Additional Modification of Thermomagnetic Properties of Objects of Low Relative Permeability in Electromagnetic Field

• Authors: D. Medveď , J. Zbojovský , M. Pavlík , S. Ilenin , Zs. Čonka , M. Kanálik , I. Kolcunová , A. Mészáros , L. Beňa , M. Kolcun
• Languages of publication: EN

Abstracts

EN

This paper presents the characteristics of the foodstuff heating phenomenon using induction heating process by an induction cooker. The simulation setup was prepared according to the proposed magnetic material and configuration of the pot and induction cooker. The material properties of pot were varied among the several alternatives. The helical coil was designed on the base of the limitation of the induction cooker size and given number of coil turns and coil tube diameter with specific supplied electric current density. The data from the simulation analysis have to determine the enhancing of the highest heat transfer from induction cooker into pot. These data led to the modification of the material and geometrical properties of the pot in accordance to a minimum heating time and enhanced safety operation, especially close to unshielded magnetic objects.

Keywords

EN

44.05.+e

Discipline

• 44.05.+e: Analytical and numerical techniques

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2017
• Volume: 131
• Issue: 4
• Pages: 1138-1140

Dates

published

2017-04

Contributors

author

D. Medveď

• Technical University of Košice, Faculty of Electrical Engineering and Informatics, Department of Electric Power Engineering, Mäsiarska 74, 042 01 Košice, Slovak Republic

author

J. Zbojovský

• Technical University of Košice, Faculty of Aeronautics, Department of Avionics, Rampová 7, 041 21 Košice, Slovak Republic

author

M. Pavlík

• Technical University of Košice, Faculty of Electrical Engineering and Informatics, Department of Electric Power Engineering, Mäsiarska 74, 042 01 Košice, Slovak Republic

author

S. Ilenin

• Technical University of Košice, Faculty of Electrical Engineering and Informatics, Department of Electric Power Engineering, Mäsiarska 74, 042 01 Košice, Slovak Republic

author

Zs. Čonka

• Technical University of Košice, Faculty of Electrical Engineering and Informatics, Department of Electric Power Engineering, Mäsiarska 74, 042 01 Košice, Slovak Republic

author

M. Kanálik

• Technical University of Košice, Faculty of Electrical Engineering and Informatics, Department of Electric Power Engineering, Mäsiarska 74, 042 01 Košice, Slovak Republic

author

I. Kolcunová

• Technical University of Košice, Faculty of Electrical Engineering and Informatics, Department of Electric Power Engineering, Mäsiarska 74, 042 01 Košice, Slovak Republic

author

A. Mészáros

• Technical University of Košice, Faculty of Electrical Engineering and Informatics, Department of Electric Power Engineering, Mäsiarska 74, 042 01 Košice, Slovak Republic

author

L. Beňa

• Technical University of Košice, Faculty of Electrical Engineering and Informatics, Department of Electric Power Engineering, Mäsiarska 74, 042 01 Košice, Slovak Republic

author

M. Kolcun

• Technical University of Košice, Faculty of Electrical Engineering and Informatics, Department of Electric Power Engineering, Mäsiarska 74, 042 01 Košice, Slovak Republic

References

• [1] L. Koller, B. Novak, G. Tevan, IEEE Trans. Power Deliv. 23, 221 (2008), doi: 10.1109/TPWRD.2007.905806
• [2] L. Koller, B. Novak, G. Tevan, IEEE Trans. Power Deliv. 23, 228 (2008), doi: 10.1109/TPWRD.2007.905807
• [3] J. Zbojovský, A. Mészáros, D. Medveď, in: Proc. 2014 15th Int. Sci. Conf. on Electric Power Engineering, EPE, 2014, p. 257, doi: 10.1109/EPE.2014.6839510
• [4] M. Kosterec, J. Kurimský, M. Folta, S. Bucko, Z. Čonka, Proc. 8th Int. Sci. Symp. Electrical Power Engineering, Elektroenergetika 2015, p. 564 http://toc.proceedings.com/27673webtoc.pdf
• [5] M. Pavlík, I. Kolcunová, B. Dolník, J. Kurimský, A. Mészáros, D. Medveď, M. Kolcun, J. Zbojovský, Acta Electr. Inf. 13, 12 (2013) http://www.aei.tuke.sk/papers/2013/3/03_Pavlik.pdf

Identifiers

DOI

10.12693/APhysPolA.131.1138