Magnetic Amorphous Micro-Force Sensor

• Authors: M. Nowicki , M. Kachniarz , A. Juś , T. Charubin , W. Radzikowska-Juś
• Languages of publication: EN

Abstracts

EN

In this paper the innovative method of microforce measurement based on air gap influence on magnetic circuits properties is presented. Magnetic ribbon core with air gap is put under transverse compressive stress perpendicular to the magnetic field direction generated by low-mass calibration weight. Change of the air gap induced by the force acting on the core causes change of its magnetic parameters. The possibility of utilization of various magnetic amorphous materials is investigated. Obtained results indicate a possibility of application of the developed sensor in microforce measurements.

Keywords

EN

07.10.Pz; 75.50.Kj

Discipline

• 75.50.Kj: Amorphous and quasicrystalline magnetic materials
• 07.10.Pz: Instruments for strain, force, and torque

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2017
• Volume: 131
• Issue: 4
• Pages: 1180-1182

Dates

published

2017-04

Contributors

author

M. Nowicki

• Institute of Metrology and Biomedical Engineering, Warsaw University of Technology, sw. A. Boboli 8, 02-525 Warsaw, Poland

author

M. Kachniarz

• Industrial Research Institute for Automation and Measurements, Al. Jerozolimskie 202, 02-486 Warsaw, Poland

author

A. Juś

• Institute of Metrology and Biomedical Engineering, Warsaw University of Technology, sw. A. Boboli 8, 02-525 Warsaw, Poland

author

T. Charubin

• Institute of Metrology and Biomedical Engineering, Warsaw University of Technology, sw. A. Boboli 8, 02-525 Warsaw, Poland

author

W. Radzikowska-Juś

• Faculty of Civil Engineering and Geodesy, Military University of Technology, ≥n. S. Kaliskiego 2, 00-908 Warsaw, Poland

References

• [1] Handbook on Experimental Mechanics, Ed. A.S. Kobayashi, Prentice-Hall, Englewood Cliffs (NJ) 1993
• [2] G. Gautschi, Piezoelectric Sensors, Springer, Berlin 2002, Ch. 5, p. 73, doi: 10.1007/978-3-662-04732-3_5
• [3] S.S. Rao, M. Sunar, Appl. Mech. Rev. 4, 113 (1994), doi: 10.1115/1.3111074
• [4] S. Dabrowski, P. Bazydlo, R. Szewczyk, in: Progress in Automation, Robotics and Measuring Techniques, Eds. R. Szewczyk, C. Zielinski, M. Kaliczyńska, Springer, Berlin 2015, p. 49, doi: 10.1007/978-3-319-15835-8_6
• [5] P. Nowak, A. Juś, R. Szewczyk, R. Pijarski, M. Nowicki, W. Winiarski, in: Mechatronics - Ideas for Industrial Application, Eds. J. Awrejcewicz, R. Szewczyk, M. Trojnacki, M. Kaliczynska, Springer, Berlin 2015, p. 345, doi: 10.1007/978-3-319-10990-9_32
• [6] J. Salach, A. Bienkowski, R. Szewczyk, J. Magn. Magn. Mater. 316, 607 (2007), doi: 10.1016/j.jmmm.2007.03.035
• [7] A. Bienkowski, R. Szewczyk, J. Salach, Acta Phys. Pol. A 118, 1008 (2010), doi: 10.12693/APhysPolA.118.1008
• [8] A. Bienkowski, R. Szewczyk, T. Kulik, J. Ferenc, J. Salach, J. Magn. Magn. Mater. 304, 624 (2006), doi: 10.1016/j.jmmm.2006.02.196
• [9] J. Bydzovsky, L. Kraus, P. Svec, M. Pasquale, J. Magn. Magn. Mater. 272-274, 1743 (2004), doi: 10.1016/j.jmmm.2003.12.414
• [10] H. Chiriac, M. Pletea, E. Hristoforou, Mater. Sci. Eng. A 375-377, 1024 (2004), doi: 10.1016/j.msea.2003.10.045
• [11] J.M. Barandiaran, J. Gutierrez, Sens. Actuat. A 59, 38 (1997), doi: 10.1016/S0924-4247(97)80145-8

Identifiers

DOI

10.12693/APhysPolA.131.1180