PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 131 | 3 | 443-447
Article title

Investigation of Mechanical Properties of Fe-Based Metal Matrix Composites by Warm Compaction for Gear Production

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
In this study, mechanical behavior of iron-based (Fe-0.8C-2.0Cu-4.5Ni-1.8Mo-1.0B (wt.%)) metal matrix composite synthesized by powder metallurgy was investigated for gear production. Metal matrix composite has been produced by warm compaction, followed by free sintering in controlled Ar gas atmosphere. Green composite was produced under pressure of 650 MPa at 160°C. The green products have been sintered at various temperatures (1050, 1150 and 1250°C) and for various time periods (30, 60 and 90 min). Mechanical tests (hardness and wear tests) have been conducted. The microstructure and the worn surfaces of the samples have been examined under scanning electron microscope and analyzed by energy dispersive spectroscopy and X-ray diffraction method. The results have shown that hardness and wear resistance of the samples increase with increasing sintering temperature and time. Effect of sintering temperature is greater than that of sintering time. The highest hardness and wear resistance have been obtained in the composite sample produced at 1250°C for 90 min.
Keywords
EN
Publisher

Year
Volume
131
Issue
3
Pages
443-447
Physical description
Dates
published
2017-03
Contributors
author
  • ESTAŞ Eksantrik San. ve Tic. A.Ş. Sivas, Turke, 58060, Sivas, Turkey
author
  • Cumhuriyet University Department of Metallurgical and Materials Engineering, 58140, Sivas, Turkey
References
  • [1] J. Wang, H. Danninger, Wear 222, 49 (1998), doi: 10.1016/S0043-1648(98)00279-8
  • [2] A. Simchi, A.A. Nojoomi, Adv. Powd. Metall. 2013, 86 (2013), doi: 10.1533/9780857098900.1.86
  • [3] K.S. Narasimhan, Mater. Chem. Phys. 67, 56 (2001), doi: 10.1016/S0254-0584(00)00420-X
  • [4] A. Benner, P. Beiss, Mat.-wiss. u. Werkstofftech. 35, 663 (2004), doi: 10.1002/mawe.200400792
  • [5] A. Benner, P. Beiss, Euro PM2000 Conf. Material and Processing Trends for PM Components in Transportation, Proceedings, Munich, 2000, p. 101
  • [6] E. Robert-Perron, C. Blais, S. Pelletier, Y. Thomas, Metall. Mater. Trans. A 38, 1337 (2007), doi: 10.1007/s11661-007-9187-5
  • [7] E. Robert-Perron, C. Blais, S. Pelletier, Y. Thomas, Metall. Mater. Trans. A 38, 1330 (2007), doi: 10.1007/s11661-007-9191-9
  • [8] L. Tremblay, F. Chagnon, Y. Thomas, M. Gagné, SAE Technical Paper 2001, 2001-01-0399 (2001), doi: 10.4271/2001-01-0399
  • [9] M. Wu, G. Shu, S. Chang, B. Lin, Metall. Mater. Trans. A 45, 3866 (2014), doi: 10.1007/s11661-014-2356-4
  • [10] P. Kumar Bardhan, S. Patra, G. Sutradhar, Mater. Sci. Applic. 1, 152 (2010), doi: 10.4236/msa.2010.13024
  • [11] Z.Y. Xiao, M.Y. Ke, L. Fang, M. Shao, Y.Y. Li, J. Mater. Proc. Technol. 209, 4527 (2009), doi: 10.1016/j.jmatprotec.2008.10.018
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv131n331kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.