Applying a Numerical Model to Obtain the Temperature Distribution while Machining

• Authors: N. Melzi , M. Temmar , M. Ouali
• Languages of publication: EN

Abstracts

EN

The turning process is one of the best used processes in the mechanical industry. Therefore, the choice of the cutting parameters is very important in order to obtain a good machined surface quality. In this study, an analytical model and a modeling of the contact of the cutting tool with the work piece are developed for an orthogonal cutting process with a thermal analysis at the contact. The main aim is to predict the temperature while machining. By using the high-speed machining, we notice that the greater part of the heat, generated by the cutting process, is discharged into the cutting tool and the work piece. Indeed, when the cutting parameters, such as the cutting speed or the feed increase, the temperature increases too.

Keywords

EN

07.10.-h

Discipline

• 07.10.-h: Mechanical instruments and equipment

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2017
• Volume: 131
• Issue: 3
• Pages: 504-506

Dates

published

2017-03

Contributors

author

N. Melzi

• Structural Mechanics Research Laboratory, Department of Mechanical Engineering, University Blida 1, Algeria

author

M. Temmar

• Structural Mechanics Research Laboratory, Department of Mechanical Engineering, University Blida 1, Algeria

author

M. Ouali

• Structural Mechanics Research Laboratory, Department of Mechanical Engineering, University Blida 1, Algeria

References

• [1] A. Molinari, D. Dudzinski, C.R. Academic. Sci. 315, 399 (1992)
• [2] A. Moufki, A. Molinariand, D. Dudzinski, J. Mechanic. Phys. Solids 46, 2103 (1998), doi: 10.1016/S0022-5096(98)00032-5
• [3] K.S. Ashok, P.C. Mishra, Int. J. Industrial Engin. Comput. 5, 407 (2014), doi: 10.5267/j.ijiec.2014.4.002
• [4] S. Basak, U.S. Dixit, J.P. Davim, Proc. Mechan. Engin. Part B: J. Engin. Manufact. 221, 987 (2007), doi: 10.1243/09544054JEM737
• [5] P.S. Bapat, P.D. Dhikale, S.M. Shinde, A.P. Kulkarni, S.S. Chinchanikar, in: 4th Int. Conf. Materials Processing and Characterization, Materials Today: Proceedings 2, 2015, p. 1907, doi: 10.1016/j.matpr.2015.07.150

Identifiers

DOI

10.12693/APhysPolA.131.504