PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 132 | 2 | 283-287
Article title

Production of Molybdenum and Tantalum Ion Beams using CCl₂F₂

Content
Title variants
Languages of publication
EN
Abstracts
EN
A new method of refractory metal (like Mo and Ta) ion beam production using the arc discharge ion source and CCl₂F₂ (dichlorodifluoromethane) used as a feeding gas supported into the discharge chamber is presented. It is based on etching of the refractory metal parts (e.g. anode or a dedicated tube) Cl and F containing plasma. The results of measurements of the dependences of ion currents on the working parameters like discharge and filament currents as well as on the magnetic field flux density of an external electromagnet coil are shown and discussed. The separated Mo⁺ and Ta⁺ beam currents of approximately 22 μA and 2 μA, respectively, were obtained.
Keywords
EN
Contributors
author
  • Institute of Physics, Maria Curie-Skłodowska University, Pl. M. Curie-Skłodowskiej 1, 20-031 Lublin, Poland
author
  • Institute of Physics, Maria Curie-Skłodowska University, Pl. M. Curie-Skłodowskiej 1, 20-031 Lublin, Poland
author
  • Institute of Physics, Maria Curie-Skłodowska University, Pl. M. Curie-Skłodowskiej 1, 20-031 Lublin, Poland
author
  • Institute of Physics, Maria Curie-Skłodowska University, Pl. M. Curie-Skłodowskiej 1, 20-031 Lublin, Poland
author
  • Institute of Physics, Maria Curie-Skłodowska University, Pl. M. Curie-Skłodowskiej 1, 20-031 Lublin, Poland
author
  • Institute of Physics, Maria Curie-Skłodowska University, Pl. M. Curie-Skłodowskiej 1, 20-031 Lublin, Poland
author
  • Laboratory of Nuclear Problems, JINR Dubna, Russia
author
  • Lublin University of Technology, Nadbystrzycka 38A, 20-618 Lublin, Poland
References
  • [1] F. Komarov, L. Vlasukova, O. Milchanin, A. Mudryi, B. Dunets, W. Wesch, E. Wendler, Phys. Status Solidi A 209, 148 (2012)
  • [2] S. Prucnal, S.-Q. Zhou, X. Ou, H. Reuther, M.O. Liedke, A. Mücklich, M. Helm, J. Zuk, M. Turek, K. Pyszniak, W. Skorupa, Nanotechnology 23, 485204 (2012)
  • [3] J. Bowsher, A. Hussain, P. Williams, J. Nevelos, J.C. Shelton, , J. Arthropl. 19, 107 (2004)
  • [4] P. Budzynski, J. Sielanko, Acta. Phys. Pol. A 128, 841 (2015), doi: 10.12693/APhysPolA.128.841
  • [5] A.M. Abdul-Kader, A. Turos, D. Grambole, J. Jagielski, A. Piatkowska, N.K. Madi, M. Al-Maadeed, Nucl. Instrum. Methods Phys. Res. B 240, 152 (2005)
  • [6] V.N. Popok, Rev. Adv. Mater. Sci. 30, 1 (2012)
  • [7] S. Prucnal, M. Glaser, A. Lugstein, E. Bertagnolli, M. Stoegger-Pollach, S. Zhou, M. Helm, D. Reichel, L. Rebohle, M. Turek, J. Żuk, W. Skorupa, Nano Res. 7, 179 (2014)
  • [8] I.G. Brown, The Physics and Technology of Ion Sources, Wiley, Weinheim 2004
  • [9] H. Zhang, Ion Sources, Sci. Press, Beijing, and Springer, Berlin 1999
  • [10] C.M. Abreu, M.J. Cristóbal, R. Figueroa, G. Pena, Corros. Sci. 54, 143 (2012)
