PL EN


Preferences help
enabled [disable] Abstract
Number of results
2016 | 130 | 4 | 1155-1157
Article title

Corrosion Resistance of Tin Coatings Deposited by Different Methods

Content
Title variants
Languages of publication
EN
Abstracts
EN
This article describes the study of corrosion resistance of tin coatings deposited onto aluminum alloy substrates using the low pressure cold spraying and electroplating methods. The chemical corrosion resistance was examined using the Kesternich and cyclic salt spray tests inside SO₂ and NaCl climate chambers, respectively. The selected tests allowed simulation of the conditions of the coatings during service. The results were satisfactory for low pressure cold spraying coatings. Coatings produced by electroplating exhibit substantial corrosive losses due to their method of application and low thickness. Evaluation of corrosion were carried out by analyzing changes in the microstructure. Additionally, the physicochemical tests were carried out using X-ray diffraction to verify corrosion changes on the coatings surface.
Keywords
Contributors
author
  • Department of Materials Science, Strength and Welding Technology, Wrocław University of Technology, Wyb. Wyspiańskiego 27, PL-50370 Wrocław, Poland
  • Department of Materials Science, Strength and Welding Technology, Wrocław University of Technology, Wyb. Wyspiańskiego 27, PL-50370 Wrocław, Poland
author
  • Department of Mechanics, Materials Science and Engineering, Wrocław University of Technology, Wyb. Wyspiańskiego 27, PL-50370 Wrocław, Poland
  • Department of Materials Science, Strength and Welding Technology, Wrocław University of Technology, Wyb. Wyspiańskiego 27, PL-50370 Wrocław, Poland
  • Department of Materials Science, Strength and Welding Technology, Wrocław University of Technology, Wyb. Wyspiańskiego 27, PL-50370 Wrocław, Poland
author
  • Department of Materials Science, Strength and Welding Technology, Wrocław University of Technology, Wyb. Wyspiańskiego 27, PL-50370 Wrocław, Poland
References
  • [1] Ch.G. Munger, L.D. Vincent, Corrosion Protection by Protective Coatings, National Association of Corrosion Engineers, Houston 1999
  • [2] M.G. Fontana, Corrosion Engineering, Tata McGraw-Hill, New York 2005
  • [3] C.J. Evans, Tin Handbook, Huthig Jehle Rehm, Heidelberg 1994 http://www.bookdepository.com/publishers/Verlagsgruppe-Huthig-Jehle-Rehm-GmbH
  • [4] J.R. Davis, Handbook of Thermal Spray Technology, ASM International, Materials Park 2004
  • [5] V.K. Champagne, The Cold Spray Materials Deposition Process - Fundamentals and Applications, Woodhead Publ., Cambridge 2007
  • [6] R.G. Maev, V. Leshchynsky, Introduction to Low Pressure Gas Dynamic Spray, Wiley-VCH, Weinheim 2008, doi: 10.1002/9783527621903
  • [7] G.O. Mallory, J.B. Hajdu, Electroless Plating: Fundamentals and Applications, Cambridge University Press, Cambridge 1990
  • [8] F.J. Monteiro, M.A. Barbosa, Surf. Coat. Technol. 35, 321 (1988)
  • [9] W. Deqing, S. Ziyuan, K. Tangshan, Surf. Coat. Technol. 191, 324 (2005), doi: 10.1016/j.surfcoat.2004.03.049
  • [10] L. Wu, J. Zhao, Y. Xie, Z. Yang, Trans. Nonferrous. Met. Soc. China 20, 630 (2010), doi: 10.1016/S1003-6326(10)60552-3
  • [11] Standard: Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution, PN-EN ISO 16701, Polish Standards Association, Poland 2010 http://sklep.pkn.pl/pn-en-iso-16701-2015-08e.html
  • [12] Standard: Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture, PN-EN ISO 6988, Polish Standards Association, Poland 2000 http://sklep.pkn.pl/pn-en-iso-6988-2000p.html
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv130n499kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.