Preferences help
enabled [disable] Abstract
Number of results
2017 | 132 | 3 | 580-584
Article title

Examination of Different Heat Exchangers and the Thermal Activities of Different Designs

Title variants
Languages of publication
In this study, instead of gasketed or brazed plate heat exchangers, which are used in various fields of application, a direct metal sintering method is used to design a heat exchanger with its original geometry and with different geometries. Studies of heat exchangers found in published literature were reviewed, and the thermal behaviors of the proposed unique designs were examined. Usually heat exchangers using this design do not use channel spacing angles of 30-45-60-75° for the plate ducts. The thermal behaviors of the fluid-circulating systems were analyzed using ANSYS FLUENT software, and they used the boundary conditions found in the literature for this design. Heat transfer between the heat exchanger channels and channel walls was calculated. The analyses results show that an increase in the amount of heat transfer surface area and also an increase in surface roughness increased the amount of positive heat transfer.
Physical description
  • Suleyman Demirel University, Engineering Faculty, Mechanical Engineering Department, Isparta, Turkey
  • Suleyman Demirel University, Engineering Faculty, Mechanical Engineering Department, Isparta, Turkey
  • Suleyman Demirel University, Engineering Faculty, Mechanical Engineering Department, Isparta, Turkey
  • [1] W.M. Kays, A.L. London, Compact Heat Exchangers, Krieger Publ. Co., Malabar (FL) 1998
  • [2] L. Ventola, F. Robotti, M. Dialameh, F. Calignano, D. Manfredi, E. Chiavazzo, P. Asinari,Int. J. Heat Mass Trans. 75, 58 (2014), doi: 10.1016/j.ijheatmasstransfer.2014.03.037
  • [3] A. Hussein, L. Hao, C. Yan, R. Everson, P. Young, J. Mater. Process. Technol. 213, 1019 (2013), doi: 10.1016/j.jmatprotec.2013.01.020
  • [4] R. Hudak, M. Sarık, R. Dadej, Acta Mech. Automat. 7, 15 (2014), doi: 10.2478/ama-2013-0003
  • [5] K. Zeng, D. Pal, B. Stucker, Proc. Solid Freeform Fabr. Symp. Austin 2012, p. 796
  • [6] A.R.R. Bineli, A.P. Gimenez Peres, A.L. Jardini, R. M. Filho, in: 6th Braz. Conf. Manuf. Eng., Caxias do Sul 2011
  • [7] D. Thomas, The Development of Design Rules for Selective Laser Melting, Cardiff Metropolitan University, 2009 dspace/handle/10369/913
  • [8] S. Tsopanos, C.J. Sutcliffe, I. Owen, in: Proc. Fifth Int. Conf. Enh. Comp. Ultra-Comp. Heat Exch. Sci. Eng. Techn., HTFS, Hyprotech, Harwell 2005
  • [9] T. Wang, G. Ding, Appl. Therm. Eng. 81, 102 (2015), doi: 10.1016/j.applthermaleng.2015.02.020
  • [10] H. Li, P. Hrnjak, Appl. Therm. Eng. 78, 410 (2015), doi: 10.1016/j.applthermaleng.2015.01.003
  • [11] M. Sheikholeslami, M. Gorji-Bandpy, D.D. Ganji, Exp. Therm. Fluid Sci. 70, 185 (2015), doi: 10.1016/j.expthermflusci.2015.09.002
  • [12] Y. Gao, R. Fan, H.S. Li, R. Liu, X.X. Lin, H.B. Guo, Y.T. Gao, Energy Build. 110, 302 (2015), doi: 10.1016/j.enbuild.2015.10.030
  • [13] J. Cui, Y. Cui, Energies 2015, 5704 (2015), doi: 10.3390/en8065704
  • [14] E. Stone, Heat Sinks are an Ideal DMLS Application, i3D MFG 2015
  • [15] A. Foroozmehr, M. Badrossamay, E Foroozmehr, S. Golabi, Mater. Des. 89, 255 (2015), doi: 10.1016/j.matdes.2015.10.002
  • [16] P. Peyre, Y. Rouchausse, D. Defauchy, G. Régnier, J. Mater. Process. Technol. 225, 326 (2015), doi: 10.1016/j.jmatprotec.2015.04.030
  • [17] H. Brooks, S. Molony, Mater. Des. 90, 276 (2015), doi: 10.1016/j.matdes.2015.10.123
  • [18] E. Ebrahimzadeh, P. Wilding, D. Frankman, F. Fazlollahi, L.L. Baxter, Appl. Therm. Eng 93, 1006 (2015), doi: 10.1016/j.applthermaleng.2015.10.017
  • [19] K. Mehmet, I. Osman, G. Barış, Acta. Phys. Pol. A 128, B-49 (2015), doi: 10.12693/APhysPolA.128.B-49
  • [20] ANSYS FLUENT 14 User Guide, Fluent Inc., USA 2013
Document Type
Publication order reference
YADDA identifier
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.