Enhanced Mechanical Performance of Aluminum Glass Fiber Reinforced Foam Material by Cu Modification

• Authors: A. Ertürk , I. Aydın
• Languages of publication: EN

Abstracts

EN

Glass fiber-reinforced aluminum foam and its modified forms, using 1 and 3 wt.% of Cu, were produced by powder sintering process, using spherical carbamide particles as space holders. The foams with 40 and 60 vol.% porosity fractions were successfully produced after water leaching and sintering procedures. Compression test was performed on foam samples to compare both, the compressive properties and energy absorption behavior of them. The composite foam samples with Cu modification have shown a higher compressive strength than the parent material foam. The average plateau stress and energy absorption capacity of foams produced in this study, achieved via utilizing 3 wt.% Cu, were 7.06 MPa and 3.51 MJ/m³, respectively.

Keywords

EN

81.05.Bx; 81.05.Rm; 81.20.Ev; 81.70.Bt

Discipline

• 81.20.Ev: Powder processing: powder metallurgy, compaction, sintering, mechanical alloying, and granulation
• 81.05.Rm: Porous materials; granular materials(for granular superconductors, see 74.81.Bd)
• 81.05.Bx: Metals, semimetals, and alloys
• 81.70.Bt: Mechanical testing, impact tests, static and dynamic loads(see also 62.20.M- Structural failure of materials; 46.50.+a Fracture mechanics, fatigue, and cracks)

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2017
• Volume: 131
• Issue: 3
• Pages: 470-473

Dates

published

2017-03

Contributors

author

A. Ertürk

• Kocaeli University, Ford Otosan Ihsaniye Vocational School of Automotive, Turkey

author

I. Aydın

• Kocaeli University, Department of Mechanical Engineering, Turkey

References

• [1] M.F. Ashby, A.G. Evans, N.A. Fleck, L.J. Gibson, J.W. Hutchinson, H.N.G. Wadley, Metal Foams: A Design Guide, Butterworth Heinemann, Woburn 2000, doi: 10.1016/B978-075067219-1/50006-4
• [2] J. Banhart, Prog. Mater. Sci. 46, 559 (2001), doi: 10.1016/s0079-6425(00)00002-5
• [3] A. T. Ertürk, Acta Phys. Pol. A 129, 592 (2016), doi: 10.12693/aphyspola.129.592
• [4] M.R. Moradi, A. Moloodi, A. Habibolahzadeh, Procedia Mater. Sci. 11, 553 (2015), doi: 10.1016/j.mspro.2015.11.059
• [5] M. Garcia-Avila, M. Portanova, A. Rabiei, Compos. Struct. 125, 202 (2015), doi: 10.1016/j.compstruct.2015.01.031
• [6] Z.K. Cao, B. Li, G.C. Yao, Y. Wang, Mater. Sci. Eng. A 486, 350 (2008), doi: 10.1016/j.msea.2007.09.013
• [7] A. Antenucci, S. Guarino, V. Tagliaferri, N. Ucciardello, Mater. Des. 59, 124 (2014), doi: 10.1016/j.matdes.2014.03.004
• [8] C. Devivier, V. Tagliaferri, F. Trovalusci, N. Ucciardello, Mater. Des. 86, 272 (2015), doi: 10.1016/j.matdes.2015.07.078
• [9] Y. Sun, R. Burgueno, W. Wang, I. Lee, Mater. Sci. Eng. A 613, 340 (2014), doi: 10.1016/j.msea.2014.06.108
• [10] Y. Mu, G. Yao, Z. Cao, H. Luo, G. Zu, Scr. Mater. 64, 61 (2011), doi: 10.1016/j.scriptamat.2010.09.005
• [11] Y. Mu, G. Yao, G. Zu, Z. Cao, Mater. Des. 31, 4423 (2010), doi: 10.1016/j.matdes.2010.04.025
• [12] Y. Mu, G. Zu, Z. Cao, G. Yao, Q. Wang, Scr. Mater. 68, 459 (2013), doi: 10.1016/j.scriptamat.2012.11.021

Identifiers

DOI

10.12693/APhysPolA.131.470