PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 131 | 4 | 1168-1170
Article title

Utilization of Eddy Current Tomography in Automotive Industry

Content
Title variants
Languages of publication
EN
Abstracts
EN
Paper presents utilized innovative setup for eddy current tomography and possibility of its utilization in automotive industry. Described tomography setup is designed for testing axisymmetric objects thus motor valve was selected for exemplary testing. Tests were conducted on motor valve in original state. Afterwards reference defect was created on element and measurements were repeated. Significant difference between tests results were observed, thus potential for utilization in automotive industry was confirmed. Finite element method simulations were applied in order to confirm the measurement results. Calculations were conducted in open-source finite element method software, which solves Maxwell equations in the A-V form. Modelling results confirm possibility of finite element method-based inverse tomography transformation.
Keywords
EN
Year
Volume
131
Issue
4
Pages
1168-1170
Physical description
Dates
published
2017-04
Contributors
author
  • Institute of Metrology and Biomedical Engineering, Warsaw University of Technology, sw. A. Boboli 8, 02-525 Warsaw, Poland
author
  • Institute of Metrology and Biomedical Engineering, Warsaw University of Technology, sw. A. Boboli 8, 02-525 Warsaw, Poland
author
  • Industrial Research Institute for Automation and Measurements, Al. Jerozolimskie 202, 02-486 Warsaw, Poland
author
  • Institute of Metrology and Biomedical Engineering, Warsaw University of Technology, sw. A. Boboli 8, 02-525 Warsaw, Poland
References
  • [1] D. Premel, A. Mohammad-Djafari, IEEE Trans. Magn. 31, 2000 (1995), doi: 10.1109/20.376435
  • [2] M. Soleimani, J. Electromagnet. Wave 23, 785 (2009), doi: 10.1163/156939309788019822
  • [3] J. Salach, Jamris 8, 11 (2014), doi: 10.14313/JAMRIS_4-2014/31
  • [4] R. Szewczyk, J. Salach, J. Ruokolainen, P. Raback, M. Nowicki, in: Proc. 20 th Int. Conf. on Applied Physics of Condensed Matter (APCOM2014), Eds. J. Vajda, I. Jamnicky, 2014, p. 183
  • [5] A. Bossavit, IEE Proc. A 135, 493 (1988), doi: 10.1049/ip-a.1988.0077
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv131n4183kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.