PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 131 | 5 | 1199-1203
Article title

Mechanical Properties of Soft Magnetic Composites at the Temperature of Liquid Nitrogen

Content
Title variants
Languages of publication
EN
Abstracts
EN
Soft magnetic composites are used in a wide range of applications working in different environmental conditions, between others, in different temperatures. Nowadays, devices often work in cryogenic temperatures. The paper shows influence of liquid nitrogen temperature on mechanical properties of soft magnetic composites prepared from ABC100.30 powder bonded by epoxy resin. Mechanical properties of samples were measured in room and liquid nitrogen temperatures. Compressive strength and transverse rapture strength increase with decreasing temperature. This type of soft magnetic composite can be applied in magnetic circuits of devices working in cryogenic temperatures. The results of measurement show that new devices, especially electric machines, working in these temperatures can be designed with higher mechanical loadings than devices working at room temperature.
Keywords
Contributors
author
  • Tele & Radio Research Institute, Ratuszowa 11, 03-450 Warsaw, Poland
author
  • Tele & Radio Research Institute, Ratuszowa 11, 03-450 Warsaw, Poland
author
  • Tele & Radio Research Institute, Ratuszowa 11, 03-450 Warsaw, Poland
References
  • [1] B. Ślusarek, Prz. Elektrotechniczny 86, 16 (2010)
  • [2] J.A. Bas, J.A. Calero, M.J. Dougan, J. Magn. Magn. Mater. 254-255, 391 (2003), doi: 10.1016/S0304-8853(02)00934-4
  • [3] M.R. Marucci, K.S. Narasimhan, in: Proc. Euro PM2011 Congress & Exhibition, Barcelona (Spain), 2011, p. 285
  • [4] H. Shokrollahi, K. Janghorban, J. Mater. Process. Technol. 189, 1 (2007), doi: 10.1016/j.jmatprotec.2007.02.034
  • [5] L. Frayman, S. Quinn, R. Quinn, D. Green, F. Hanejko, Powder Metall. 58, 335 (2015), doi: 10.1080/00325899.2015.1133080
  • [6] S.H. Lee, Y.J. Kim, K.S. Lee, S.J. Kim, J. Magn. 20, 444 (2015), doi: 10.4283/JMAG.2015.20.4.444
  • [7] A. Schoppa, P. Delarbre, IEEE Trans. Magn. 50, 2004304 (2014), doi: 10.1109/TMAG.2013.2290135
  • [8] T. Ishikawa, Y. Sato, N. Kurita, IEEE Trans. Magn. 50, 8105304 (2014), doi: 10.1109/TMAG.2014.2334706
  • [9] L. Długiewicz, J. Kołowrotkiewicz, B. Ślusarek, W. Szeląg, in: Proc. 21th Symp. on Power Electronics, Electrical Drives, Automation and Motion - SPEEDAM, Sorrento (Italy), Eds.: E. Pagano, E. Yamada, IEEE, 2012, p. 822
  • [10] D. Kapelski, B. Jankowski, M. Przybylski, B. Ślusarek, Techn. Trans. Electr. Eng. 112, 281 (2015), doi: 10.4467/2353737XCT.15.049.3849
  • [11] J. Kołowrotkiewicz, M. Barański, W. Szeląg, L. Długiewicz, Compel - Int. J. Comp. Math. Electr. Electron. Eng. 26, 952 (2007), doi: 10.1108/03321640710756294
  • [12] Y. Abe, A.A. Nakagawa, M. Watada, S. Torri, K. Yamane, D. Ebihara, IEEE Trans. Magn. 32, 5025 (1996), doi: 10.1109/20.539364
  • [13] I.R. Walker, Rev. Sci. Instrum. 64, 814 (1993), doi: 10.1063/1.1144165
  • [14] B. Ślusarek, M. Przybylski, in: Proc. 13th Symp. on Fundamental Problems of Power Electronics Electromechanics and Mechatronics - PPEEm, Wisła (Poland), Ed. K. Kluszczyński, Polish Scientific Society for Theoretical and Applied Electrical Engineering, 2009, p. 226
  • [15] B. Jankowski, D. Kapelski, M. Karbowiak, M. Przybylski, B. Ślusarek, Powder Metall. 57, 155 (2014), doi: 10.1179/1743290114Y.0000000086
  • [16] B. Ślusarek, J. Gromek, M. Przybylski, B. Jankowski, D. Kapelski, M. Karbowiak, in: Proc. 15th Int. Symp. on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering - ISEF, Funchal (Portugal), Eds.: C.L. Antunes, S. Wiak, Portuguese Association for the Development of Electrical Engineering (APDEE), Coimbra 2011
  • [17] B. Ślusarek, P. Gawryś, M. Przybylski, Stud. Appl. Electromagn. Mech. 30, 34 (2008), doi: 10.3233/978-1-58603-895-3-34
  • [18] D. Kapelski, B. Jankowski, M. Przybylski, B. Ślusarek, Arch. Metall. Mater. 60, 1323 (2015), doi: 10.1515/amm-2015-0123
  • [19] M. Urbaniak, Polimery 56, 240 (2011)
  • [20] J. Rieger, Polym. Test 20, 199 (2001), doi: 10.1016/S0142-9418(00)00023-4
  • [21] A. Hale, C.W. Macosko, H.E. Bair, Macromolecules 24, 2610 (1991), doi: 10.1021/ma00009a072
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv131n501kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.