PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 131 | 3 | 437-439
Article title

Fabrication of Functional Graded Al2124 Composite Reinforced with Al₂O₃ Particles

Content
Title variants
Languages of publication
EN
Abstracts
EN
The composite materials formed by powder metallurgy are mostly used in industry due to their excellent properties such as low density, high strength, and hardness. The aim of this study is to produce functional graded Al material reinforced with macro-sized Al₂O₃. To fabricate the aluminum matrix composite, commercial Al 2124 aluminum alloy powder (from Gürel Makina), which is used in aerospace and defense industries, was chosen as a matrix material. Powder metallurgy was used to produce the functional graded material because it allows an easy incorporation of reinforcement phase into the matrix. The sintered samples were characterized using optical microscopy, SEM, and X-Ray diffraction analysis. The results show that functional graded material structure and the transition interlayers were achieved by the presented process.
Keywords
EN
Contributors
  • Sakarya University, Faculty of Technology, Department of Metallurgical and Materials Engineering
author
  • Sakarya University, Faculty of Technology, Department of Metallurgical and Materials Engineering
author
  • Bulent Ecevit University Faculty of Engineering Department of Metallurgical and Materials Engineering
References
  • [1] D. Garbiec, M. Jurczyk, N. Levintant-Zayonts, T. Mościcki, Arch. Civ. Mech. Eng. 15, 933 (2015), doi: 10.1016/j.acme.2015.02.004
  • [2] X. Zhu, J. Yu, X. Wang, Transactions of Nonferrous Metals Society of China 22, 1686 (2012), doi: 10.1016/S1003-6326(11)61374-5
  • [3] K. Konopka, M. Szafran, J. Mater. Proc. Technol. 175, 266 (2006), doi: 10.1016/j.jmatprotec.2005.04.046
  • [4] V. Laurent, C. Rado, N. Eustathopoulos, Mater. Sci. Eng. A 205, 1 (1996), doi: 10.1016/0921-5093(95)09896-8
  • [5] M.S. EL-Wazery, A.R. EL-Desouky, Mater. Environ. Sci. 6, 1369 (2015)
  • [6] S. Suresh, A. Mortensen, Int. Mater. Rev. 42, 85 (1997), doi: 10.1179/095066097790093217
  • [7] H. Izadi, A. Nolting, C. Munro, D.P. Bishop, K.P. Plucknett, A.P. Gerlich, J. Mater. Proc. Technol. 213, 1900 (2013), doi: 10.1016/j.jmatprotec.2013.05.012
  • [8] M.M. Rasheedat, T. Esther, M. Akinlabi, M. Shukla, S. Pityana, Proceedings of the World Congress on Engineering, Vol III, 2012, p. 2
  • [9] T. Hirai, M. Sasaki, M. Niino, J. Japan Soc. Mater. Sci. 36, 1205 (1987), doi: 10.2472/jsms.36.1205
  • [10] K.M. McHugha, Y. Linb, Y. Zhoub, S.B. Johnsonb, J.-P. Delplanque, E.J. Lavernia, Mater. Sci. Eng. A 477, 26 (2008), doi: 10.1016/j.msea.2007.04.130
  • [11] F. Piyadeh, H.P. Abdollah, M. Lieblich, Rev. Metal. 50, 1 (2014), doi: 10.3989/revmetalm.030
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv131n329kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.