Effect of the Inclination of Mold Walls on Primary Cooling During the Continuous Casting of Steel

• Authors: M. Bourebia , M. Chaour , A. Lemoui , L. Laouar
• Languages of publication: EN

Abstracts

EN

The principal function of a continuous casting mold is to receive the liquid steel and ensure its cooling in order to permit the formation of a solidified and sufficiently resistant skin. This is the phase of primary cooling. The efficiency of this process depends on several parameters, such as the casting speed, the temperature exchange between the walls of the mold and the thin crust of the slab, as well as the conicity of continuous casting mold. The latter has been the subject of this work, which consists in investigation of the influence of the conicity of mold on the variation of the temperature field, and friction, generated during lowering of the slab. The numerical simulation was carried out using Fluent 6.0 code. The obtained curves reflect changes of the factors mentioned above as a functions of the conicity.

Keywords

EN

44.20.+b

Discipline

• 44.20.+b: Boundary layer heat flow

• Journal: Acta Physica Polonica A
• Year: 2017
• Volume: 131
• Issue: 3
• Pages: 359-361

Dates

published

2017-03

Contributors

author

M. Bourebia

• Research Centre in Industrial Technology. Crti. Ex-Csc, Algeria

author

M. Chaour

• Research Centre in Industrial Technology. Crti. Ex-Csc, Algeria

author

A. Lemoui

• University Badji Mokhtar Bp 12-2300, Laboratory of Shaping of Metallic Materials LMF2M, Annaba, Algeria

author

L. Laouar

• University Badji Mokhtar Bp 12-2300, Laboratory of Industrial Mechanics, Annaba, Algeria

References

• [1] C. Fréderic, ENSMP Ph.D. Thesis, Higher National School of Mines of Paris, 2004
• [2] M. Bensouici, Ph.D. Thesis, University Mentouri-Constantine, Faculty of Science Engineering, Mechanical Engineering Department, 2007
• [3] M. Bourebia, H. Maouche, S. Bouhouche, M. Chaour, S. Boulkroune, L. Laouar, in: Industrial Engineering and Operations Management (IEOM), IEEE, 2015, doi: 10.1109/IEOM.2015.7228105
• [4] M. Henri, Ph.D. Thesis, Higher National School of Mines of Paris, 2009
• [5] A. Ahcene, A. Bellaouar, M. Lachi, Numerical Modeling of 2D Temperature Field in the Area of Primary Cooling of Continuous Casting Machine in: Days of National Studies Mechanics, JENM' 2011
• [6] A. Bellaouar, O. Kholai, F. Daoud, in: 13th International Thermal Days, Jith 2007, p. 5
• [7] A. Bellaouar, O. Kholai, P. Valentin, Bull. Polytechnic Inst. Jassy LI, 77 (2005)

Identifiers

DOI

10.12693/APhysPolA.131.359