental Mater. 19, 612 (2003), doi: 10.1016/s0109-5641(03)00003-4
  • [30] J. Ferracane, J. Mitchem, J. Condon, R. Todd, J. Dental Res. 76, 1508 (1997), doi: 10.1177/00220345970760081401
  • [31] J. Leprince, J. Devaux, T. Mullier, J. Vreven, G. Leloup, Operative Dentist. 35, 220 (2010), doi: 10.2341/09-203-l
  • [32] U.B. Campregher, S. Samuel, C. Fortes, A. Medina, F.M. Collares, F.A. Ogliari, J. Contemp. Dent. Pract. 8, 35 (2007)
  • [33] F.A. Rueggeberg, Dental Mater. 27, 39 (2011), doi: 10.1016/j.dental.2010.10.021
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv132n3p078kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.