  • [11] W. Zhongda, L. Songmei, Acta Phys.-Chim. Sin. 8, 401 (1992)
  • [12] X. Wang, X. Zeng, G. Wu, S. Yao, Y. Lai, J. Alloys Comp. 437, 87 (2007)
  • [13] C.M. Abreu, M.J. Cristóbal, R. Figueroa, X.R. Novoa, G. Pena, M.C. Perez, Def. Diff. Forum 289-292, 175 (2009)
  • [14] X. Wang, X. Zeng, G. Wu, S. Yao, L. Li, Nuclear Instrum. Methods Phys. Res. B 263, 401 (2007)
  • [15] R. Figueroa, C.M. Abreu, M.J. Cristóbal, G. Pena, Wear 276-277, 53 (2012)
  • [16] D.Y. Zhang, Q.Y. Fei, H.M. Zhao, M. Geng, X.C. Zeng, P.K. Chu, Thin Solid Films 484, 215 (2005)
  • [17] W. Ensinger, R. Nowak, Nucl. Instrum. Methods 80, 1085 (1993)
  • [18] A.K. Rai, R.S. Bhattacharya, S.C. Kung, J. Appl. Phys. 68, 5169 (1990)
  • [19] I.G. Brown, B. Feinberg, J.E. Galvin, J. Appl. Phys. 63, 4889 (1988)
  • [20] B.X. Liu, D.H. Zhu, H.B. Lu, K. Tao, MRS Proc. 316, 795 (1993)
  • [21] H. Koivisto, J. Arje, M. Nurmia, Rev. Sci. Instrum. 69, 785 (1998)
  • [22] M. Kanter, Nucl. Instrum. Methods Phys. Res. B 70, 200 (1992)
  • [23] S. Gammino, L. Torrisi, G. Ciavola, L. Ando, J. Wolowski, L. Laska, J. Krasa, A. Picciotto, Nucl. Instrum. Methods Phys. Res. B 209, 345 (2003)
  • [24] J. M. Nitschke, Nucl. Instrum. Methods Phys. Res. A 236, 1 (1985)
  • [25] Y.V. Yushkevich, M. Turek, D. Mączka, K. Pyszniak, B. Słowiński, Y.A. Vaganov, Nukleonika 57, 351 (2012)
  • [26] M. Turek, S. Prucnal, A. Droździel, K. Pyszniak, Rev. Sci. Instrum. 80, 043304 (2009)
  • [27] M. Turek, A. Droździel, K. Pyszniak, S. Prucnal, Nucl. Instrum. Methods Phys. Res. B 269, 700 (2011)
  • [28] M. Turek, A. Drozdziel, K. Pyszniak, S. Prucnal, J. Zuk, Przeglad Elektrotechniczny 86, 193 (2010) (in Polish)
  • [29] M. Turek, A. Droździel, K. Pyszniak, S. Prucnal, D. Mączka, Acta. Phys. Pol. A 125, 1388 (2014), doi: 10.12693/APhysPolA.125.1388
  • [30] J. Sielanko, J. Filiks, M. Sowa, J. Zinkiewicz, M. Drewniak, Vacuum 46, 1459 (1995)
  • [31] Functionalized Inorganic Fluorides: Synthesis, Characterization and Properties of Nanostructured Solids, Ed. A. Tressaud, Wiley 2010
  • [32] Y. Wang, W. Lee, C. Chen, L. Hsieh, Environ. Sci. Technol. 33, 2234 (1999)
  • [33] J. Radic-Peric, A. Dasic, J. Therm. Anal. Calorim. 79, 59 (2005)
  • [34] M. Ohno, Y. Ozawa, T. Ono, Int. J. Plasma Environm. Sci. Technol. 1, 159 (2007)
  • [35] V.M. Donnelly, A. Kornblit, J. Vac. Sci. Technol. A 31, 050825 (2013)
  • [36] A.I. Picard, G. Turban, Plasma Chem. Plasma Proces. 5, 333 (1985)
  • [37] D.S. Fischl, D.W. Hess, J. Vac. Sci. Technol. B 6, 1577 (1988)
  • [38] V.J. Tu, J.Y. Jeong, A. Schutze, S.E. Babayan, G. Ding, S. Selwyn, R.F. Hicks, J. Vac. Sci. Technol. A 18, 2799 (2000)
  • [39] M. Yamada, M. Nakaishi, K. Sugishima, J. Electrochem. Soc. 138, 496 (1991)
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv132n2p19kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.