PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 131 | 5 | 1244-1249
Article title

Study on the Rayleigh Hysteresis Model and its Applicability in Modeling Magnetic Hysteresis Phenomenon in Ferromagnetic Materials

Content
Title variants
Languages of publication
EN
Abstracts
EN
The following paper presents the basis of a Rayleigh magnetic hysteresis model and the examples of its application for modeling the magnetic characteristics of ferromagnetic materials: ferrites and steels. The presented model allows one to simulate the shape of a magnetic hysteresis loop of the material for the given value of the magnetizing field in the so-called Rayleigh region, as well as to calculate basic magnetic parameters of the material like coercive field, magnetic remanence, and power loss. Four different ferromagnetic materials (two ferrites and two alloy steels) were chosen for the investigation. Each material was investigated within the range of low magnetizing fields, corresponding to the Rayleigh region. On the basis of obtained results, modeling of magnetic characteristics of the investigated materials was performed. Moreover, the range of magnetizing field where the Rayleigh model can be applied for these materials was investigated based on correlation coefficient between experimental results and modeling.
Keywords
Contributors
author
  • Institute of Metrology and Biomedical Engineering, Warsaw University of Technology, sw. A. Boboli 8, 02-525 Warsaw, Poland
author
  • Institute of Metrology and Biomedical Engineering, Warsaw University of Technology, sw. A. Boboli 8, 02-525 Warsaw, Poland
References
  • [1] R.C. O'Handley, Modern Magnetic Materials - Principles and Applications, Wiley, New York 2000
  • [2] D.C. Jiles, D.L. Atherton, IEEE Trans. Magn. 19, 2183 (1983), doi: 10.1109/TMAG.1983.1062594
  • [3] D.C. Jiles, D.L. Atherton, J. Magn. Magn. Mater. 61, 48 (1986), doi: 10.1016/0304-8853(86)90066-1
  • [4] R. Szewczyk, A. Bieńkowski, J. Salach, J. Magn. Magn. Mater. 320, E1049 (2008), doi: 10.1016/j.jmmm.2008.04.107
  • [5] R.G. Harrison, IEEE Trans. Magn. 39, 950 (2003), doi: 10.1109/TMAG.2003.808590
  • [6] R.G. Harrison, IEEE Trans. Magn. 45, 1922 (2009), doi: 10.1109/TMAG.2008.2008010
  • [7] F. Liorzou, B. Phelps, D.L. Atherton, IEEE Trans. Magn. 36, 418 (2002), doi: 10.1109/20.825802
  • [8] P. Frydrych, R. Szewczyk, M. Nowicki, Advances in Intelligent Systems and Computing 440, 827 (2016), doi: 10.1007/978-3-319-29357-8_73
  • [9] J.H. Chan, A. Vladimirescu, X.C. Gao, P. Liebman, J. Valainis, IEEE Trans. Comput.-Aided Des. Integr. Circuits Syst. 10, 476 (1991), doi: 10.1109/43.75630
  • [10] D. Nitzan, IEEE Trans. Nucl. Sci. 15, 285 (1968), doi: 10.1109/TNS.1968.4325059
  • [11] M. Nałęcz, J. Jaworski, Miernictwo Magnetyczne, Wydawnictwo Naukowo-Techniczne, Warszawa 1968
  • [12] M.M. Ponjavic, M.R. Duric, IEEE Sens. J. 7, 1546 (2007), doi: 10.1109/JSEN.2007.908234
  • [13] D.C. Jiles, Introduction to Magnetism and Magnetic Materials, Chapman and Hall/CRC, London 1998
  • [14] Lord Rayleigh, Philos. Mag. 23, 225 (1887), doi: 10.1080/14786448708628000
  • [15] B. Bertotti, Hysteresis in Magnetism for Physicists, Materials Scientists and Engineers, Academic Press, San Diego 1998, doi: 10.1016/B978-0-12-093270-2.50071-4
  • [16] C.B. Carter, M.G. Norton, Ceramic Materials: Science and Engineering, Springer, Berlin 2007, doi: 10.1007/978-1-4614-3523-5
  • [17] Stainless steels. List of stainless steels, EN 10088-1:2014 http://razi-foundation.com/Portals/0/Files/standards/BS%20EN%2010088-1%202014.pdf?ver=1395-08-26-190608-753
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv131n512kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.