Metrology and 3D Imaging of Microstructural Elements in Materials for Environmentally Friendly Power Plants

• Authors: A. Kruk , A. Czyrska-Filemonowicz
• Languages of publication: EN

Abstracts

EN

The aim of this study was the application of tomographic techniques (focused ion beam-scanning electron microscopy, scanning transmission electron microscopy-energy-dispersive X-ray spectroscopy) to qualitative and quantitative characterization of structural elements in T/P92 creep resistant 9% Cr steel, Allvac 718Plus Ni-based superalloy and W-based alloy - multiphase materials for environmentally friendly power plants exposed to extreme operational conditions. The study showed that tomography techniques permit to obtain complementary information about microstructural features (precipitates size, shape and their spatial distribution) in the reconstructed volume with comparison to conventional particle analysis methods, e.g. quantitative transmission electron microscopy and scanning electron microscopy metallography.

Keywords

EN

06.90.+v; 87.64.Ee; 81.05.Bx

Discipline

• 81.05.Bx: Metals, semimetals, and alloys
• 06.90.+v: Other topics in metrology, measurements, and laboratory procedures (restricted to new topics in section 06)
• 87.64.Ee: Electron microscopy

• Journal: Acta Physica Polonica A
• Year: 2017
• Volume: 131
• Issue: 5
• Pages: 1311-1314

Dates

published

2017-05

Contributors

author

A. Kruk

• AGH University of Science and Technology, International Centre of Electron Microscopy for Materials Science & Faculty of Metals Engineering and Industrial Computer Science, Al. A. Mickiewicza 30, 30-059 Krakow, Poland

author

A. Czyrska-Filemonowicz

• AGH University of Science and Technology, International Centre of Electron Microscopy for Materials Science & Faculty of Metals Engineering and Industrial Computer Science, Al. A. Mickiewicza 30, 30-059 Krakow, Poland

References

• [1] K. Kulawik, P.A. Buffat, A. Kruk, A. Wusatowska-Sarnek, A. Czyrska-Filemonowicz, Mater. Character. 100, 74 (2015), doi: 10.1016/j.matchar.2014.12.012
• [2] A. Kruk, A. Czyrska-Filemonowicz, Arch. Metall. Mater. 58, No. 2 (2013), doi: 10.2478/amm-2013-0005
• [3] P.A. Midgley, R.E. Dunin-Borkowski, Nature Mater. 8, 271 (2009), doi: 10.1038/nmat2406
• [4] A. Kruk, G. Cempura, S. Lech, A. Czyrska-Filemonowicz, Arch. Metall. Mater 61, No. 2 (2016), doi: 10.1515/amm-2016-0093
• [5] A. Czyrska-Filemonowicz, P.J. Ennis, A. Zielińska-Lipiec, Metallurgy on the Turn of the 20th Century, Ed. K. Swiątkowski, Polish Academy of Sciences, AKAPIT, Kraków 2002
• [6] N.P. Taylor, C.B.A. Forty, D.A. Petti, K.A. McCarthy, J. Nucl. Mater. 283-287, 28 (2000), doi: 10.1016/S0022-3115(00)00101-X
• [7] G. Cempura, A. Kruk, C. Thomser, M. Wirtz, A. Czyrska-Filemonowicz, Arch. Metall. Mater. 58, No. 2 (2013), doi: 10.2478/amm-2013-0020
• [8] R.M. Kearsey, J. Tsang, S. Oppenheimer, E. Mcdevitt, JOM 64, 241 (2012), doi: 10.1007/s11837-012-0242-3
• [9] X. Xie, C. Xu, G. Wang, J. Dong, W.-D. Cao, R. Kennedy, in: Superalloys 718, 625, 706 and Derivatives 2005, Ed. E.A. Loria, The Minerals, Metals {& Materials Society, Pittsburgh 2005
• [10] W.D. Cao, R.L. Kennedy, in: Superalloys 2004, Seven Springs Conf., Seven Springs Conf, Eds. K.A. Green, T.M. Pollock, H. Harada, The Minerals, Metals {& Materials Society, Pittsburgh 2004
• [11] E.J. Pickering, H. Mathur, A. Bhowmik, O.M.D.M. Messé, J.S. Barnard, M.C. Hardy, R. Krakow, K. Loehnert, H.J. Stone, C.M.F. Rae, Acta Mater. 60 , 2757 (2012) ., doi: 10.1016/j.actamat.2012.01.042
• [12] P.C. Gilbert, J. Theor. Biol. 36, 105 (1972), doi: 10.1016/0022-5193(72)90180-4

Identifiers

DOI

10.12693/APhysPolA.131.1311