PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 131 | 3 | 392-396
Article title

Characterization of Cu/Ag/Eu/Hydroxyapatite Composites Produced by Wet Chemical Precipitation

Content
Title variants
Languages of publication
EN
Abstracts
EN
In the first part of this study hydroxyapatite was prepared synthetically through classical wet precipitation, using Ca(NO₃)₂·4H₂O (calcium nitrate tetrahydrate) as calcium source and HgN₂O4P as phosphate source. In the second part of the study HA compounds were prepared with different ratios (0.5, 1, 2, 5, 10 and 25 wt.%) of antibacterial materials like copper (Cu), silver (Ag) and europium (Eu), using the same wet precipitation method. The prepared pure HA material was utilized as the control group for comparison with Cu/Ag/Eu/HA composites. Studies of X-ray diffraction, FTIR spectroscopy, scanning electron microscopy, equipped with energy dispersive X-ray analysis were performed. The aim of this study was to investigate Cu/Ag/Eu/HA composites and the effect of metals on HA biomaterials, used as scaffold materials in bone disease treatment.
Keywords
EN
Contributors
author
  • Kanuni Sultan Suleyman Training and Research Hospital, Department of Orthopaedics and Traumatology, Kucukcekmece, Halkali 34303, Istanbul, Turkey
author
  • Marmara University, Department of Bioengineering, Faculty of Engineering, Ziverbey, Kadikoy 34722, Istanbul, Turkey
author
  • Marmara University, Department of Electric Education, Technical Education School, Ziverbey, Kadikoy 34722, Istanbul, Turkey
  • Marmara University, Advanced Nanomaterials Research Laboratory, Faculty of Technology, Ziverbey, Kadikoy 34722, Istanbul, Turkey
author
  • Marmara University, Department of Mechanical Engineering, Faculty of Technology, Ziverbey, Kadikoy 34722, Istanbul, Turkey
author
  • Marmara University, Advanced Nanomaterials Research Laboratory, Faculty of Technology, Ziverbey, Kadikoy 34722, Istanbul, Turkey
  • Marmara University, Department of Metallurgy and Materials Engineering, Faculty of Technology, Ziverbey, Kadikoy 34722, Istanbul, Turkey
author
  • Politehnica University of Bucharest, Faculty of Applied Chemistry and Material Science, 1-7 Polizu Str., 011061 Bucharest, Romania
author
  • Politehnica University of Bucharest, Faculty of Applied Chemistry and Material Science, 1-7 Polizu Str., 011061 Bucharest, Romania
author
  • Marmara University, Department of Bioengineering, Faculty of Engineering, Ziverbey, Kadikoy 34722, Istanbul, Turkey
  • Marmara University, Advanced Nanomaterials Research Laboratory, Faculty of Technology, Ziverbey, Kadikoy 34722, Istanbul, Turkey
References
  • [1] R. Murugan, S. Ramakrishna, Composit. Sci. Tech. 65, 2385 (2005), doi: 10.1016/j.compscitech.2005.07.022
  • [2] B. Attaf, A. Ficai, E. Andronescu, G. Voicu, D. Ficai, Advances in Composite Materials for Medicine and Nanotechnology, 2011
  • [3] S. Shanmugam, B. Gopal, Ceram. Int. 40, 15655 (2014), doi: 10.1016/j.ceramint.2014.07.086
  • [4] M. Šupová, Ceram. Int. 41, 9203 (2015), doi: 10.1016/j.ceramint.2015.03.316
  • [5] E. Boanini, M. Gazzano, A. Bigi, Acta Biomater. 6, 1882 (2010), doi: 10.1016/j.actbio.2009.12.041
  • [6] B. Singh, A.K. Dubey, S. Kumar, N. Saha, B. Basu, R. Gupta, Mater. Sci. Eng. C. 31, 1320 (2011), doi: 10.1016/j.msec.2011.04.015
  • [7] N.R. Babu, T.S. Sampath Kumar, T.G. Prabhakar, V.S. Sastry, K.V.G.K. Murty, K.P. Rao, J. Biomed. Mater. Res. 29, 611 (2006)
  • [8] S.L. Iconaru, M. Motelica-Heino, D. Predoi, J. Spectroscopy 2013, 284285 (2013), doi: 10.1155/2013/284285
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv131n318kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.