PL EN


Preferences help
enabled [disable] Abstract
Number of results
2017 | 131 | 1 | 39-42
Article title

Novel Molding Method and Enhanced Cell Homogeneity in the Powder Metallurgical Route for Production of Closed Cell Al-Foam

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
TiH₂ content, mixing, pressing, different mold filling rate as the factors which affect foaming process on the powder metallurgical route were investigated. TiH₂ was added in the amount of 0.5-1-1.5-2 wt% to adjust the proper amount. Differential scanning calorimetry tests were conducted on the TiH₂ powders in order to obtain optimum hydrogen releasing condition. Aluminum and TiH₂ powders were blended with the different speed-time combination. The mix was compacted at different pressures with the aim of explaining of the oxide layer deformation. An acceptance-rejection criterion was developed and used in pore analysis. Also, the using of a borosilicate glass molding technique are completely original and a new approach.
Keywords
Contributors
author
  • Kocaeli University, Ford Otosan Ihsaniye Vocational School of Automotive, Kocaeli, Turkey
author
  • Kocaeli University, Mechanical Eng. Dept., Kocaeli, Turkey
References
  • [1] M.F. Ashby, A.G. Evans, N.A. Fleck, L.J. Gibson, J.W. Hutchinson, H.N.G. Wadley, Metal Foams: A Design Guide, Butterworth Heinemann, Woburn 2000, doi: 10.1016/B978-075067219-1/50006-4
  • [2] J. Banhart, Prog. Mater. Sci. 46, 559 (2001), doi: 10.1016/s0079-6425(00)00002-5
  • [3] F. Baumgärtner, I. Duarte, J. Banhart, Adv. Eng. Mater. 2, 168 (2000)
  • [4] F. Garcia-Moreno, J. Banhart, Coll. Surf. A 309, 264 (2007), doi: 10.1016/j.colsurfa.2007.03.017
  • [5] I. Sridhar, N.A. Fleck, J. Mater. Sci. 40, 4005 (2005), doi: 10.1007/s10853-005-1916-9
  • [6] B. Zettl, H. Mayer, S.E. Stanzl-Tschegg, Int. J. Fatigue 23, 565 (2001), doi: 10.1016/S0142-1123(01)00025-1
  • [7] V. Crupi, R. Montanini, Int. J. Impact Eng. 34, 509 (2007), doi: 10.1016/j.ijimpeng.2005.10.001
  • [8] A. Rabiei, A.T. O'Neill, Mater. Sci. Eng. A Struct. 404, 159 (2005), doi: 10.1016/j.msea.2005.05.089
  • [9] L.J. Vendra, A. Rabiei, Mater. Sci. Eng. A Struct. 465, 59 (2007), doi: 10.1016/j.msea.2007.04.037
  • [10] M. Malekjafarian, S.K. Sadrnezhaad, Mater. Des. 42, 8 (2012), doi: 10.1016/j.matdes.2012.05.036
  • [11] E. Koza, M. Leonowicz, S. Wojciechowski, F. Simancik, Mater. Lett. 58, 132 (2003), doi: 10.1016/S0167-577X(03)00430-0
  • [12] L.Y. Aguirre-Perales, I.H. Jung, R.A.L. Drew, Acta Mater. 60, 759 (2012), doi: 10.1016/j.actamat.2011.10.011
  • [13] D. Mandrino, I. Paulin, S.D. Skapin, Mater. Character. 72, 87 (2012), doi: 10.1016/j.matchar.2012.07.005
  • [14] B.M. Lux, J. Banhart, S. Fiechter, O. Goerke, N. Wanderka, Acta Mater. 54, 1887 (2006), doi: 10.1016/j.actamat.2005.12.012
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv131n111kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.