PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 132 | 3 | 599-603
Article title

Investigation of Wear Strength of Blast Furnace Slag Blended Polymer Materials

Content
Title variants
Languages of publication
EN
Abstracts
EN
Having symmetrical and balanced material properties, polymer matrix composites are increasingly becoming popular due to easiness of construction and are use in the production of aerospace and automotive structures. In the study, we developed polymer composites based on epoxy resins, containing up to 40 wt.% of blast furnace slag and determined their pin-on-disc dynamic friction, wear, Shore hardness and surface roughness values. Wear tests were performed using a pin-on-disc under dry friction conditions, at the loads of 5, 10, 15 and 30 N, using slip velocity of 0.3 m/s and along distance of 500 m. The hardness and wear resistance values increased with the increase in the content of blast furnace slag. Showing the relationship between wear rate and hardness, an equation with parameters dependent on load was provided. There was an increase in the dynamic friction with an increase in the surface roughness. In addition, dynamic friction was an increasing function of the wear rate. The wear surfaces of the polymer composites were analyzed using scanning electron microscopy. It was observed that the wear rate of the epoxy composites and pure epoxy samples ranged from 19.85 to 171.42 mm³/Nm.
Publisher

Year
Volume
132
Issue
3
Pages
599-603
Physical description
Dates
published
2017-09
Contributors
author
  • Afyon Kocatepe University, Metallurgy and Materials Engineering Department, Afyonkarahisar, Turkey
author
  • Afyon Kocatepe University, Civil Engineering Department, Afyonkarahisar, Turkey
author
  • Afyon Kocatepe University, Materials Science and Engineering Department, Afyonkarahisar, Turkey
author
  • Afyon Kocatepe University, Mining Engineering Department, Afyonkarahisar, Turkey
References
  • [1] J.W. Hamling, R.W. Kriner, Cement Concrete Aggreg. 14, 13 (1992), doi: 10.1520/CCA10571J
  • [2] F.J. Hogan, J.W. Meusel, Cement Concrete Aggreg. 3, 40 (1981), doi: 10.1520/CCA10201J
  • [3] C. Duos, J. Eggers, Rpt. No. FHWA/LA-99/336, Louisiana Trans. Res. Center, Baton Rouge, Louisiana, Oct. 1999, p. 45
  • [4] I. Akkurt, S. Emikönel, F. Akarslan, K. Günoğlu, Ş. Kilinçarslan, I. Uncü, Acta Phys. Pol. A 128, B-53 (2015), doi: 10.12693/APhysPolA.128.B-53
  • [5] Y. Ceylan, H. Yumurtaci Aydogmus, K. Usta, A. Usta, N. Ceylan, H. Yilmaz, Acta Phys. Pol. A 130, 167 (2016), doi: 10.12693/APhysPolA.130.167
  • [6] J. Barton, A. Niemczyk, K. Czaja, Ł. Korach, B. Sachermajewska, Chemik 68, 280 (2014)
  • [7] S. Ekşi, K. Genel, Acta Phys. Pol. A 128, B-59 (2015), doi: 10.12693/APhysPolA.128.B-59
  • [8] I.K. Yilmazcoban, S. Doner, Acta Phys. Pol. A 130, 342 (2016), doi: 10.12693/APhysPolA.130.342
  • [9] I. Abdalrazaq, W.A. Soud, O.S. Abdullah, J. Eng. Development 17, 1813 (2013)
  • [10] N. Ozsoy, M. Ozsoy, A. Mimaroglu, Acta Phys. Pol. A 128, B-55 (2015), doi: 10.12693/APhysPolA.128.B-55
  • [11] B. Suresha, B.N. Ravi Kumar, M. Venkataramareddy, T. Jayaraju, Mater. Design 31, 1993 (2010), doi: 10.1016/j.matdes.2009.10.031
  • [12] T. Uygunoglu, I. Gunes, B. Witold, Mater. Res.-Ibero-Am. J. Mater. 18, 1188 (2015)
  • [13] M. Uzun, K. Yildiz, Acta Phys. Pol. A 128, B-337 (2015), doi: 10.12693/APhysPolA.128.B-337
  • [14] A. Günen, Acta Phys. Pol. A 130, 217 (2016), doi: 10.12693/APhysPolA.130.217
  • [15] A.P. Harsha, Wear 271, 942 (2011), doi: 10.1016/j.wear.2011.03.019
  • [16] P.H. Shipway, N.K. Ngao, Wear 255, 742 (2003), doi: 10.1016/S0043-1648(03)00106-6
  • [17] J. Cayer-Barrioz, D. Mazuyer, Ph. Kapsa, A. Chateauminois, G. Robert, Polymer 45, 2729 (2004)
  • [18] A. Golchin, G.F. Simmons, S. Glavatskih, B. Prakash, in: 15th Nordic Symp. Tribology - NordTrib 2012, Norway 2012, p. 12
  • [19] W. Brostow, P. Kumar, D. Vrsaljko, J. Whitworth, J. Nanosci. Nanotechnol. 11, 3922 (2011), doi: 10.1166/jnn.2011.3849
  • [20] O. Olea-Mejla, W. Brostow, E. Buchman, J. Nanosci. Nanotechnol. 10, 8524 (2010)
  • [21] T. Uygunoğlu, W. Brostow, G. Ibrahim, Polimeros 25, 271 (2015)
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv132n3p054kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.