Effect of Rolling with Cyclic Movement of Rolls Method on Structure and Hardness of CuCr0.6 Alloy

• Authors: K. Rodak , A. Urbańczyk-Gucwa , K. Radwański
• Languages of publication: EN

Abstracts

EN

A novel severe plastic deformation method entitled rolling with cyclic movement of rolls was proposed to fabricate ultrafine grained CuCr0.6 copper alloy. The alloy in the solution treated conditions was processed by rolling with cyclic movement of rolls method by using process parameters as amplitude of rolls movement (A = 0.9 mm), frequency of rolls movement (f = 1 Hz), rolling reduction (ε_{h} = 50%) and rolling rate (v = 1, v = 2, v = 3 rpm). Light microscopy, scanning electron microscopy and a electron backscattering diffraction detector, and scanning transmission electron microscopy were used for microstructural characterization, and hardness tests for a preliminary assessment of mechanical properties. Quantitative studies of the average diameter of the subgrains d (μm) and the average diameter of the grains D (μm) were performed using the scanning electron microscopy/electron backscattering diffraction method. Misorientation angles were analyzed by the Kikuchi-line technique using TSL-OIM software. The results show that the samples underwent very high strain at the lateral areas and smaller at the central areas. As a result, the microstructure became heterogeneous and remained unchanged with change in compression rate. The transverse movement of rolls causes in the material significant effect of refining structure in peripheral areas of sample.

Keywords

EN

62.20.F-; 61.72.Ff; 81.05.Bx; 81.40.Rs; 83.50.-v

Discipline

• 62.20.F-: Deformation and plasticity(see also 83.50.-v Deformation and flow in rheology; for materials treatment effects on deformation, see 81.40.Lm)
• 83.50.-v: Deformation and flow
• 81.40.Rs: Electrical and magnetic properties related to treatment conditions
• 81.05.Bx: Metals, semimetals, and alloys
• 61.72.Ff: Direct observation of dislocations and other defects (etch pits, decoration, electron microscopy, x-ray topography, etc.)

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 130
• Issue: 4
• Pages: 1151-1154

Dates

published

2016-10

Contributors

author

K. Rodak

• Silesian University of Technology, Faculty of Materials Science and Metallurgy, Z. Krasińskiego 8, 40-019 Katowice, Poland

author

A. Urbańczyk-Gucwa

• Silesian University of Technology, Faculty of Materials Science and Metallurgy, Z. Krasińskiego 8, 40-019 Katowice, Poland

author

K. Radwański

• Institute for Ferrous Metallurgy, K. Miarki 12-14, 44-100 Gliwice, Poland

References

• [1] J. Stobrawa, Z. Rdzawski, W. Głuchowski, W. Malec, Archiv. Met. Mater. 33, 166 (2009) http://www.journalamme.org/papers_vol33_2/3327.pdf
• [2] B.L. Li, N. Tsuji, N. Kamikawa, Mater. Sci. Eng. A 423, 331 (2006), doi: 10.1016/j.msea.2006.02.028
• [3] Patent no. PL 203220 B1 http://pubserv.uprp.pl/PublicationServer/Temp/5sr1shmrkfhcoa16igemcpfk73/PL203220B1.pdf
• [4] Z. Cyganek, K. Rodak, F. Grosman, Archiv. Civ. Mech. Eng. 13, 7 (2013), doi: 10.1016/j.acme.2012.10.008
• [5] A. Vinogradov, T. Ishida, K. Kitagawa, V.I. Kopylov,Acta Mater. 53, 2181 (2005), doi: 10.1016/j.actamat.2005.01.046
• [6] C.Z. Xu, Q.J. Wang, M.S. Zheng, J.W. Zhu, J.D. Li, M.Q. Huang, Q.M. Jia, Z.Z. Du, Mater. Sci. Eng. A 459, 303 (2007), doi: 10.1016/j.msea.2007.01.105
• [7] K.X. Wei, W. Wei, F. Wang, Q. Bu Do, I.V. Alexandrov, J. Hu, Mater. Sci. Eng. A 528, 1478 (2011), doi: 10.1016/j.msea.2010.10.059
• [8] J. Stobrawa, Z. Rdzawski, W. Gluchowski, W. Malec, Archiv. Met. Mater. 56, 171 (2011), doi: 10.2478/v10172-011-0020-1
• [9] D. Orlov, Y. Beygelzimer, S. Synkov, V. Varyukhin, N. Tsuji, Z. Horita, Mater. Trans. 50, 96 (2009), doi: 10.2320/matertrans.MD200802
• [10] R. Kuziak, Modelings of structure changes and phase transformations occurring in the process of thermo-plastic steel, Instytut Metalurgii Żelaza, Gliwice 2005 (in Polish)
• [11] J. Stobrawa, Z. Rdzawki, W. Gluchowski, W. Malec, Arch. Mat. Man. Eng. 33, 166 (2009), doi: 10.2320/matertrans.MD200802

Identifiers

DOI

10.12693/APhysPolA.130.1151