PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 131 | 3 | 389-391
Article title

Welding Time Effect of Welding Joints in Micro Alloyed and TRIP 800 Steels in Resistance Spot Welding

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
This paper presents an analysis of resistance spot welds between micro alloyed steel sheets having 1 mm thickness and TRIP 800 (transformation-induced plasticity) steel sheets having 1.5 mm. TRIP 800 steel and micro alloyed steel sheets are used in automobile chassis and automobile body parts, respectively. In this study, resistance spot-welding method was used for joining steel pairs to be lap joint. A time and current controlled resistance spot welding machine having 120 kVA capacity, and pneumatic application mechanism were used in the experiments. Specimens prepared for spot welding operations were joined with different welding time ranging from 5 to 30 periods (1 period = 0.02 s) and different weld currents, ranging from 8.5 to 16.5 kA in 0.5 kA steps. The electrode force was kept constant at 6 kN. Tensile-peel tests were applied to the welded specimens. The effect of welding time parameter on tensile-peel properties was analyzed. The highest tensile-peel load was obtained using 15 periods.
Keywords
EN
Publisher

Year
Volume
131
Issue
3
Pages
389-391
Physical description
Dates
published
2017-03
Contributors
author
  • Sakarya University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, 54187 Sakarya, Turkey
author
  • Sakarya University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, 54187 Sakarya, Turkey
References
  • [1] S. Aslanlar, U. Özsaraç, E. Ferik, F. Varol, M. Ekici, in: 14th Int Materials Symp. (IMSP'2012), 2012, p. 833
  • [2] S.S. Nayak, V.H. Baltazar Hernandez, Y. Okita, Y. Zhou, Mater. Sci. Engin. A 551, 73 (2012), doi: 10.1016/j.msea.2012.04.096
  • [3] O.J. Kwon, K. Leeb, G. Kimc, K.-G. Chind, Mater. Sci. Forum 638-642, 136 (2010), doi: 10.4028/www.scientific.net/MSF.638-642.136
  • [4] S. Brauser, L.A. Pepke, G. Weber, M. Rethmeier, Mater. Sci. Engin. A 527, 7099 (2010), doi: 10.1016/j.msea.2010.07.091
  • [5] S. Dancette, D. Fabrčgue, V. Massardier, J. Merlin, T. Dupuy, V. Bouzekrib, Mater. Sci. Engin. A 78, 2259 (2011), doi: 10.1016/j.engfracmech.2011.04.013
  • [6] A. Al-Mukhtar, Adv. Engin. Forum 17, 31 (2016), doi: 10.4028/www.scientific.net/AEF.17.31
  • [7] P. Russo Spena, M. De Maddis, F. Lombardi, F. D'Aiuto, Appl. Mech. Mater. 423-426, 876 (2013), doi: 10.4028/www.scientific.net/AMM.423-426.876
  • [8] N. Akkaş, E. İlhan, Acta Phys. Pol. A 125, 497 (2014), doi: 10.12693/APhysPolA.125.497
  • [9] M. Balasubramanian, V. Balasubramanian, Acta Meatall. Sin. 23, 185 (2010), doi: 10.11890/1006-7191-103-185
  • [10] M. Tumuluru, Welding and Joining of Advanced High Strength Steels (AHSS) 2015, 55 (2015), doi: 10.1016/B978-0-85709-436-0.00004-7
  • [11] M.H. Razmpoosh, M. Shamanian, M. Esmailzadeh, Mater. Design 67, 571 (2015), doi: 10.1016/j.matdes.2014.10.090
  • [12] M. Pouranvari, Mater. Sci. Engin. A 546, 129 (2012), doi: 10.1016/j.msea.2012.03.040
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv131n317kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.