The Grey-Based Taguchi Method: Optimisation of Drilling of Hybrid Aluminum Matrix Composites

• Authors: M. Ay , Y. Altunpak , S. Hartomacıoğlu
• Languages of publication: EN

Abstracts

EN

The aim of this study was to investigate the influence of cutting parameters and effect of graphite rate on cutting force and surface roughness in drilling of Al/20%SiC/5%Gr, Al/20%SiC/7.5%Gr and Al /20%SiC/10%Gr hybrid composites, fabricated by vortex method. The drilling tests are conducted with diamond-like-carbon coated cutting tools. The Grey relational analysis based Taguchi optimization method was selected to determine the optimum cutting conditions. The results show that the spindle speed (4500 rpm), the rate of graphite (10%) and feed (0.1 mm/rev) were found to be significant parameters for surface roughness and cutting force. The predicted values from the developed model and experimental values are found to be very similar in this study.

Keywords

EN

81.05.-t

Discipline

• 81.05.-t: Specific materials: fabrication, treatment, testing, and analysis(for superconducting materials, see 74.70.-b, and 74.72.-h; for magnetic materials, see 75.50.-y; for optical materials, see 42.70.-a; for dielectric materials, see 77.84.-s; for disperse systems and complex fluids, see 82.70.-y; see also 82.75.-z Molecular sieves, zeolites, clathrates, and other complex solids; for materials properties, see sections 60 and 70)

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2017
• Volume: 131
• Issue: 3
• Pages: 551-554

Dates

published

2017-03

Contributors

author

M. Ay

• Marmara University, Faculty of Technology, Department of Mechanical Engineering, 34722, Istanbul, Turkey

author

Y. Altunpak

• Abant Izzet Baysal University, Faculty of Engineering and Architecture, Mechanical Engineering, 14280, Bolu, Turkey

author

S. Hartomacıoğlu

• Marmara University, Faculty of Technology, Department of Mechanical Engineering, 34722, Istanbul, Turkey

References

• [1] Y. Altunpak, M. Ay, S. Aslan, Int. J. Adv. Manuf. Technol. 60, 513 (2012), doi: 10.1007/s00170-011-3644-4
• [2] S.V. Prasad, R. Asthana, Tribol. Lett. 17, 445 (2004), doi: 10.1023/B:TRIL.0000044492.91991.f3
• [3] M.T. Hayajneh, A.M. Hassan, A.T. Mayyas, J. Alloy Comp. 478, 559 (2009), doi: 10.1016/j.jallcom.2008.11.155
• [4] S. Basavarajappa, G. Chandramohan, A. Mahadevan, M. Thangavelu, R. Subramanian, P. Gopalakrishnan, Wear 262, 1007 (2007), doi: 10.1016/j.wear.2006.10.016
• [5] D. Gultekin, M. Uysal, S. Aslan, M. Alaf, M.O. Guler, H. Akbulut, Wear 270, 73 (2010), doi: 10.1016/j.wear.2010.09.001
• [6] N. Kumar, G. Gautam, R.K. Gautam, A. Mohan, S. Mohan, J. Inst. Eng. India Ser. D 97, 233 (2016), doi: 10.1007/s40033-015-0091-7
• [7] A. Premnath, Particul. Sci. Technol. 34, 707 (2016), doi: 10.1080/02726351.2015.1112327
• [8] S.C. Sharma, B.M. Girish, R.S. Kulkarni, R. Kamath, HUKHUKNML Tech J. 38, 127 (1996)
• [9] S. Basavarajappa, G. Chandramohan, J.P. Davim, Int. J. Mach. Tool. Manufact. 47, 92 (2007), doi: 10.1016/j.ijmachtools.2006.02.008
• [10] A.M. Raj, S.L. Das, K. Palanikumarr, Indian J. Sci. Technol. 6, 5002 (2013)
• [11] M. El-Gallab, M. Sklad, J. Mater. Proc. Technol. 83, 277 (1998), doi: 10.1016/S0924-0136(98)00072-7
• [12] T. Rajmohan, K. Palanikumar, M. Kathirvel, Trans. Nonferrous Met. Soc. China 22, 1286 (2012), doi: 10.1016/S1003-6326(11)61317-4
• [13] A.M. Ali, E.Y.T. Adesta, D. Augusman, S.N.M. Badari, M.H.F. Al-Hazza, Asian J. Scient. Res. 4, 255 (2011), doi: 10.3923/AJSR.2011.255.263
• [14] M. Ay, Y. Altunpak, J. Eng. Fundament. 2, 42 (2015), doi: 10.17530/jef.15.17.2.2
• [15] G. Tosun, Int. J. Adv. Manuf. Technol. 55, 477 (2011), doi: 10.1007/s00170-010-3103-7
• [16] W.H. Yang, Y.S. Tarng, Int. J. Mater. Process Technol. 84, 122 (1998), doi: 10.1016/S0924-0136(98)00079-X
• [17] T. Chung-Chen, H. Honk, Int. J. Mater. Processing Technol. 123, 1 (2002), doi: 10.1016/S0924-0136(01)01152-9
• [18] K. Venkatesan, R. Ramanujam, V. Saxena, N. Chawdhury, V. Choudhary, ARPN J. Eng. Appl. Sci. 9, 250 (2014) http://www.arpnjournals.com/jeas/research_papers/rp_2014/jeas_0314_1023.pdf
• [19] M. Kurt, S. Hartomacioğlu, B. Mutlu, U. Köklü, Mater. Technol. 46, 205 (2012) http://mit.imt.si/Revija/izvodi/mit123/kurt.pdf
• [20] H. Ravikumar, P.L. Arun, S. Thileepan, Int. J. ChemTech. Res. 8, 292 (2015) http://sphinxsai.com/2015/ch_vol8_no12/1/(292-303)V8N12CT.pdf

Identifiers

DOI

10.12693/APhysPolA.131.551